diff mbox series

[v2,2/3] staging: vchiq: revert "switch to wait_for_completion_killable"

Message ID 20190506144030.29056-3-nsaenzjulienne@suse.de (mailing list archive)
State New, archived
Headers show
Series staging: vchiq: use interruptible waits | expand

Commit Message

Nicolas Saenz Julienne May 6, 2019, 2:40 p.m. UTC
The killable version of wait_for_completion() is meant to be used on
situations where it should not fail at all costs, but still have the
convenience of being able to kill it if really necessary. VCHIQ doesn't
fit this criteria, as it's mainly used as an interface to V4L2 and ALSA
devices.

Fixes: a772f116702e ("staging: vchiq: switch to wait_for_completion_killable")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

This reverts commit a772f116702e3f0afdd7e6acadc1b8fb3b20b9ff.
---
 .../interface/vchiq_arm/vchiq_arm.c           | 21 ++++++++++---------
 .../interface/vchiq_arm/vchiq_core.c          | 21 ++++++++++---------
 .../interface/vchiq_arm/vchiq_util.c          |  6 +++---
 3 files changed, 25 insertions(+), 23 deletions(-)

Comments

Dan Carpenter May 6, 2019, 3:20 p.m. UTC | #1
On Mon, May 06, 2019 at 04:40:29PM +0200, Nicolas Saenz Julienne wrote:
> @@ -1740,7 +1740,8 @@ parse_rx_slots(struct vchiq_state *state)
>  					&service->bulk_rx : &service->bulk_tx;
>  
>  				DEBUG_TRACE(PARSE_LINE);
> -				if (mutex_lock_killable(&service->bulk_mutex)) {
> +				if (mutex_lock_killable(
> +					&service->bulk_mutex) != 0) {

This series does't add != 0 consistently...  Personally, I would prefer
we just leave it out.  I use != 0 for two things.  1)  When I'm talking
about the number zero.

	if (len == 0) {

Or with strcmp():

	if (strcmp(a, b) == 0) { // a equals b
	if (strcmp(a, b) < 0) {  // a less than b.

But here zero means no errors, so I would just leave it out...

regards,
dan carpenter
Nicolas Saenz Julienne May 6, 2019, 3:59 p.m. UTC | #2
Hi Dan, thanks for reviewing.

On Mon, 2019-05-06 at 18:20 +0300, Dan Carpenter wrote:
> On Mon, May 06, 2019 at 04:40:29PM +0200, Nicolas Saenz Julienne wrote:
> > @@ -1740,7 +1740,8 @@ parse_rx_slots(struct vchiq_state *state)
> >  					&service->bulk_rx : &service->bulk_tx;
> >  
> >  				DEBUG_TRACE(PARSE_LINE);
> > -				if (mutex_lock_killable(&service->bulk_mutex)) {
> > +				if (mutex_lock_killable(
> > +					&service->bulk_mutex) != 0) {
> 
> This series does't add != 0 consistently...  Personally, I would prefer
> we just leave it out.  I use != 0 for two things.  1)  When I'm talking
> about the number zero.
> 
> 	if (len == 0) {
> 
> Or with strcmp():
> 
> 	if (strcmp(a, b) == 0) { // a equals b
> 	if (strcmp(a, b) < 0) {  // a less than b.
> 
> But here zero means no errors, so I would just leave it out...

I agree, I'll fix it.

Regards,
Nicolas
Stefan Wahren May 6, 2019, 4:28 p.m. UTC | #3
Hi Nicolas,

Am 06.05.19 um 17:59 schrieb Nicolas Saenz Julienne:
> Hi Dan, thanks for reviewing.
>
> On Mon, 2019-05-06 at 18:20 +0300, Dan Carpenter wrote:
>> On Mon, May 06, 2019 at 04:40:29PM +0200, Nicolas Saenz Julienne wrote:
>>> @@ -1740,7 +1740,8 @@ parse_rx_slots(struct vchiq_state *state)
>>>  					&service->bulk_rx : &service->bulk_tx;
>>>  
>>>  				DEBUG_TRACE(PARSE_LINE);
>>> -				if (mutex_lock_killable(&service->bulk_mutex)) {
>>> +				if (mutex_lock_killable(
>>> +					&service->bulk_mutex) != 0) {
>> This series does't add != 0 consistently...  Personally, I would prefer
>> we just leave it out.  I use != 0 for two things.  1)  When I'm talking
>> about the number zero.
>>
>> 	if (len == 0) {
>>
>> Or with strcmp():
>>
>> 	if (strcmp(a, b) == 0) { // a equals b
>> 	if (strcmp(a, b) < 0) {  // a less than b.
>>
>> But here zero means no errors, so I would just leave it out...
> I agree, I'll fix it.

i also agree with Dan, but this specific patch should revert the changes
of a772f116702e3f0afdd7e6acadc1b8fb3b20b9ff . So mentioned style issue
should be fixed in a separate patch.

Regards Stefan

>
> Regards,
> Nicolas
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Dan Carpenter May 7, 2019, 5:54 a.m. UTC | #4
On Mon, May 06, 2019 at 04:40:29PM +0200, Nicolas Saenz Julienne wrote:
> The killable version of wait_for_completion() is meant to be used on
> situations where it should not fail at all costs, but still have the
> convenience of being able to kill it if really necessary. VCHIQ doesn't
> fit this criteria, as it's mainly used as an interface to V4L2 and ALSA
> devices.
> 
> Fixes: a772f116702e ("staging: vchiq: switch to wait_for_completion_killable")
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> 
> This reverts commit a772f116702e3f0afdd7e6acadc1b8fb3b20b9ff.
> ---

Git just sets you up for failure with its revert.  That code was from
when git was really new and now everyone gets annoyed when they see a
raw git hash without a human readable subject.  Just say at the start of
the commit message:

This reverts commit a772f116702e ("staging: vchiq: switch to
wait_for_completion_killable").

The killable version of wait_for_completion() is meant to be used on
situations where it should not fail at all costs, but still have the
convenience of being able to kill it if really necessary. VCHIQ doesn't
fit this criteria, as it's mainly used as an interface to V4L2 and ALSA
devices.

Fixes: a772f116702e ("staging: vchiq: switch to wait_for_completion_killable")

regards,
dan carpenter
diff mbox series

Patch

diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
index 064d0db4c51e..ccfb8218b83c 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
@@ -560,7 +560,8 @@  add_completion(VCHIQ_INSTANCE_T instance, VCHIQ_REASON_T reason,
 		vchiq_log_trace(vchiq_arm_log_level,
 			"%s - completion queue full", __func__);
 		DEBUG_COUNT(COMPLETION_QUEUE_FULL_COUNT);
-		if (wait_for_completion_killable( &instance->remove_event)) {
+		if (wait_for_completion_interruptible(
+					&instance->remove_event)) {
 			vchiq_log_info(vchiq_arm_log_level,
 				"service_callback interrupted");
 			return VCHIQ_RETRY;
@@ -671,7 +672,7 @@  service_callback(VCHIQ_REASON_T reason, struct vchiq_header *header,
 			}
 
 			DEBUG_TRACE(SERVICE_CALLBACK_LINE);
-			if (wait_for_completion_killable(
+			if (wait_for_completion_interruptible(
 						&user_service->remove_event)
 				!= 0) {
 				vchiq_log_info(vchiq_arm_log_level,
@@ -1006,7 +1007,7 @@  vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		   has been closed until the client library calls the
 		   CLOSE_DELIVERED ioctl, signalling close_event. */
 		if (user_service->close_pending &&
-			wait_for_completion_killable(
+			wait_for_completion_interruptible(
 				&user_service->close_event))
 			status = VCHIQ_RETRY;
 		break;
@@ -1182,7 +1183,7 @@  vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 			DEBUG_TRACE(AWAIT_COMPLETION_LINE);
 			mutex_unlock(&instance->completion_mutex);
-			rc = wait_for_completion_killable(
+			rc = wait_for_completion_interruptible(
 						&instance->insert_event);
 			mutex_lock(&instance->completion_mutex);
 			if (rc != 0) {
@@ -1352,7 +1353,7 @@  vchiq_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			do {
 				spin_unlock(&msg_queue_spinlock);
 				DEBUG_TRACE(DEQUEUE_MESSAGE_LINE);
-				if (wait_for_completion_killable(
+				if (wait_for_completion_interruptible(
 					&user_service->insert_event)) {
 					vchiq_log_info(vchiq_arm_log_level,
 						"DEQUEUE_MESSAGE interrupted");
@@ -2360,7 +2361,7 @@  vchiq_keepalive_thread_func(void *v)
 	while (1) {
 		long rc = 0, uc = 0;
 
-		if (wait_for_completion_killable(&arm_state->ka_evt)
+		if (wait_for_completion_interruptible(&arm_state->ka_evt)
 				!= 0) {
 			vchiq_log_error(vchiq_susp_log_level,
 				"%s interrupted", __func__);
@@ -2611,7 +2612,7 @@  block_resume(struct vchiq_arm_state *arm_state)
 		write_unlock_bh(&arm_state->susp_res_lock);
 		vchiq_log_info(vchiq_susp_log_level, "%s wait for previously "
 			"blocked clients", __func__);
-		if (wait_for_completion_killable_timeout(
+		if (wait_for_completion_interruptible_timeout(
 				&arm_state->blocked_blocker, timeout_val)
 					<= 0) {
 			vchiq_log_error(vchiq_susp_log_level, "%s wait for "
@@ -2637,7 +2638,7 @@  block_resume(struct vchiq_arm_state *arm_state)
 		write_unlock_bh(&arm_state->susp_res_lock);
 		vchiq_log_info(vchiq_susp_log_level, "%s wait for resume",
 			__func__);
-		if (wait_for_completion_killable_timeout(
+		if (wait_for_completion_interruptible_timeout(
 				&arm_state->vc_resume_complete, timeout_val)
 					<= 0) {
 			vchiq_log_error(vchiq_susp_log_level, "%s wait for "
@@ -2844,7 +2845,7 @@  vchiq_arm_force_suspend(struct vchiq_state *state)
 	do {
 		write_unlock_bh(&arm_state->susp_res_lock);
 
-		rc = wait_for_completion_killable_timeout(
+		rc = wait_for_completion_interruptible_timeout(
 				&arm_state->vc_suspend_complete,
 				msecs_to_jiffies(FORCE_SUSPEND_TIMEOUT_MS));
 
@@ -2940,7 +2941,7 @@  vchiq_arm_allow_resume(struct vchiq_state *state)
 	write_unlock_bh(&arm_state->susp_res_lock);
 
 	if (resume) {
-		if (wait_for_completion_killable(
+		if (wait_for_completion_interruptible(
 			&arm_state->vc_resume_complete) < 0) {
 			vchiq_log_error(vchiq_susp_log_level,
 				"%s interrupted", __func__);
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
index 53f5a1cb4636..50189223f05b 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.c
@@ -590,7 +590,7 @@  reserve_space(struct vchiq_state *state, size_t space, int is_blocking)
 			remote_event_signal(&state->remote->trigger);
 
 			if (!is_blocking ||
-				(wait_for_completion_killable(
+				(wait_for_completion_interruptible(
 				&state->slot_available_event)))
 				return NULL; /* No space available */
 		}
@@ -860,7 +860,7 @@  queue_message(struct vchiq_state *state, struct vchiq_service *service,
 			spin_unlock(&quota_spinlock);
 			mutex_unlock(&state->slot_mutex);
 
-			if (wait_for_completion_killable(
+			if (wait_for_completion_interruptible(
 						&state->data_quota_event))
 				return VCHIQ_RETRY;
 
@@ -891,7 +891,7 @@  queue_message(struct vchiq_state *state, struct vchiq_service *service,
 				service_quota->slot_use_count);
 			VCHIQ_SERVICE_STATS_INC(service, quota_stalls);
 			mutex_unlock(&state->slot_mutex);
-			if (wait_for_completion_killable(
+			if (wait_for_completion_interruptible(
 						&service_quota->quota_event))
 				return VCHIQ_RETRY;
 			if (service->closing)
@@ -1740,7 +1740,8 @@  parse_rx_slots(struct vchiq_state *state)
 					&service->bulk_rx : &service->bulk_tx;
 
 				DEBUG_TRACE(PARSE_LINE);
-				if (mutex_lock_killable(&service->bulk_mutex)) {
+				if (mutex_lock_killable(
+					&service->bulk_mutex) != 0) {
 					DEBUG_TRACE(PARSE_LINE);
 					goto bail_not_ready;
 				}
@@ -2456,7 +2457,7 @@  vchiq_open_service_internal(struct vchiq_service *service, int client_id)
 			       QMFLAGS_IS_BLOCKING);
 	if (status == VCHIQ_SUCCESS) {
 		/* Wait for the ACK/NAK */
-		if (wait_for_completion_killable(&service->remove_event)) {
+		if (wait_for_completion_interruptible(&service->remove_event)) {
 			status = VCHIQ_RETRY;
 			vchiq_release_service_internal(service);
 		} else if ((service->srvstate != VCHIQ_SRVSTATE_OPEN) &&
@@ -2823,7 +2824,7 @@  vchiq_connect_internal(struct vchiq_state *state, VCHIQ_INSTANCE_T instance)
 	}
 
 	if (state->conn_state == VCHIQ_CONNSTATE_CONNECTING) {
-		if (wait_for_completion_killable(&state->connect))
+		if (wait_for_completion_interruptible(&state->connect))
 			return VCHIQ_RETRY;
 
 		vchiq_set_conn_state(state, VCHIQ_CONNSTATE_CONNECTED);
@@ -2922,7 +2923,7 @@  vchiq_close_service(VCHIQ_SERVICE_HANDLE_T handle)
 	}
 
 	while (1) {
-		if (wait_for_completion_killable(&service->remove_event)) {
+		if (wait_for_completion_interruptible(&service->remove_event)) {
 			status = VCHIQ_RETRY;
 			break;
 		}
@@ -2983,7 +2984,7 @@  vchiq_remove_service(VCHIQ_SERVICE_HANDLE_T handle)
 		request_poll(service->state, service, VCHIQ_POLL_REMOVE);
 	}
 	while (1) {
-		if (wait_for_completion_killable(&service->remove_event)) {
+		if (wait_for_completion_interruptible(&service->remove_event)) {
 			status = VCHIQ_RETRY;
 			break;
 		}
@@ -3066,7 +3067,7 @@  VCHIQ_STATUS_T vchiq_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle,
 		VCHIQ_SERVICE_STATS_INC(service, bulk_stalls);
 		do {
 			mutex_unlock(&service->bulk_mutex);
-			if (wait_for_completion_killable(
+			if (wait_for_completion_interruptible(
 						&service->bulk_remove_event)) {
 				status = VCHIQ_RETRY;
 				goto error_exit;
@@ -3143,7 +3144,7 @@  VCHIQ_STATUS_T vchiq_bulk_transfer(VCHIQ_SERVICE_HANDLE_T handle,
 
 	if (bulk_waiter) {
 		bulk_waiter->bulk = bulk;
-		if (wait_for_completion_killable(&bulk_waiter->event))
+		if (wait_for_completion_interruptible(&bulk_waiter->event))
 			status = VCHIQ_RETRY;
 		else if (bulk_waiter->actual == VCHIQ_BULK_ACTUAL_ABORTED)
 			status = VCHIQ_ERROR;
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c
index 55c5fd82b911..30deea1b57f7 100644
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c
+++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_util.c
@@ -80,7 +80,7 @@  void vchiu_queue_push(struct vchiu_queue *queue, struct vchiq_header *header)
 		return;
 
 	while (queue->write == queue->read + queue->size) {
-		if (wait_for_completion_killable(&queue->pop))
+		if (wait_for_completion_interruptible(&queue->pop))
 			flush_signals(current);
 	}
 
@@ -93,7 +93,7 @@  void vchiu_queue_push(struct vchiu_queue *queue, struct vchiq_header *header)
 struct vchiq_header *vchiu_queue_peek(struct vchiu_queue *queue)
 {
 	while (queue->write == queue->read) {
-		if (wait_for_completion_killable(&queue->push))
+		if (wait_for_completion_interruptible(&queue->push))
 			flush_signals(current);
 	}
 
@@ -107,7 +107,7 @@  struct vchiq_header *vchiu_queue_pop(struct vchiu_queue *queue)
 	struct vchiq_header *header;
 
 	while (queue->write == queue->read) {
-		if (wait_for_completion_killable(&queue->push))
+		if (wait_for_completion_interruptible(&queue->push))
 			flush_signals(current);
 	}