new file mode 100644
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ "#address-cells": true
+ "#size-cells": true
+
+ compatible:
+ const: allwinner,sun6i-a31-mipi-dsi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: mod
+
+ resets:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: dphy
+
+ port:
+ type: object
+ description:
+ A port node with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt. That
+ port should be the input endpoint, usually coming from the
+ associated TCON.
+
+patternProperties:
+ "^panel@[0-9]+$": true
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+ - resets
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ dsi0: dsi@1ca0000 {
+ compatible = "allwinner,sun6i-a31-mipi-dsi";
+ reg = <0x01ca0000 0x1000>;
+ interrupts = <0 89 4>;
+ clocks = <&ccu 23>, <&ccu 96>;
+ clock-names = "bus", "mod";
+ resets = <&ccu 4>;
+ phys = <&dphy0>;
+ phy-names = "dphy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
+ reg = <0>;
+ power-gpios = <&pio 1 7 0>; /* PB07 */
+ reset-gpios = <&r_pio 0 5 1>; /* PL05 */
+ backlight = <&pwm_bl>;
+ };
+
+ port {
+ dsi0_in_tcon0: endpoint {
+ remote-endpoint = <&tcon0_out_dsi0>;
+ };
+ };
+ };
+
+...
deleted file mode 100644
@@ -1,93 +0,0 @@
-Allwinner A31 DSI Encoder
-=========================
-
-The DSI pipeline consists of two separate blocks: the DSI controller
-itself, and its associated D-PHY.
-
-DSI Encoder
------------
-
-The DSI Encoder generates the DSI signal from the TCON's.
-
-Required properties:
- - compatible: value must be one of:
- * allwinner,sun6i-a31-mipi-dsi
- - reg: base address and size of memory-mapped region
- - interrupts: interrupt associated to this IP
- - clocks: phandles to the clocks feeding the DSI encoder
- * bus: the DSI interface clock
- * mod: the DSI module clock
- - clock-names: the clock names mentioned above
- - phys: phandle to the D-PHY
- - phy-names: must be "dphy"
- - resets: phandle to the reset controller driving the encoder
-
- - ports: A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- first port should be the input endpoint, usually coming from the
- associated TCON.
-
-Any MIPI-DSI device attached to this should be described according to
-the bindings defined in ../mipi-dsi-bus.txt
-
-D-PHY
------
-
-Required properties:
- - compatible: value must be one of:
- * allwinner,sun6i-a31-mipi-dphy
- - reg: base address and size of memory-mapped region
- - clocks: phandles to the clocks feeding the DSI encoder
- * bus: the DSI interface clock
- * mod: the DSI module clock
- - clock-names: the clock names mentioned above
- - resets: phandle to the reset controller driving the encoder
-
-Example:
-
-dsi0: dsi@1ca0000 {
- compatible = "allwinner,sun6i-a31-mipi-dsi";
- reg = <0x01ca0000 0x1000>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_MIPI_DSI>,
- <&ccu CLK_DSI_SCLK>;
- clock-names = "bus", "mod";
- resets = <&ccu RST_BUS_MIPI_DSI>;
- phys = <&dphy0>;
- phy-names = "dphy";
- #address-cells = <1>;
- #size-cells = <0>;
-
- panel@0 {
- compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
- reg = <0>;
- power-gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* PB07 */
- reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
- backlight = <&pwm_bl>;
- };
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- dsi0_in_tcon0: endpoint {
- remote-endpoint = <&tcon0_out_dsi0>;
- };
- };
- };
-};
-
-dphy0: d-phy@1ca1000 {
- compatible = "allwinner,sun6i-a31-mipi-dphy";
- reg = <0x01ca1000 0x1000>;
- clocks = <&ccu CLK_BUS_MIPI_DSI>,
- <&ccu CLK_DSI_DPHY>;
- clock-names = "bus", "mod";
- resets = <&ccu RST_BUS_MIPI_DSI>;
- #phy-cells = <0>;
-};
new file mode 100644
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI D-PHY Controller Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ "#phy-cells":
+ const: 0
+
+ compatible:
+ const: allwinner,sun6i-a31-mipi-dphy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: mod
+
+ resets:
+ maxItems: 1
+
+required:
+ - "#phy-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ dphy0: d-phy@1ca1000 {
+ compatible = "allwinner,sun6i-a31-mipi-dphy";
+ reg = <0x01ca1000 0x1000>;
+ clocks = <&ccu 23>, <&ccu 97>;
+ clock-names = "bus", "mod";
+ resets = <&ccu 4>;
+ #phy-cells = <0>;
+ };
+
+...
The Allwinner SoCs have a MIPI-DSI and MIPI-D-PHY controllers supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 100 ++++++++++++++++++ .../bindings/display/sunxi/sun6i-dsi.txt | 93 ---------------- .../phy/allwinner,sun6i-a31-mipi-dphy.yaml | 57 ++++++++++ 3 files changed, 157 insertions(+), 93 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml delete mode 100644 Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt create mode 100644 Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml