diff mbox series

[v6,09/13] rockchip: rk3399: Add Nanopc T4 board support

Message ID 20190427114852.7608-10-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series rockchip: Add new rk3399 boards | expand

Commit Message

Jagan Teki April 27, 2019, 11:48 a.m. UTC 
Add initial support for Nanopc T4 board.

Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- 16GB eMMC
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 12V/2A

Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Add NanoPC-T4 IR receiver"
(sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3)

Tested-by: Daniel Gröber <dxld@darkboxed.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/dts/Makefile                     |  1 +
 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi |  7 ++
 arch/arm/dts/rk3399-nanopc-t4.dts         | 91 +++++++++++++++++++++++
 board/rockchip/evb_rk3399/MAINTAINERS     |  6 ++
 configs/nanopc-t4-rk3399_defconfig        | 58 +++++++++++++++
 5 files changed, 163 insertions(+)
 create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
 create mode 100644 configs/nanopc-t4-rk3399_defconfig

Comments

Jagan Teki April 28, 2019, 8:53 a.m. UTC | #1 
On Sat, Apr 27, 2019 at 5:19 PM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> Add initial support for Nanopc T4 board.
>
> Specification
> - Rockchip RK3399
> - Dual-Channel 4GB LPDDR3-1866
> - SD card slot
> - 16GB eMMC
> - RTL8211E 1Gbps
> - AP6356S WiFI/BT
> - HDMI In/Out, DP, MIPI DSI/CSI, eDP
> - USB 3.0, 2.0
> - USB Type C power and data
> - GPIO expansion ports
> - DC 12V/2A
>
> Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2:
> "arm64: dts: rockchip: Add NanoPC-T4 IR receiver"
> (sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3)
>
> Tested-by: Daniel Gröber <dxld@darkboxed.org>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  arch/arm/dts/Makefile                     |  1 +
>  arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi |  7 ++
>  arch/arm/dts/rk3399-nanopc-t4.dts         | 91 +++++++++++++++++++++++
>  board/rockchip/evb_rk3399/MAINTAINERS     |  6 ++
>  configs/nanopc-t4-rk3399_defconfig        | 58 +++++++++++++++
>  5 files changed, 163 insertions(+)
>  create mode 100644 arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
>  create mode 100644 arch/arm/dts/rk3399-nanopc-t4.dts
>  create mode 100644 configs/nanopc-t4-rk3399_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index d2ac26b556..e048565bb6 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
>         rk3399-evb.dtb \
>         rk3399-firefly.dtb \
>         rk3399-gru-bob.dtb \
> +       rk3399-nanopc-t4.dtb \
>         rk3399-nanopi-m4.dtb \
>         rk3399-orangepi.dtb \
>         rk3399-puma-ddr1333.dtb \
> diff --git a/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
> new file mode 100644
> index 0000000000..17201bcf41
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
> @@ -0,0 +1,7 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> + */
> +
> +#include "rk3399-nanopi4-u-boot.dtsi"
> +#include "rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi"
> diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
> new file mode 100644
> index 0000000000..84433cf02b
> --- /dev/null
> +++ b/arch/arm/dts/rk3399-nanopc-t4.dts
> @@ -0,0 +1,91 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * FriendlyElec NanoPC-T4 board device tree source
> + *
> + * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
> + * (http://www.friendlyarm.com)
> + *
> + * Copyright (c) 2018 Collabora Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399-nanopi4.dtsi"
> +
> +/ {
> +       model = "FriendlyElec NanoPC-T4";
> +       compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
> +
> +       vcc12v0_sys: vcc12v0-sys {
> +               compatible = "regulator-fixed";
> +               regulator-always-on;
> +               regulator-boot-on;
> +               regulator-max-microvolt = <12000000>;
> +               regulator-min-microvolt = <12000000>;
> +               regulator-name = "vcc12v0_sys";
> +       };
> +
> +       vcc5v0_host0: vcc5v0-host0 {
> +               compatible = "regulator-fixed";
> +               regulator-always-on;
> +               regulator-boot-on;
> +               regulator-name = "vcc5v0_host0";
> +               vin-supply = <&vcc5v0_sys>;
> +       };
> +
> +       adc-keys {
> +               compatible = "adc-keys";
> +               io-channels = <&saradc 1>;
> +               io-channel-names = "buttons";
> +               keyup-threshold-microvolt = <1800000>;
> +               poll-interval = <100>;
> +
> +               recovery {
> +                       label = "Recovery";
> +                       linux,code = <KEY_VENDOR>;
> +                       press-threshold-microvolt = <18000>;
> +               };
> +       };
> +
> +       ir-receiver {
> +               compatible = "gpio-ir-receiver";
> +               gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&ir_rx>;
> +       };
> +};
> +
> +&pinctrl {
> +       ir {
> +               ir_rx: ir-rx {
> +                       /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
> +                       rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
> +               };
> +       };
> +};
> +
> +&sdhci {
> +       mmc-hs400-1_8v;
> +       mmc-hs400-enhanced-strobe;
> +};
> +
> +&u2phy0_host {
> +       phy-supply = <&vcc5v0_host0>;
> +};
> +
> +&u2phy1_host {
> +       phy-supply = <&vcc5v0_host0>;
> +};
> +
> +&vcc5v0_sys {
> +       vin-supply = <&vcc12v0_sys>;
> +};
> +
> +&vcc3v3_sys {
> +       vin-supply = <&vcc12v0_sys>;
> +};
> +
> +&vbus_typec {
> +       enable-active-high;
> +       gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
> +       vin-supply = <&vcc5v0_sys>;
> +};
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index ae43805a6a..5917abb9c1 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -6,6 +6,12 @@ F:      include/configs/evb_rk3399.h
>  F:      configs/evb-rk3399_defconfig
>  F:      configs/firefly-rk3399_defconfig
>
> +NANOPC-T4
> +M:     Jagan Teki <jagan@amarulasolutions.com>
> +S:     Maintained
> +F:     configs/nanopic-t4-rk3399_defconfig
> +F:     arch/arm/dts/rk3399-nanopic-t4-u-boot.dtsi

Please remove i from above F list during merge.
Paul Kocialkowski May 7, 2019, 9:12 a.m. UTC | #2 
Hi,

On Sat, 2019-04-27 at 17:18 +0530, Jagan Teki wrote:
> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> index ae43805a6a..5917abb9c1 100644
> --- a/board/rockchip/evb_rk3399/MAINTAINERS
> +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> @@ -6,6 +6,12 @@ F:      include/configs/evb_rk3399.h
>  F:      configs/evb-rk3399_defconfig
>  F:      configs/firefly-rk3399_defconfig
>  
> +NANOPC-T4
> +M:	Jagan Teki <jagan@amarulasolutions.com>
> +S:	Maintained
> +F:	configs/nanopic-t4-rk3399_defconfig
> +F:	arch/arm/dts/rk3399-nanopic-t4-u-boot.dtsi
> +

Mhh, I feel like each new board that you are introducing should have
its own board directory -- this board is definitely not a rk3399 evb
made by rockchip, but another board.

I have already patches to split that for the firefly-rk3399, but I
cannot really test them outside of building.

>  NANOPI-M4
>  M:	Jagan Teki <jagan@amarulasolutions.com>
>  S:	Maintained
> diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
> new file mode 100644
> index 0000000000..7ba4f85485
> --- /dev/null
> +++ b/configs/nanopc-t4-rk3399_defconfig
> @@ -0,0 +1,58 @@

Also I don't see which TARGET is selected here, is there a fallback on
the RK3399 EVB for the rk3399 platform?

Cheers,

Paul

> +CONFIG_ARM=y
> +CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SYS_TEXT_BASE=0x00200000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x4000
> +CONFIG_ROCKCHIP_RK3399=y
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_DEBUG_UART_BASE=0xFF1A0000
> +CONFIG_DEBUG_UART_CLOCK=24000000
> +CONFIG_SPL_STACK_R_ADDR=0x80000
> +CONFIG_DEBUG_UART=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_CMD_BOOTZ=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TIME=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4"
> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_ROCKCHIP_GPIO=y
> +CONFIG_SYS_I2C_ROCKCHIP=y
> +CONFIG_MMC_DW=y
> +CONFIG_MMC_DW_ROCKCHIP=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ROCKCHIP=y
> +CONFIG_DM_ETH=y
> +CONFIG_ETH_DESIGNWARE=y
> +CONFIG_GMAC_ROCKCHIP=y
> +CONFIG_PMIC_RK8XX=y
> +CONFIG_REGULATOR_PWM=y
> +CONFIG_REGULATOR_RK8XX=y
> +CONFIG_PWM_ROCKCHIP=y
> +CONFIG_BAUDRATE=1500000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYSRESET=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_XHCI_DWC3=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_EHCI_GENERIC=y
> +CONFIG_USB_HOST_ETHER=y
> +CONFIG_USB_ETHER_ASIX=y
> +CONFIG_USB_ETHER_ASIX88179=y
> +CONFIG_USB_ETHER_MCS7830=y
> +CONFIG_USB_ETHER_RTL8152=y
> +CONFIG_USB_ETHER_SMSC95XX=y
> +CONFIG_USE_TINY_PRINTF=y
> +CONFIG_ERRNO_STR=y
Jagan Teki May 7, 2019, 12:28 p.m. UTC | #3 
On Tue, May 7, 2019 at 2:42 PM Paul Kocialkowski
<paul.kocialkowski@bootlin.com> wrote:
>
> Hi,
>
> On Sat, 2019-04-27 at 17:18 +0530, Jagan Teki wrote:
> > diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
> > index ae43805a6a..5917abb9c1 100644
> > --- a/board/rockchip/evb_rk3399/MAINTAINERS
> > +++ b/board/rockchip/evb_rk3399/MAINTAINERS
> > @@ -6,6 +6,12 @@ F:      include/configs/evb_rk3399.h
> >  F:      configs/evb-rk3399_defconfig
> >  F:      configs/firefly-rk3399_defconfig
> >
> > +NANOPC-T4
> > +M:   Jagan Teki <jagan@amarulasolutions.com>
> > +S:   Maintained
> > +F:   configs/nanopic-t4-rk3399_defconfig
> > +F:   arch/arm/dts/rk3399-nanopic-t4-u-boot.dtsi
> > +
>
> Mhh, I feel like each new board that you are introducing should have
> its own board directory -- this board is definitely not a rk3399 evb
> made by rockchip, but another board.

The behavior of all these added boards remains similar like evb, so
instead of adding separate board directory with redundant code this
patch uses existing stuff. Idea is to make common board directory as
rk3399, that have separate rework planed.

>
> I have already patches to split that for the firefly-rk3399, but I
> cannot really test them outside of building.

Do you have any specific board code for this firefly, I would suggest
to keep use evb since most of the peripheral handling in rockchip done
via dt so we can go-ahead w/o separating the board code atleast for
these boards.

>
> >  NANOPI-M4
> >  M:   Jagan Teki <jagan@amarulasolutions.com>
> >  S:   Maintained
> > diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
> > new file mode 100644
> > index 0000000000..7ba4f85485
> > --- /dev/null
> > +++ b/configs/nanopc-t4-rk3399_defconfig
> > @@ -0,0 +1,58 @@
>
> Also I don't see which TARGET is selected here, is there a fallback on
> the RK3399 EVB for the rk3399 platform?

It will select the EVB from mach-rockchip by default, ie reason I
didn't mentioned explicitly.
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d2ac26b556..e048565bb6 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,6 +87,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3399-evb.dtb \
 	rk3399-firefly.dtb \
 	rk3399-gru-bob.dtb \
+	rk3399-nanopc-t4.dtb \
 	rk3399-nanopi-m4.dtb \
 	rk3399-orangepi.dtb \
 	rk3399-puma-ddr1333.dtb \
diff --git a/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
new file mode 100644
index 0000000000..17201bcf41
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
@@ -0,0 +1,7 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include "rk3399-nanopi4-u-boot.dtsi"
+#include "rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi"
diff --git a/arch/arm/dts/rk3399-nanopc-t4.dts b/arch/arm/dts/rk3399-nanopc-t4.dts
new file mode 100644
index 0000000000..84433cf02b
--- /dev/null
+++ b/arch/arm/dts/rk3399-nanopc-t4.dts
@@ -0,0 +1,91 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPC-T4 board device tree source
+ *
+ * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
+ * (http://www.friendlyarm.com)
+ *
+ * Copyright (c) 2018 Collabora Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi4.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPC-T4";
+	compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
+
+	vcc12v0_sys: vcc12v0-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <12000000>;
+		regulator-min-microvolt = <12000000>;
+		regulator-name = "vcc12v0_sys";
+	};
+
+	vcc5v0_host0: vcc5v0-host0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "vcc5v0_host0";
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <18000>;
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_rx>;
+	};
+};
+
+&pinctrl {
+	ir {
+		ir_rx: ir-rx {
+			/* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
+			rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
+		};
+	};
+};
+
+&sdhci {
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_host0>;
+};
+
+&u2phy1_host {
+	phy-supply = <&vcc5v0_host0>;
+};
+
+&vcc5v0_sys {
+	vin-supply = <&vcc12v0_sys>;
+};
+
+&vcc3v3_sys {
+	vin-supply = <&vcc12v0_sys>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+	vin-supply = <&vcc5v0_sys>;
+};
diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS
index ae43805a6a..5917abb9c1 100644
--- a/board/rockchip/evb_rk3399/MAINTAINERS
+++ b/board/rockchip/evb_rk3399/MAINTAINERS
@@ -6,6 +6,12 @@  F:      include/configs/evb_rk3399.h
 F:      configs/evb-rk3399_defconfig
 F:      configs/firefly-rk3399_defconfig
 
+NANOPC-T4
+M:	Jagan Teki <jagan@amarulasolutions.com>
+S:	Maintained
+F:	configs/nanopic-t4-rk3399_defconfig
+F:	arch/arm/dts/rk3399-nanopic-t4-u-boot.dtsi
+
 NANOPI-M4
 M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
new file mode 100644
index 0000000000..7ba4f85485
--- /dev/null
+++ b/configs/nanopc-t4-rk3399_defconfig
@@ -0,0 +1,58 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_ASIX88179=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_ERRNO_STR=y