diff mbox series

[RFC,V2,03/11] dt-bindings: mt8183: Added camera ISP Pass 1

Message ID 20190510015755.51495-4-jungo.lin@mediatek.com (mailing list archive)
State RFC
Headers show
Series [v1] media: media_device_enum_links32: fix missing reserved field copy | expand

Commit Message

Jungo Lin May 10, 2019, 1:57 a.m. UTC 
This patch adds DT binding document for the Pass 1 (P1) unit in
Mediatek's camera ISP system. The Pass 1 unit grabs the sensor data
out from the sensor interface, applies ISP image effects from tuning
data and outputs the image data or statistics data to DRAM.

Signed-off-by: Jungo Lin <jungo.lin@mediatek.com>
---
 .../bindings/media/mediatek,camisp.txt        | 92 +++++++++++++++++++
 1 file changed, 92 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek,camisp.txt

Comments

Rob Herring (Arm) May 14, 2019, 7:54 p.m. UTC | #1 
On Fri, May 10, 2019 at 09:57:52AM +0800, Jungo Lin wrote:
> This patch adds DT binding document for the Pass 1 (P1) unit in
> Mediatek's camera ISP system. The Pass 1 unit grabs the sensor data
> out from the sensor interface, applies ISP image effects from tuning
> data and outputs the image data or statistics data to DRAM.
> 
> Signed-off-by: Jungo Lin <jungo.lin@mediatek.com>
> ---
>  .../bindings/media/mediatek,camisp.txt        | 92 +++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,camisp.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/mediatek,camisp.txt b/Documentation/devicetree/bindings/media/mediatek,camisp.txt
> new file mode 100644
> index 000000000000..759e55a5dfac
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,camisp.txt
> @@ -0,0 +1,92 @@
> +* Mediatek Image Signal Processor Pass 1 (ISP P1)
> +
> +The Pass 1 unit of Mediatek's camera ISP system grabs the sensor data out
> +from the sensor interface, applies ISP effects from tuning data and outputs
> +the image data and statistics data to DRAM. Furthermore, Pass 1 unit has
> +the ability to output two different resolutions frames at the same time to
> +increase the performance of the camera application.
> +
> +Required properties:
> +- compatible: Must be "mediatek,mt8183-camisp" for MT8183.
> +- reg: Must contain an entry for each entry in reg-names.

Must list reg-names here and define the values. Though, I don't find 
cam1, cam2, cam3 to be too useful.

> +- interrupts: interrupt number to the cpu.
> +- iommus: shall point to the respective IOMMU block with master port
> +  as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> +  for details.

How many entries?

> +- power-domains : a phandle to the power domain of this local arbiter.
> +- clocks: device clocks, see
> +  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- clock-names: must be "CAMSYS_CAM_CGPDN" and "CAMSYS_CAMTG_CGPDN".
> +- mediatek,larb: must contain the local arbiters in the current SOCs, see
> +  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> +  for details.
> +- mediatek,scp : the node of system control processor (SCP), see
> +  Documentation/devicetree/bindings/remoteproc/mtk,scp.txt for details.
> +- memory-region : the reserved shared memory region between Pass 1 unit and
> +  system control processor.
> +
> +Example:
> +SoC specific DT entry:
> +
> +	camisp: camisp@1a000000 {
> +		compatible = "mediatek,mt8183-camisp", "syscon";
> +		reg = <0 0x1a000000 0 0x1000>,
> +		      <0 0x1a003000 0 0x1000>,
> +		      <0 0x1a004000 0 0x2000>,
> +		      <0 0x1a006000 0 0x2000>;
> +		reg-names = "camisp",
> +		            "cam1",
> +		            "cam2",
> +		            "cam3";
> +		interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 254 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_SPI 255 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-names = "cam1",
> +				  "cam2",
> +				  "cam3";
> +		iommus = <&iommu M4U_PORT_CAM_LSCI0>,
> +			 <&iommu M4U_PORT_CAM_LSCI1>,
> +			 <&iommu M4U_PORT_CAM_BPCI>;
> +		#clock-cells = <1>;
> +		power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
> +		/* Camera CCF */
> +		clocks = <&camsys CLK_CAM_CAM>,
> +			 <&camsys CLK_CAM_CAMTG>;
> +		clock-names = "CAMSYS_CAM_CGPDN",
> +			      "CAMSYS_CAMTG_CGPDN";
> +		mediatek,larb = <&larb3>,
> +				<&larb6>;
> +		mediatek,scp = <&scp>;
> +		memory-region = <&cam_mem_reserved>;
> +	};
> +
> +Reserved memory specific DT entry (see reserved memory binding for more
> +information):
> +
> +Example:
> +SoC specific DT entry:
> +
> +	cam_mem_reserved: cam_mem_region {
> +		compatible = "mediatek,reserve-memory-cam-smem";
> +		no-map;
> +		size = <0 0x01400000>; / *20 MB share mem size */
> +		alignment = <0 0x1000>;
> +		alloc-ranges = <0 0x40000000 0 0x10000000>;
> +	};
> +
> +Mediatek ISP P1 supports a single port node with MIPI-CSI2 bus. It should
> +contain one 'port' child node with child 'endpoint' node. Please refer to
> +the bindings defined in Documentation/devicetree/bindings/media/video-interfaces.txt
> +and Documentation/devicetree/bindings/media/mediatek-seninf.txt.
> +
> +Example:
> +Board specific DT entry:

Don't split examples like this.

> +
> +	&camisp {
> +		port@0 {
> +			seninf_0: endpoint {
> +				remote-endpoint = <&seninf_core>;
> +			};
> +		};
> +	};
> +
> -- 
> 2.18.0
>
Jungo Lin May 16, 2019, 6:12 a.m. UTC | #2 
Hi, Rob:

Thanks for your comments.

On Tue, 2019-05-14 at 14:54 -0500, Rob Herring wrote:
> On Fri, May 10, 2019 at 09:57:52AM +0800, Jungo Lin wrote:
> > This patch adds DT binding document for the Pass 1 (P1) unit in
> > Mediatek's camera ISP system. The Pass 1 unit grabs the sensor data
> > out from the sensor interface, applies ISP image effects from tuning
> > data and outputs the image data or statistics data to DRAM.
> > 
> > Signed-off-by: Jungo Lin <jungo.lin@mediatek.com>
> > ---
> >  .../bindings/media/mediatek,camisp.txt        | 92 +++++++++++++++++++
> >  1 file changed, 92 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/mediatek,camisp.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/media/mediatek,camisp.txt b/Documentation/devicetree/bindings/media/mediatek,camisp.txt
> > new file mode 100644
> > index 000000000000..759e55a5dfac
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/mediatek,camisp.txt
> > @@ -0,0 +1,92 @@
> > +* Mediatek Image Signal Processor Pass 1 (ISP P1)
> > +
> > +The Pass 1 unit of Mediatek's camera ISP system grabs the sensor data out
> > +from the sensor interface, applies ISP effects from tuning data and outputs
> > +the image data and statistics data to DRAM. Furthermore, Pass 1 unit has
> > +the ability to output two different resolutions frames at the same time to
> > +increase the performance of the camera application.
> > +
> > +Required properties:
> > +- compatible: Must be "mediatek,mt8183-camisp" for MT8183.
> > +- reg: Must contain an entry for each entry in reg-names.
> 
> Must list reg-names here and define the values. Though, I don't find 
> cam1, cam2, cam3 to be too useful.
> 

Ok, we will list all our supported reg-names in next patch.

> > +- interrupts: interrupt number to the cpu.
> > +- iommus: shall point to the respective IOMMU block with master port
> > +  as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
> > +  for details.
> 
> How many entries?
> 

Basic, we just need to add only one master port for IOMMU property.
We will revise this and drop the other two ports.

> > +- power-domains : a phandle to the power domain of this local arbiter.
> > +- clocks: device clocks, see
> > +  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> > +- clock-names: must be "CAMSYS_CAM_CGPDN" and "CAMSYS_CAMTG_CGPDN".
> > +- mediatek,larb: must contain the local arbiters in the current SOCs, see
> > +  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
> > +  for details.
> > +- mediatek,scp : the node of system control processor (SCP), see
> > +  Documentation/devicetree/bindings/remoteproc/mtk,scp.txt for details.
> > +- memory-region : the reserved shared memory region between Pass 1 unit and
> > +  system control processor.
> > +
> > +Example:
> > +SoC specific DT entry:
> > +
> > +	camisp: camisp@1a000000 {
> > +		compatible = "mediatek,mt8183-camisp", "syscon";
> > +		reg = <0 0x1a000000 0 0x1000>,
> > +		      <0 0x1a003000 0 0x1000>,
> > +		      <0 0x1a004000 0 0x2000>,
> > +		      <0 0x1a006000 0 0x2000>;
> > +		reg-names = "camisp",
> > +		            "cam1",
> > +		            "cam2",
> > +		            "cam3";
> > +		interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_LOW>,
> > +			     <GIC_SPI 254 IRQ_TYPE_LEVEL_LOW>,
> > +			     <GIC_SPI 255 IRQ_TYPE_LEVEL_LOW>;
> > +		interrupt-names = "cam1",
> > +				  "cam2",
> > +				  "cam3";
> > +		iommus = <&iommu M4U_PORT_CAM_LSCI0>,
> > +			 <&iommu M4U_PORT_CAM_LSCI1>,
> > +			 <&iommu M4U_PORT_CAM_BPCI>;
> > +		#clock-cells = <1>;
> > +		power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
> > +		/* Camera CCF */
> > +		clocks = <&camsys CLK_CAM_CAM>,
> > +			 <&camsys CLK_CAM_CAMTG>;
> > +		clock-names = "CAMSYS_CAM_CGPDN",
> > +			      "CAMSYS_CAMTG_CGPDN";
> > +		mediatek,larb = <&larb3>,
> > +				<&larb6>;
> > +		mediatek,scp = <&scp>;
> > +		memory-region = <&cam_mem_reserved>;
> > +	};
> > +
> > +Reserved memory specific DT entry (see reserved memory binding for more
> > +information):
> > +
> > +Example:
> > +SoC specific DT entry:
> > +
> > +	cam_mem_reserved: cam_mem_region {
> > +		compatible = "mediatek,reserve-memory-cam-smem";
> > +		no-map;
> > +		size = <0 0x01400000>; / *20 MB share mem size */
> > +		alignment = <0 0x1000>;
> > +		alloc-ranges = <0 0x40000000 0 0x10000000>;
> > +	};
> > +
> > +Mediatek ISP P1 supports a single port node with MIPI-CSI2 bus. It should
> > +contain one 'port' child node with child 'endpoint' node. Please refer to
> > +the bindings defined in Documentation/devicetree/bindings/media/video-interfaces.txt
> > +and Documentation/devicetree/bindings/media/mediatek-seninf.txt.
> > +
> > +Example:
> > +Board specific DT entry:
> 
> Don't split examples like this.
> 

Ok, we will keep one example in next patch.

Best regards,

Jungo

> > +
> > +	&camisp {
> > +		port@0 {
> > +			seninf_0: endpoint {
> > +				remote-endpoint = <&seninf_core>;
> > +			};
> > +		};
> > +	};
> > +
> > -- 
> > 2.18.0
> > 
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/mediatek,camisp.txt b/Documentation/devicetree/bindings/media/mediatek,camisp.txt
new file mode 100644
index 000000000000..759e55a5dfac
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,camisp.txt
@@ -0,0 +1,92 @@ 
+* Mediatek Image Signal Processor Pass 1 (ISP P1)
+
+The Pass 1 unit of Mediatek's camera ISP system grabs the sensor data out
+from the sensor interface, applies ISP effects from tuning data and outputs
+the image data and statistics data to DRAM. Furthermore, Pass 1 unit has
+the ability to output two different resolutions frames at the same time to
+increase the performance of the camera application.
+
+Required properties:
+- compatible: Must be "mediatek,mt8183-camisp" for MT8183.
+- reg: Must contain an entry for each entry in reg-names.
+- interrupts: interrupt number to the cpu.
+- iommus: shall point to the respective IOMMU block with master port
+  as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+  for details.
+- power-domains : a phandle to the power domain of this local arbiter.
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must be "CAMSYS_CAM_CGPDN" and "CAMSYS_CAMTG_CGPDN".
+- mediatek,larb: must contain the local arbiters in the current SOCs, see
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  for details.
+- mediatek,scp : the node of system control processor (SCP), see
+  Documentation/devicetree/bindings/remoteproc/mtk,scp.txt for details.
+- memory-region : the reserved shared memory region between Pass 1 unit and
+  system control processor.
+
+Example:
+SoC specific DT entry:
+
+	camisp: camisp@1a000000 {
+		compatible = "mediatek,mt8183-camisp", "syscon";
+		reg = <0 0x1a000000 0 0x1000>,
+		      <0 0x1a003000 0 0x1000>,
+		      <0 0x1a004000 0 0x2000>,
+		      <0 0x1a006000 0 0x2000>;
+		reg-names = "camisp",
+		            "cam1",
+		            "cam2",
+		            "cam3";
+		interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 254 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 255 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "cam1",
+				  "cam2",
+				  "cam3";
+		iommus = <&iommu M4U_PORT_CAM_LSCI0>,
+			 <&iommu M4U_PORT_CAM_LSCI1>,
+			 <&iommu M4U_PORT_CAM_BPCI>;
+		#clock-cells = <1>;
+		power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
+		/* Camera CCF */
+		clocks = <&camsys CLK_CAM_CAM>,
+			 <&camsys CLK_CAM_CAMTG>;
+		clock-names = "CAMSYS_CAM_CGPDN",
+			      "CAMSYS_CAMTG_CGPDN";
+		mediatek,larb = <&larb3>,
+				<&larb6>;
+		mediatek,scp = <&scp>;
+		memory-region = <&cam_mem_reserved>;
+	};
+
+Reserved memory specific DT entry (see reserved memory binding for more
+information):
+
+Example:
+SoC specific DT entry:
+
+	cam_mem_reserved: cam_mem_region {
+		compatible = "mediatek,reserve-memory-cam-smem";
+		no-map;
+		size = <0 0x01400000>; / *20 MB share mem size */
+		alignment = <0 0x1000>;
+		alloc-ranges = <0 0x40000000 0 0x10000000>;
+	};
+
+Mediatek ISP P1 supports a single port node with MIPI-CSI2 bus. It should
+contain one 'port' child node with child 'endpoint' node. Please refer to
+the bindings defined in Documentation/devicetree/bindings/media/video-interfaces.txt
+and Documentation/devicetree/bindings/media/mediatek-seninf.txt.
+
+Example:
+Board specific DT entry:
+
+	&camisp {
+		port@0 {
+			seninf_0: endpoint {
+				remote-endpoint = <&seninf_core>;
+			};
+		};
+	};
+