mbox series

[0/3] arm64: dts: meson: g12a: add i2c

Message ID 20190514101237.13969-1-jbrunet@baylibre.com (mailing list archive)
Headers show
Series arm64: dts: meson: g12a: add i2c | expand

Message

Jerome Brunet May 14, 2019, 10:12 a.m. UTC 
Add the i2c controllers and pinctrl definitions to the g12a DT then
the busses present on the u200 and sei510.

Notice the use of the pinconf DT property 'drive-strength-microamp'.
Support for this property is not yet merged in meson pinctrl driver but
the DT part as been acked by the DT maintainer [0] so it should be safe
to use.

[0]: https://lkml.kernel.org/r/20190513152451.GA25690@bogus

Guillaume La Roque (1):
  arm64: dts: meson: g12a: add i2c nodes

Jerome Brunet (2):
  arm64: dts: meson: u200: enable i2c busses
  arm64: dts: meson: sei510: enable i2c3

 .../boot/dts/amlogic/meson-g12a-sei510.dts    |   6 +
 .../boot/dts/amlogic/meson-g12a-u200.dts      |  21 ++
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi   | 268 ++++++++++++++++++
 3 files changed, 295 insertions(+)

Comments

Kevin Hilman May 20, 2019, 9:14 p.m. UTC | #1 
Jerome Brunet <jbrunet@baylibre.com> writes:

> Add the i2c controllers and pinctrl definitions to the g12a DT then
> the busses present on the u200 and sei510.
>
> Notice the use of the pinconf DT property 'drive-strength-microamp'.
> Support for this property is not yet merged in meson pinctrl driver but
> the DT part as been acked by the DT maintainer [0] so it should be safe
> to use.

Queued for v5.3,

Thanks,

Kevin