diff mbox series

[RFC,V2,01/11] dt-bindings: mt8183: Add binding for ISP Pass 1 reserved memory

Message ID 20190510015755.51495-2-jungo.lin@mediatek.com (mailing list archive)
State RFC
Headers show
Series [RFC,V2,01/11] dt-bindings: mt8183: Add binding for ISP Pass 1 reserved memory | expand

Commit Message

Jungo Lin May 10, 2019, 1:57 a.m. UTC
This patch adds the binding for describing the reserved
shared memory used to exchange ISP configuration and tuning
data between the co-processor and Pass 1 (P1) unit of the
camera ISP system on Mediatek SoCs.

Signed-off-by: Jungo Lin <jungo.lin@mediatek.com>
---
 .../mediatek,reserve-memory-cam-smem.txt      | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reserved-memory/mediatek,reserve-memory-cam-smem.txt

Comments

Rob Herring (Arm) May 14, 2019, 7:50 p.m. UTC | #1
On Fri, May 10, 2019 at 09:57:47AM +0800, Jungo Lin wrote:
> This patch adds the binding for describing the reserved
> shared memory used to exchange ISP configuration and tuning
> data between the co-processor and Pass 1 (P1) unit of the
> camera ISP system on Mediatek SoCs.
> 
> Signed-off-by: Jungo Lin <jungo.lin@mediatek.com>
> ---
>  .../mediatek,reserve-memory-cam-smem.txt      | 42 +++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reserved-memory/mediatek,reserve-memory-cam-smem.txt

See my comments on the other 2 camera related reserved-memory bindings.

Rob
Jungo Lin May 15, 2019, 1:02 p.m. UTC | #2
Hi Rob:

Thanks for your comments.

On Tue, 2019-05-14 at 14:50 -0500, Rob Herring wrote:
> On Fri, May 10, 2019 at 09:57:47AM +0800, Jungo Lin wrote:
> > This patch adds the binding for describing the reserved
> > shared memory used to exchange ISP configuration and tuning
> > data between the co-processor and Pass 1 (P1) unit of the
> > camera ISP system on Mediatek SoCs.
> > 
> > Signed-off-by: Jungo Lin <jungo.lin@mediatek.com>
> > ---
> >  .../mediatek,reserve-memory-cam-smem.txt      | 42 +++++++++++++++++++
> >  1 file changed, 42 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/reserved-memory/mediatek,reserve-memory-cam-smem.txt
> 
> See my comments on the other 2 camera related reserved-memory bindings.
> 

Ok, we will align DIP & FD drivers's implementation.

Best regards,

Jungo

> Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/reserved-memory/mediatek,reserve-memory-cam-smem.txt b/Documentation/devicetree/bindings/reserved-memory/mediatek,reserve-memory-cam-smem.txt
new file mode 100644
index 000000000000..65a967cff91e
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/mediatek,reserve-memory-cam-smem.txt
@@ -0,0 +1,42 @@ 
+Mediatek ISP Pass 1 Shared Memory binding
+
+This binding describes the shared memory, which serves the purpose of
+describing the shared memory region used to exchange data between Pass 1
+unit of Image Signal Processor (ISP) and the co-processor in Mediatek
+SoCs.
+
+The co-processor doesn't have the iommu so we need to use the physical
+address to access the shared buffer in the firmware.
+
+The Pass 1 unit of ISP can access memory through the iommu so it
+uses the dma address to access the memory region.
+(See iommu/mediatek,iommu.txt for the detailed description of Mediatek IOMMU)
+
+For additional details about reserved memory regions see reserved-memory.txt
+
+Required properties:
+
+- compatible: must be "mediatek,reserve-memory-cam-smem"
+
+- size: required for dynamic allocation. The unit is bytes.
+
+- alloc-range: required for dynamic allocation. The range must
+  between 0x40000000 and 0x100000000 due to the co-processer's
+  addressing limitation.
+
+Example:
+
+The following example shows the ISP Pass 1 shared memory setup for MT8183.
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		cam_mem_reserved: cam_mem_region {
+			compatible = "mediatek,reserve-memory-cam-smem";
+			size = <0 0x1400000>;
+			no-map;
+			alignment = <0 0x1000>;
+			alloc-ranges = <0 0x40000000 0 0x10000000>;
+		};
+	};