| Message ID | 20190327162906.6010-1-erik.stromdahl@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ath10k: remove iteration in wake_tx_queue | expand |
On 03/27/2019 09:29 AM, Erik Stromdahl wrote: > Iterating the TX queue and thereby dequeuing all available packets in the > queue could result in performance penalties on some SMP systems. > Please share the test results and numbers you've run to help others thoughts. Thanks, Peter
On 3/27/19 6:49 PM, Peter Oh wrote: > > > On 03/27/2019 09:29 AM, Erik Stromdahl wrote: >> Iterating the TX queue and thereby dequeuing all available packets in the >> queue could result in performance penalties on some SMP systems. >> > Please share the test results and numbers you've run to help others > thoughts. > I haven't run any tests with ath10k PCIe, but Yibo Zhao had noticed a 10% degradation without this patch. Yibo: Can you provide iperf results etc. that shows the performance gain? -- Erik
Erik Stromdahl <erik.stromdahl@gmail.com> writes: > Iterating the TX queue and thereby dequeuing all available packets in the > queue could result in performance penalties on some SMP systems. > > The reason for this is most likely that the per-ac lock (active_txq_lock) > in mac80211 will be held by the CPU iterating the current queue. > > This will lock up other CPUs trying to push new messages on the TX > queue. > > Instead of iterating the queue we fetch just one packet at the time, > resulting in minimal starvation of the other CPUs. Did you test this with Felix' patches reducing the time the lock is held in mac80211? -Toke
On 2019-03-29 15:47, Erik Stromdahl wrote: > On 3/27/19 6:49 PM, Peter Oh wrote: >> >> >> On 03/27/2019 09:29 AM, Erik Stromdahl wrote: >>> Iterating the TX queue and thereby dequeuing all available packets in >>> the >>> queue could result in performance penalties on some SMP systems. >>> >> Please share the test results and numbers you've run to help others >> thoughts. >> > > I haven't run any tests with ath10k PCIe, but Yibo Zhao had noticed a > 10% > degradation without this patch. > > Yibo: > Can you provide iperf results etc. that shows the performance gain? My tests are based on ixchariot with cabled setup(two-core AP system). WDS mode--10% deviation: With previous change: UDP DL-1246 Mbps W/O previous change: UDP DL-987 Mbps Normal mode: With previous change: UDP DL-1380 Mbps W/O previous change: UDP DL-1310 Mbps Also attached the aqm status. With previous change: tid ac backlog-bytes backlog-packets new-flows drops marks overlimit collisions tx-bytes tx-packets flags 0 2 0 0 5342229 0 0 0 0 3867657029 5342229 0x0(RUN) 1 3 0 0 0 0 0 0 0 0 0 0x0(RUN) 2 3 0 0 0 0 0 0 0 0 0 0x0(RUN) 3 2 0 0 0 0 0 0 0 0 0 0x0(RUN) 4 1 0 0 0 0 0 0 0 0 0 0x0(RUN) 5 1 0 0 0 0 0 0 0 0 0 0x0(RUN) 6 0 0 0 2 0 0 0 0 144 2 0x0(RUN) 7 0 0 0 2 0 0 0 0 282 2 0x0(RUN) 8 2 0 0 0 0 0 0 0 0 0 0x0(RUN) 9 3 0 0 0 0 0 0 0 0 0 0x0(RUN) 10 3 0 0 0 0 0 0 0 0 0 0x0(RUN) 11 2 0 0 0 0 0 0 0 0 0 0x0(RUN) 12 1 0 0 0 0 0 0 0 0 0 0x0(RUN) 13 1 0 0 0 0 0 0 0 0 0 0x0(RUN) 14 0 0 0 0 0 0 0 0 0 0 0x0(RUN) 15 0 0 0 0 0 0 0 0 0 0 0x0(RUN) we see no difference between tx-packets and new-flows. W/O previous change: tid ac backlog-bytes backlog-packets new-flows drops marks overlimit collisions tx-bytes tx-packets flags 0 2 0 0 2233059 3 0 9236 12 1159661783 6380867 0x0(RUN) 1 3 0 0 0 0 0 0 0 0 0 0x0(RUN) 2 3 0 0 0 0 0 0 0 0 0 0x0(RUN) 3 2 0 0 0 0 0 0 0 0 0 0x0(RUN) 4 1 0 0 0 0 0 0 0 0 0 0x0(RUN) 5 1 0 0 0 0 0 0 0 0 0 0x0(RUN) 6 0 0 0 1 0 0 0 0 144 2 0x0(RUN) 7 0 0 0 1 0 0 0 0 282 2 0x0(RUN) 8 2 0 0 0 0 0 0 0 0 0 0x0(RUN) 9 3 0 0 0 0 0 0 0 0 0 0x0(RUN) 10 3 0 0 0 0 0 0 0 0 0 0x0(RUN) 11 2 0 0 0 0 0 0 0 0 0 0x0(RUN) 12 1 0 0 0 0 0 0 0 0 0 0x0(RUN) 13 1 0 0 0 0 0 0 0 0 0 0x0(RUN) 14 0 0 0 0 0 0 0 0 0 0 0x0(RUN) 15 0 0 0 0 0 0 0 0 0 0 0x0(RUN) new-flows are roughly one-third of the total tx-packets. > > -- > Erik
On 4/1/19 1:05 PM, Toke Høiland-Jørgensen wrote: > Erik Stromdahl <erik.stromdahl@gmail.com> writes: > >> Iterating the TX queue and thereby dequeuing all available packets in the >> queue could result in performance penalties on some SMP systems. >> >> The reason for this is most likely that the per-ac lock (active_txq_lock) >> in mac80211 will be held by the CPU iterating the current queue. >> >> This will lock up other CPUs trying to push new messages on the TX >> queue. >> >> Instead of iterating the queue we fetch just one packet at the time, >> resulting in minimal starvation of the other CPUs. > > Did you test this with Felix' patches reducing the time the lock is held > in mac80211? > > -Toke > Hi Toke, I am not aware of these patches. Can you please point them out for me? -- Erik
Erik Stromdahl <erik.stromdahl@gmail.com> writes: > On 4/1/19 1:05 PM, Toke Høiland-Jørgensen wrote: >> Erik Stromdahl <erik.stromdahl@gmail.com> writes: >> >>> Iterating the TX queue and thereby dequeuing all available packets in the >>> queue could result in performance penalties on some SMP systems. >>> >>> The reason for this is most likely that the per-ac lock (active_txq_lock) >>> in mac80211 will be held by the CPU iterating the current queue. >>> >>> This will lock up other CPUs trying to push new messages on the TX >>> queue. >>> >>> Instead of iterating the queue we fetch just one packet at the time, >>> resulting in minimal starvation of the other CPUs. >> >> Did you test this with Felix' patches reducing the time the lock is held >> in mac80211? >> >> -Toke >> > Hi Toke, > > I am not aware of these patches. Can you please point them out for me? They've already been merged. Commits dcec1d9bc8a7 and 7ef769459f14 in mac80211-next :) -Toke
On 4/16/19 9:07 PM, Toke Høiland-Jørgensen wrote: > Erik Stromdahl <erik.stromdahl@gmail.com> writes: > >> On 4/1/19 1:05 PM, Toke Høiland-Jørgensen wrote: >>> Erik Stromdahl <erik.stromdahl@gmail.com> writes: >>> >>>> Iterating the TX queue and thereby dequeuing all available packets in the >>>> queue could result in performance penalties on some SMP systems. >>>> >>>> The reason for this is most likely that the per-ac lock (active_txq_lock) >>>> in mac80211 will be held by the CPU iterating the current queue. >>>> >>>> This will lock up other CPUs trying to push new messages on the TX >>>> queue. >>>> >>>> Instead of iterating the queue we fetch just one packet at the time, >>>> resulting in minimal starvation of the other CPUs. >>> >>> Did you test this with Felix' patches reducing the time the lock is held >>> in mac80211? >>> >>> -Toke >>> >> Hi Toke, >> >> I am not aware of these patches. Can you please point them out for me? > > They've already been merged. Commits dcec1d9bc8a7 and 7ef769459f14 in > mac80211-next :) > > -Toke > I see. I am using the ath tree and I couldn't find them there. I can cherry-pick them to my own tree and try them out (or wait until Kalle updates ath.git). -- Erik
Erik Stromdahl <erik.stromdahl@gmail.com> writes: > On 4/16/19 9:07 PM, Toke Høiland-Jørgensen wrote: >> Erik Stromdahl <erik.stromdahl@gmail.com> writes: >> >>> On 4/1/19 1:05 PM, Toke Høiland-Jørgensen wrote: >>>> Erik Stromdahl <erik.stromdahl@gmail.com> writes: >>>> >>>>> Iterating the TX queue and thereby dequeuing all available packets in the >>>>> queue could result in performance penalties on some SMP systems. >>>>> >>>>> The reason for this is most likely that the per-ac lock (active_txq_lock) >>>>> in mac80211 will be held by the CPU iterating the current queue. >>>>> >>>>> This will lock up other CPUs trying to push new messages on the TX >>>>> queue. >>>>> >>>>> Instead of iterating the queue we fetch just one packet at the time, >>>>> resulting in minimal starvation of the other CPUs. >>>> >>>> Did you test this with Felix' patches reducing the time the lock is held >>>> in mac80211? >>>> >>>> -Toke >>>> >>> Hi Toke, >>> >>> I am not aware of these patches. Can you please point them out for me? >> >> They've already been merged. Commits dcec1d9bc8a7 and 7ef769459f14 in >> mac80211-next :) >> >> -Toke >> > > I see. I am using the ath tree and I couldn't find them there. > I can cherry-pick them to my own tree and try them out > (or wait until Kalle updates ath.git). It will take a while before these commits trickle down to ath-next branch, most likely after v5.2-rc1 is released.
Erik Stromdahl <erik.stromdahl@gmail.com> wrote: > Iterating the TX queue and thereby dequeuing all available packets in the > queue could result in performance penalties on some SMP systems. > > The reason for this is most likely that the per-ac lock (active_txq_lock) > in mac80211 will be held by the CPU iterating the current queue. > > This will lock up other CPUs trying to push new messages on the TX > queue. > > Instead of iterating the queue we fetch just one packet at the time, > resulting in minimal starvation of the other CPUs. > > Reported-by: Yibo Zhao <yiboz@codeaurora.org> > Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> Like others, I'm not convinced about this either. To me it looks like a quick workaround instead of properly investigating, and fixing, the root cause. To my understanding the throughput dip was caused by this commit: e3148cc5fecf ath10k: fix return value check in wake_tx_q op So to me it feels like the issue has been there all along, just hidden, and the fix above just exposed it.
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index b73c23d4ce86..c9e700b844f8 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -4356,7 +4356,6 @@ static void ath10k_mac_op_wake_tx_queue(struct ieee80211_hw *hw, struct ieee80211_txq *txq) { struct ath10k *ar = hw->priv; - int ret; u8 ac; ath10k_htt_tx_txq_update(hw, txq); @@ -4369,11 +4368,9 @@ static void ath10k_mac_op_wake_tx_queue(struct ieee80211_hw *hw, if (!txq) goto out; - while (ath10k_mac_tx_can_push(hw, txq)) { - ret = ath10k_mac_tx_push_txq(hw, txq); - if (ret < 0) - break; - } + if (ath10k_mac_tx_can_push(hw, txq)) + ath10k_mac_tx_push_txq(hw, txq); + ieee80211_return_txq(hw, txq); ath10k_htt_tx_txq_update(hw, txq); out:
Iterating the TX queue and thereby dequeuing all available packets in the queue could result in performance penalties on some SMP systems. The reason for this is most likely that the per-ac lock (active_txq_lock) in mac80211 will be held by the CPU iterating the current queue. This will lock up other CPUs trying to push new messages on the TX queue. Instead of iterating the queue we fetch just one packet at the time, resulting in minimal starvation of the other CPUs. Reported-by: Yibo Zhao <yiboz@codeaurora.org> Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com> --- drivers/net/wireless/ath/ath10k/mac.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)