| Message ID | 20190510130207.14330-3-pramod.kumar_1@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: dts: nxp: add ls1046a frwy board support | expand |
On Fri, May 10, 2019 at 01:00:20PM +0000, Pramod Kumar wrote: > ls1046afrwy board is based on nxp ls1046a SoC. > Board support's 4GB ddr memory, i2c, microSD card, > serial console,qspi nor flash,ifc nand flash,qsgmii network interface, > usb 3.0 and serdes interface to support two x1gen3 pcie interface. > > Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> > Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/fsl-ls1046a-frwy.dts | 156 ++++++++++++++++++ > 2 files changed, 157 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 13604e558dc1..84ff6995b41e 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb > +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb > dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > new file mode 100644 > index 000000000000..de0d19c02944 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts > @@ -0,0 +1,156 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Device Tree Include file for Freescale Layerscape-1046A family SoC. > + * > + * Copyright 2019 NXP. > + * > + */ > + > +/dts-v1/; > + > +#include "fsl-ls1046a.dtsi" > + > +/ { > + model = "LS1046A FRWY Board"; > + compatible = "fsl,ls1046a-frwy", "fsl,ls1046a"; > + > + aliases { > + serial0 = &duart0; > + serial1 = &duart1; > + serial2 = &duart2; > + serial3 = &duart3; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + sb_3v3: regulator-sb3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "LT8642SEV-3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > +}; > + > +&duart0 { > + status = "okay"; > +}; > + > +&duart1 { > + status = "okay"; > +}; > + > +&duart2 { > + status = "okay"; > +}; > + > +&duart3 { > + status = "okay"; > +}; > + > +&i2c0 { > + status = "okay"; > + > + i2c-mux@77 { > + compatible = "nxp,pca9546"; > + reg = <0x77>; > + #address-cells = <1>; > + #size-cells = <0>; > + i2c-mux-never-disable; Undocumented property? > + > + i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + eeprom@52 { > + compatible = "atmel,24c512"; > + reg = <0x52>; > + }; > + > + eeprom@53 { > + compatible = "atmel,24c512"; > + reg = <0x53>; > + }; > + > + power-monitor@40 { Sort the nodes in unit-address. Shawn > + compatible = "ti,ina220"; > + reg = <0x40>; > + shunt-resistor = <1000>; > + }; > + > + rtc@51 { > + compatible = "nxp,pcf2129"; > + reg = <0x51>; > + }; > + > + temperature-sensor@4c { > + compatible = "nxp,sa56004"; > + reg = <0x4c>; > + vcc-supply = <&sb_3v3>; > + }; > + > + }; > + }; > +}; > + > +&ifc { > + #address-cells = <2>; > + #size-cells = <1>; > + /* NAND Flash */ > + ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>; > + status = "okay"; > + > + nand@0,0 { > + compatible = "fsl,ifc-nand"; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0x0 0x0 0x10000>; > + }; > + > +}; > + > +#include "fsl-ls1046-post.dtsi" > + > +&fman0 { > + ethernet@e0000 { > + phy-handle = <&qsgmii_phy4>; > + phy-connection-type = "qsgmii"; > + }; > + > + ethernet@e8000 { > + phy-handle = <&qsgmii_phy2>; > + phy-connection-type = "qsgmii"; > + }; > + > + ethernet@ea000 { > + phy-handle = <&qsgmii_phy1>; > + phy-connection-type = "qsgmii"; > + }; > + > + ethernet@f2000 { > + phy-handle = <&qsgmii_phy3>; > + phy-connection-type = "qsgmii"; > + }; > + > + mdio@fd000 { > + qsgmii_phy1: ethernet-phy@1c { > + reg = <0x1c>; > + }; > + > + qsgmii_phy2: ethernet-phy@1d { > + reg = <0x1d>; > + }; > + > + qsgmii_phy3: ethernet-phy@1e { > + reg = <0x1e>; > + }; > + > + qsgmii_phy4: ethernet-phy@1f { > + reg = <0x1f>; > + }; > + }; > +}; > -- > 2.17.1 >
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 13604e558dc1..84ff6995b41e 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts new file mode 100644 index 000000000000..de0d19c02944 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2019 NXP. + * + */ + +/dts-v1/; + +#include "fsl-ls1046a.dtsi" + +/ { + model = "LS1046A FRWY Board"; + compatible = "fsl,ls1046a-frwy", "fsl,ls1046a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT8642SEV-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&duart2 { + status = "okay"; +}; + +&duart3 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-never-disable; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@52 { + compatible = "atmel,24c512"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + }; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NAND Flash */ + ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>; + status = "okay"; + + nand@0,0 { + compatible = "fsl,ifc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x10000>; + }; + +}; + +#include "fsl-ls1046-post.dtsi" + +&fman0 { + ethernet@e0000 { + phy-handle = <&qsgmii_phy4>; + phy-connection-type = "qsgmii"; + }; + + ethernet@e8000 { + phy-handle = <&qsgmii_phy2>; + phy-connection-type = "qsgmii"; + }; + + ethernet@ea000 { + phy-handle = <&qsgmii_phy1>; + phy-connection-type = "qsgmii"; + }; + + ethernet@f2000 { + phy-handle = <&qsgmii_phy3>; + phy-connection-type = "qsgmii"; + }; + + mdio@fd000 { + qsgmii_phy1: ethernet-phy@1c { + reg = <0x1c>; + }; + + qsgmii_phy2: ethernet-phy@1d { + reg = <0x1d>; + }; + + qsgmii_phy3: ethernet-phy@1e { + reg = <0x1e>; + }; + + qsgmii_phy4: ethernet-phy@1f { + reg = <0x1f>; + }; + }; +};