| Message ID | 20190529221222.19276-1-olteanv@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] ARM: dts: Introduce the NXP LS1021A-TSN board | expand |
On Thu, May 30, 2019 at 01:12:22AM +0300, Vladimir Oltean wrote: > The LS1021A-TSN is a development board built by VVDN/Argonboards in > partnership with NXP. > > It features the LS1021A SoC and the first-generation SJA1105T Ethernet > switch for prototyping implementations of a subset of IEEE 802.1 TSN > standards. > > It has two regular Ethernet ports and four switched, TSN-capable ports. > > It also features: > - One Arduino header > - One expansion header > - Two USB 3.0 ports > - One mini PCIe slot > - One SATA interface > - Accelerometer, gyroscope, temperature sensors > > Signed-off-by: Vladimir Oltean <olteanv@gmail.com> > --- > Changes from v1: > - Applied Shawn's feedback > - Introduced QSPI flash node > > v1 patch available at: > https://patchwork.kernel.org/patch/10930451/ > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/ls1021a-tsn.dts | 288 ++++++++++++++++++++++++++++++ > 2 files changed, 289 insertions(+) > create mode 100644 arch/arm/boot/dts/ls1021a-tsn.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index dab2914fa293..a4eb4ca5e148 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -602,6 +602,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \ > dtb-$(CONFIG_SOC_LS1021A) += \ > ls1021a-moxa-uc-8410a.dtb \ > ls1021a-qds.dtb \ > + ls1021a-tsn.dtb \ > ls1021a-twr.dtb > dtb-$(CONFIG_SOC_VF610) += \ > vf500-colibri-eval-v3.dtb \ > diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts > new file mode 100644 > index 000000000000..b05774eac92e > --- /dev/null > +++ b/arch/arm/boot/dts/ls1021a-tsn.dts > @@ -0,0 +1,288 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Copyright 2016-2018 NXP Semiconductors > + * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> > + */ > + > +/dts-v1/; > +#include "ls1021a.dtsi" > + > +/ { > + model = "NXP LS1021A-TSN Board"; > + > + sys_mclk: clock-mclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24576000>; > + }; > + > + reg_vdda_codec: regulator-3V3 { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_vddio_codec: regulator-2V5 { > + compatible = "regulator-fixed"; > + regulator-name = "2P5V"; > + regulator-min-microvolt = <2500000>; > + regulator-max-microvolt = <2500000>; > + regulator-always-on; > + }; > +}; > + > +&enet0 { > + tbi-handle = <&tbi0>; > + phy-handle = <&sgmii_phy2>; > + phy-mode = "sgmii"; > + status = "okay"; > +}; > + > +&enet1 { > + tbi-handle = <&tbi1>; > + phy-handle = <&sgmii_phy1>; > + phy-mode = "sgmii"; > + status = "okay"; > +}; > + > +/* RGMII delays added via PCB traces */ > +&enet2 { > + phy-mode = "rgmii"; > + status = "okay"; > + > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > +}; > + > +&dspi0 { > + bus-num = <0>; > + status = "okay"; > + > + /* ADG704BRMZ 1:4 mux/demux */ > + sja1105: ethernet-switch@1 { > + reg = <0x1>; > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "nxp,sja1105t"; > + /* 12 MHz */ > + spi-max-frequency = <12000000>; > + /* Sample data on trailing clock edge */ > + spi-cpha; > + fsl,spi-cs-sck-delay = <1000>; > + fsl,spi-sck-cs-delay = <1000>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + /* ETH5 written on chassis */ > + label = "swp5"; > + phy-handle = <&rgmii_phy6>; > + phy-mode = "rgmii-id"; > + reg = <0>; > + }; > + > + port@1 { > + /* ETH2 written on chassis */ > + label = "swp2"; > + phy-handle = <&rgmii_phy3>; > + phy-mode = "rgmii-id"; > + reg = <1>; > + }; > + > + port@2 { > + /* ETH3 written on chassis */ > + label = "swp3"; > + phy-handle = <&rgmii_phy4>; > + phy-mode = "rgmii-id"; > + reg = <2>; > + }; > + > + port@3 { > + /* ETH4 written on chassis */ > + label = "swp4"; > + phy-handle = <&rgmii_phy5>; > + phy-mode = "rgmii-id"; > + reg = <3>; > + }; > + > + port@4 { > + /* Internal port connected to eth2 */ > + ethernet = <&enet2>; > + phy-mode = "rgmii"; > + reg = <4>; > + > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + }; > + }; > +}; > + > +&mdio0 { > + /* AR8031 */ > + sgmii_phy1: ethernet-phy@1 { > + reg = <0x1>; > + }; > + > + /* AR8031 */ > + sgmii_phy2: ethernet-phy@2 { > + reg = <0x2>; > + }; > + > + /* BCM5464 quad PHY */ > + rgmii_phy3: ethernet-phy@3 { > + reg = <0x3>; > + }; > + > + rgmii_phy4: ethernet-phy@4 { > + reg = <0x4>; > + }; > + > + rgmii_phy5: ethernet-phy@5 { > + reg = <0x5>; > + }; > + > + rgmii_phy6: ethernet-phy@6 { > + reg = <0x6>; > + }; > + > + /* SGMII PCS for enet0 */ > + tbi0: tbi-phy@1f { > + reg = <0x1f>; > + device_type = "tbi-phy"; > + }; > +}; > + > +&mdio1 { > + /* SGMII PCS for enet1 */ > + tbi1: tbi-phy@1f { > + reg = <0x1f>; > + device_type = "tbi-phy"; > + }; > +}; > + > +&i2c0 { > + status = "okay"; > + > + /* 3 axis accelerometer */ > + accelerometer@1e { > + compatible = "fsl,fxls8471"; > + position = <0>; > + reg = <0x1e>; > + }; > + > + /* Audio codec (SAI2) */ > + codec@2a { audio-codec for node name. > + compatible = "fsl,sgtl5000"; > + VDDIO-supply = <®_vddio_codec>; > + VDDA-supply = <®_vdda_codec>; > + #sound-dai-cells = <0>; > + clocks = <&sys_mclk>; > + reg = <0x2a>; > + }; > + > + /* Current sensing circuit for 1V VDDCORE PMIC rail */ > + current-sensor@44 { > + compatible = "ti,ina220"; > + shunt-resistor = <1000>; > + reg = <0x44>; > + }; > + > + /* Current sensing circuit for 12V VCC rail */ > + current-sensor@45 { > + compatible = "ti,ina220"; > + shunt-resistor = <1000>; > + reg = <0x45>; > + }; > + > + /* Thermal monitor - case */ > + temperature-sensor@48 { > + compatible = "national,lm75"; > + reg = <0x48>; > + }; > + > + /* Thermal monitor - chip */ > + temperature-sensor@4c { > + compatible = "ti,tmp451"; > + reg = <0x4c>; > + }; > + > + eeprom@51 { > + compatible = "atmel,24c32"; > + reg = <0x51>; > + }; > + > + /* Unsupported devices: > + * - FXAS21002C Gyroscope at 0x20 > + * - TI ADS7924 4-channel ADC at 0x49 > + */ > +}; > + > +&qspi { > + status = "okay"; > + > + flash@0 { > + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ > + compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; > + spi-max-frequency = <20000000>; > + #address-cells = <1>; > + #size-cells = <1>; > + reg = <0>; > + > + partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "RCW"; > + reg = <0x0 0x40000>; > + }; > + > + partition@40000 { > + label = "U-Boot"; > + reg = <0x40000 0x300000>; > + }; > + > + partition@340000 { > + label = "U-Boot Env"; > + reg = <0x340000 0x100000>; > + }; > + }; > + }; > +}; > + > +&ifc { Please sort all these labelling nodes alphabetically. Shawn > + status = "disabled"; > +}; > + > +&esdhc { > + status = "okay"; > +}; > + > +&uart0 { > + status = "okay"; > +}; > + > +&lpuart0 { > + status = "okay"; > +}; > + > +&lpuart3 { > + status = "okay"; > +}; > + > +&sai2 { > + status = "okay"; > +}; > + > +&sata { > + status = "okay"; > +}; > -- > 2.17.1 >
On Thu, 6 Jun 2019 at 04:04, Shawn Guo <shawnguo@kernel.org> wrote: > > On Thu, May 30, 2019 at 01:12:22AM +0300, Vladimir Oltean wrote: > > The LS1021A-TSN is a development board built by VVDN/Argonboards in > > partnership with NXP. > > > > It features the LS1021A SoC and the first-generation SJA1105T Ethernet > > switch for prototyping implementations of a subset of IEEE 802.1 TSN > > standards. > > > > It has two regular Ethernet ports and four switched, TSN-capable ports. > > > > It also features: > > - One Arduino header > > - One expansion header > > - Two USB 3.0 ports > > - One mini PCIe slot > > - One SATA interface > > - Accelerometer, gyroscope, temperature sensors > > > > Signed-off-by: Vladimir Oltean <olteanv@gmail.com> > > --- > > Changes from v1: > > - Applied Shawn's feedback > > - Introduced QSPI flash node > > > > v1 patch available at: > > https://patchwork.kernel.org/patch/10930451/ > > > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/ls1021a-tsn.dts | 288 ++++++++++++++++++++++++++++++ > > 2 files changed, 289 insertions(+) > > create mode 100644 arch/arm/boot/dts/ls1021a-tsn.dts > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index dab2914fa293..a4eb4ca5e148 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -602,6 +602,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \ > > dtb-$(CONFIG_SOC_LS1021A) += \ > > ls1021a-moxa-uc-8410a.dtb \ > > ls1021a-qds.dtb \ > > + ls1021a-tsn.dtb \ > > ls1021a-twr.dtb > > dtb-$(CONFIG_SOC_VF610) += \ > > vf500-colibri-eval-v3.dtb \ > > diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts > > new file mode 100644 > > index 000000000000..b05774eac92e > > --- /dev/null > > +++ b/arch/arm/boot/dts/ls1021a-tsn.dts > > @@ -0,0 +1,288 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* Copyright 2016-2018 NXP Semiconductors > > + * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> > > + */ > > + > > +/dts-v1/; > > +#include "ls1021a.dtsi" > > + > > +/ { > > + model = "NXP LS1021A-TSN Board"; > > + > > + sys_mclk: clock-mclk { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <24576000>; > > + }; > > + > > + reg_vdda_codec: regulator-3V3 { > > + compatible = "regulator-fixed"; > > + regulator-name = "3P3V"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + }; > > + > > + reg_vddio_codec: regulator-2V5 { > > + compatible = "regulator-fixed"; > > + regulator-name = "2P5V"; > > + regulator-min-microvolt = <2500000>; > > + regulator-max-microvolt = <2500000>; > > + regulator-always-on; > > + }; > > +}; > > + > > +&enet0 { > > + tbi-handle = <&tbi0>; > > + phy-handle = <&sgmii_phy2>; > > + phy-mode = "sgmii"; > > + status = "okay"; > > +}; > > + > > +&enet1 { > > + tbi-handle = <&tbi1>; > > + phy-handle = <&sgmii_phy1>; > > + phy-mode = "sgmii"; > > + status = "okay"; > > +}; > > + > > +/* RGMII delays added via PCB traces */ > > +&enet2 { > > + phy-mode = "rgmii"; > > + status = "okay"; > > + > > + fixed-link { > > + speed = <1000>; > > + full-duplex; > > + }; > > +}; > > + > > +&dspi0 { > > + bus-num = <0>; > > + status = "okay"; > > + > > + /* ADG704BRMZ 1:4 mux/demux */ > > + sja1105: ethernet-switch@1 { > > + reg = <0x1>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + compatible = "nxp,sja1105t"; > > + /* 12 MHz */ > > + spi-max-frequency = <12000000>; > > + /* Sample data on trailing clock edge */ > > + spi-cpha; > > + fsl,spi-cs-sck-delay = <1000>; > > + fsl,spi-sck-cs-delay = <1000>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + /* ETH5 written on chassis */ > > + label = "swp5"; > > + phy-handle = <&rgmii_phy6>; > > + phy-mode = "rgmii-id"; > > + reg = <0>; > > + }; > > + > > + port@1 { > > + /* ETH2 written on chassis */ > > + label = "swp2"; > > + phy-handle = <&rgmii_phy3>; > > + phy-mode = "rgmii-id"; > > + reg = <1>; > > + }; > > + > > + port@2 { > > + /* ETH3 written on chassis */ > > + label = "swp3"; > > + phy-handle = <&rgmii_phy4>; > > + phy-mode = "rgmii-id"; > > + reg = <2>; > > + }; > > + > > + port@3 { > > + /* ETH4 written on chassis */ > > + label = "swp4"; > > + phy-handle = <&rgmii_phy5>; > > + phy-mode = "rgmii-id"; > > + reg = <3>; > > + }; > > + > > + port@4 { > > + /* Internal port connected to eth2 */ > > + ethernet = <&enet2>; > > + phy-mode = "rgmii"; > > + reg = <4>; > > + > > + fixed-link { > > + speed = <1000>; > > + full-duplex; > > + }; > > + }; > > + }; > > + }; > > +}; > > + > > +&mdio0 { > > + /* AR8031 */ > > + sgmii_phy1: ethernet-phy@1 { > > + reg = <0x1>; > > + }; > > + > > + /* AR8031 */ > > + sgmii_phy2: ethernet-phy@2 { > > + reg = <0x2>; > > + }; > > + > > + /* BCM5464 quad PHY */ > > + rgmii_phy3: ethernet-phy@3 { > > + reg = <0x3>; > > + }; > > + > > + rgmii_phy4: ethernet-phy@4 { > > + reg = <0x4>; > > + }; > > + > > + rgmii_phy5: ethernet-phy@5 { > > + reg = <0x5>; > > + }; > > + > > + rgmii_phy6: ethernet-phy@6 { > > + reg = <0x6>; > > + }; > > + > > + /* SGMII PCS for enet0 */ > > + tbi0: tbi-phy@1f { > > + reg = <0x1f>; > > + device_type = "tbi-phy"; > > + }; > > +}; > > + > > +&mdio1 { > > + /* SGMII PCS for enet1 */ > > + tbi1: tbi-phy@1f { > > + reg = <0x1f>; > > + device_type = "tbi-phy"; > > + }; > > +}; > > + > > +&i2c0 { > > + status = "okay"; > > + > > + /* 3 axis accelerometer */ > > + accelerometer@1e { > > + compatible = "fsl,fxls8471"; > > + position = <0>; > > + reg = <0x1e>; > > + }; > > + > > + /* Audio codec (SAI2) */ > > + codec@2a { > > audio-codec for node name. > > > + compatible = "fsl,sgtl5000"; > > + VDDIO-supply = <®_vddio_codec>; > > + VDDA-supply = <®_vdda_codec>; > > + #sound-dai-cells = <0>; > > + clocks = <&sys_mclk>; > > + reg = <0x2a>; > > + }; > > + > > + /* Current sensing circuit for 1V VDDCORE PMIC rail */ > > + current-sensor@44 { > > + compatible = "ti,ina220"; > > + shunt-resistor = <1000>; > > + reg = <0x44>; > > + }; > > + > > + /* Current sensing circuit for 12V VCC rail */ > > + current-sensor@45 { > > + compatible = "ti,ina220"; > > + shunt-resistor = <1000>; > > + reg = <0x45>; > > + }; > > + > > + /* Thermal monitor - case */ > > + temperature-sensor@48 { > > + compatible = "national,lm75"; > > + reg = <0x48>; > > + }; > > + > > + /* Thermal monitor - chip */ > > + temperature-sensor@4c { > > + compatible = "ti,tmp451"; > > + reg = <0x4c>; > > + }; > > + > > + eeprom@51 { > > + compatible = "atmel,24c32"; > > + reg = <0x51>; > > + }; > > + > > + /* Unsupported devices: > > + * - FXAS21002C Gyroscope at 0x20 > > + * - TI ADS7924 4-channel ADC at 0x49 > > + */ > > +}; > > + > > +&qspi { > > + status = "okay"; > > + > > + flash@0 { > > + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ > > + compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; > > + spi-max-frequency = <20000000>; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + reg = <0>; > > + > > + partitions { > > + compatible = "fixed-partitions"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + > > + partition@0 { > > + label = "RCW"; > > + reg = <0x0 0x40000>; > > + }; > > + > > + partition@40000 { > > + label = "U-Boot"; > > + reg = <0x40000 0x300000>; > > + }; > > + > > + partition@340000 { > > + label = "U-Boot Env"; > > + reg = <0x340000 0x100000>; > > + }; > > + }; > > + }; > > +}; > > + > > +&ifc { > > Please sort all these labelling nodes alphabetically. > Hi Shawn, It's not entirely clear to me which nodes you mean. Regards, -Vladimir > Shawn > > > + status = "disabled"; > > +}; > > + > > +&esdhc { > > + status = "okay"; > > +}; > > + > > +&uart0 { > > + status = "okay"; > > +}; > > + > > +&lpuart0 { > > + status = "okay"; > > +}; > > + > > +&lpuart3 { > > + status = "okay"; > > +}; > > + > > +&sai2 { > > + status = "okay"; > > +}; > > + > > +&sata { > > + status = "okay"; > > +}; > > -- > > 2.17.1 > >
On Thu, Jun 06, 2019 at 04:15:00AM +0300, Vladimir Oltean wrote: > On Thu, 6 Jun 2019 at 04:04, Shawn Guo <shawnguo@kernel.org> wrote: > > > > On Thu, May 30, 2019 at 01:12:22AM +0300, Vladimir Oltean wrote: > > > The LS1021A-TSN is a development board built by VVDN/Argonboards in > > > partnership with NXP. > > > > > > It features the LS1021A SoC and the first-generation SJA1105T Ethernet > > > switch for prototyping implementations of a subset of IEEE 802.1 TSN > > > standards. > > > > > > It has two regular Ethernet ports and four switched, TSN-capable ports. > > > > > > It also features: > > > - One Arduino header > > > - One expansion header > > > - Two USB 3.0 ports > > > - One mini PCIe slot > > > - One SATA interface > > > - Accelerometer, gyroscope, temperature sensors > > > > > > Signed-off-by: Vladimir Oltean <olteanv@gmail.com> > > > --- > > > Changes from v1: > > > - Applied Shawn's feedback > > > - Introduced QSPI flash node > > > > > > v1 patch available at: > > > https://patchwork.kernel.org/patch/10930451/ > > > > > > arch/arm/boot/dts/Makefile | 1 + > > > arch/arm/boot/dts/ls1021a-tsn.dts | 288 ++++++++++++++++++++++++++++++ > > > 2 files changed, 289 insertions(+) > > > create mode 100644 arch/arm/boot/dts/ls1021a-tsn.dts > > > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > > index dab2914fa293..a4eb4ca5e148 100644 > > > --- a/arch/arm/boot/dts/Makefile > > > +++ b/arch/arm/boot/dts/Makefile > > > @@ -602,6 +602,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \ > > > dtb-$(CONFIG_SOC_LS1021A) += \ > > > ls1021a-moxa-uc-8410a.dtb \ > > > ls1021a-qds.dtb \ > > > + ls1021a-tsn.dtb \ > > > ls1021a-twr.dtb > > > dtb-$(CONFIG_SOC_VF610) += \ > > > vf500-colibri-eval-v3.dtb \ > > > diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts > > > new file mode 100644 > > > index 000000000000..b05774eac92e > > > --- /dev/null > > > +++ b/arch/arm/boot/dts/ls1021a-tsn.dts > > > @@ -0,0 +1,288 @@ > > > +// SPDX-License-Identifier: GPL-2.0 > > > +/* Copyright 2016-2018 NXP Semiconductors > > > + * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> > > > + */ > > > + > > > +/dts-v1/; > > > +#include "ls1021a.dtsi" > > > + > > > +/ { > > > + model = "NXP LS1021A-TSN Board"; > > > + > > > + sys_mclk: clock-mclk { > > > + compatible = "fixed-clock"; > > > + #clock-cells = <0>; > > > + clock-frequency = <24576000>; > > > + }; > > > + > > > + reg_vdda_codec: regulator-3V3 { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "3P3V"; > > > + regulator-min-microvolt = <3300000>; > > > + regulator-max-microvolt = <3300000>; > > > + regulator-always-on; > > > + }; > > > + > > > + reg_vddio_codec: regulator-2V5 { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "2P5V"; > > > + regulator-min-microvolt = <2500000>; > > > + regulator-max-microvolt = <2500000>; > > > + regulator-always-on; > > > + }; > > > +}; > > > + > > > +&enet0 { > > > + tbi-handle = <&tbi0>; > > > + phy-handle = <&sgmii_phy2>; > > > + phy-mode = "sgmii"; > > > + status = "okay"; > > > +}; > > > + > > > +&enet1 { > > > + tbi-handle = <&tbi1>; > > > + phy-handle = <&sgmii_phy1>; > > > + phy-mode = "sgmii"; > > > + status = "okay"; > > > +}; > > > + > > > +/* RGMII delays added via PCB traces */ > > > +&enet2 { > > > + phy-mode = "rgmii"; > > > + status = "okay"; > > > + > > > + fixed-link { > > > + speed = <1000>; > > > + full-duplex; > > > + }; > > > +}; > > > + > > > +&dspi0 { > > > + bus-num = <0>; > > > + status = "okay"; > > > + > > > + /* ADG704BRMZ 1:4 mux/demux */ > > > + sja1105: ethernet-switch@1 { > > > + reg = <0x1>; > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + compatible = "nxp,sja1105t"; > > > + /* 12 MHz */ > > > + spi-max-frequency = <12000000>; > > > + /* Sample data on trailing clock edge */ > > > + spi-cpha; > > > + fsl,spi-cs-sck-delay = <1000>; > > > + fsl,spi-sck-cs-delay = <1000>; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@0 { > > > + /* ETH5 written on chassis */ > > > + label = "swp5"; > > > + phy-handle = <&rgmii_phy6>; > > > + phy-mode = "rgmii-id"; > > > + reg = <0>; > > > + }; > > > + > > > + port@1 { > > > + /* ETH2 written on chassis */ > > > + label = "swp2"; > > > + phy-handle = <&rgmii_phy3>; > > > + phy-mode = "rgmii-id"; > > > + reg = <1>; > > > + }; > > > + > > > + port@2 { > > > + /* ETH3 written on chassis */ > > > + label = "swp3"; > > > + phy-handle = <&rgmii_phy4>; > > > + phy-mode = "rgmii-id"; > > > + reg = <2>; > > > + }; > > > + > > > + port@3 { > > > + /* ETH4 written on chassis */ > > > + label = "swp4"; > > > + phy-handle = <&rgmii_phy5>; > > > + phy-mode = "rgmii-id"; > > > + reg = <3>; > > > + }; > > > + > > > + port@4 { > > > + /* Internal port connected to eth2 */ > > > + ethernet = <&enet2>; > > > + phy-mode = "rgmii"; > > > + reg = <4>; > > > + > > > + fixed-link { > > > + speed = <1000>; > > > + full-duplex; > > > + }; > > > + }; > > > + }; > > > + }; > > > +}; > > > + > > > +&mdio0 { > > > + /* AR8031 */ > > > + sgmii_phy1: ethernet-phy@1 { > > > + reg = <0x1>; > > > + }; > > > + > > > + /* AR8031 */ > > > + sgmii_phy2: ethernet-phy@2 { > > > + reg = <0x2>; > > > + }; > > > + > > > + /* BCM5464 quad PHY */ > > > + rgmii_phy3: ethernet-phy@3 { > > > + reg = <0x3>; > > > + }; > > > + > > > + rgmii_phy4: ethernet-phy@4 { > > > + reg = <0x4>; > > > + }; > > > + > > > + rgmii_phy5: ethernet-phy@5 { > > > + reg = <0x5>; > > > + }; > > > + > > > + rgmii_phy6: ethernet-phy@6 { > > > + reg = <0x6>; > > > + }; > > > + > > > + /* SGMII PCS for enet0 */ > > > + tbi0: tbi-phy@1f { > > > + reg = <0x1f>; > > > + device_type = "tbi-phy"; > > > + }; > > > +}; > > > + > > > +&mdio1 { > > > + /* SGMII PCS for enet1 */ > > > + tbi1: tbi-phy@1f { > > > + reg = <0x1f>; > > > + device_type = "tbi-phy"; > > > + }; > > > +}; > > > + > > > +&i2c0 { > > > + status = "okay"; > > > + > > > + /* 3 axis accelerometer */ > > > + accelerometer@1e { > > > + compatible = "fsl,fxls8471"; > > > + position = <0>; > > > + reg = <0x1e>; > > > + }; > > > + > > > + /* Audio codec (SAI2) */ > > > + codec@2a { > > > > audio-codec for node name. > > > > > + compatible = "fsl,sgtl5000"; > > > + VDDIO-supply = <®_vddio_codec>; > > > + VDDA-supply = <®_vdda_codec>; > > > + #sound-dai-cells = <0>; > > > + clocks = <&sys_mclk>; > > > + reg = <0x2a>; > > > + }; > > > + > > > + /* Current sensing circuit for 1V VDDCORE PMIC rail */ > > > + current-sensor@44 { > > > + compatible = "ti,ina220"; > > > + shunt-resistor = <1000>; > > > + reg = <0x44>; > > > + }; > > > + > > > + /* Current sensing circuit for 12V VCC rail */ > > > + current-sensor@45 { > > > + compatible = "ti,ina220"; > > > + shunt-resistor = <1000>; > > > + reg = <0x45>; > > > + }; > > > + > > > + /* Thermal monitor - case */ > > > + temperature-sensor@48 { > > > + compatible = "national,lm75"; > > > + reg = <0x48>; > > > + }; > > > + > > > + /* Thermal monitor - chip */ > > > + temperature-sensor@4c { > > > + compatible = "ti,tmp451"; > > > + reg = <0x4c>; > > > + }; > > > + > > > + eeprom@51 { > > > + compatible = "atmel,24c32"; > > > + reg = <0x51>; > > > + }; > > > + > > > + /* Unsupported devices: > > > + * - FXAS21002C Gyroscope at 0x20 > > > + * - TI ADS7924 4-channel ADC at 0x49 > > > + */ > > > +}; > > > + > > > +&qspi { > > > + status = "okay"; > > > + > > > + flash@0 { > > > + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ > > > + compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; > > > + spi-max-frequency = <20000000>; > > > + #address-cells = <1>; > > > + #size-cells = <1>; > > > + reg = <0>; > > > + > > > + partitions { > > > + compatible = "fixed-partitions"; > > > + #address-cells = <1>; > > > + #size-cells = <1>; > > > + > > > + partition@0 { > > > + label = "RCW"; > > > + reg = <0x0 0x40000>; > > > + }; > > > + > > > + partition@40000 { > > > + label = "U-Boot"; > > > + reg = <0x40000 0x300000>; > > > + }; > > > + > > > + partition@340000 { > > > + label = "U-Boot Env"; > > > + reg = <0x340000 0x100000>; > > > + }; > > > + }; > > > + }; > > > +}; > > > + > > > +&ifc { > > > > Please sort all these labelling nodes alphabetically. > > > > Hi Shawn, > > It's not entirely clear to me which nodes you mean. I should have put this comment at a better place, i.e. &dspi0 which breaks the order in the first place. &dspi0 { ... }; &enet0 { ... }; &enet1 { ... }; &enet2 { ... }; &esdhc { ... }; ... Shawn > > > > > + status = "disabled"; > > > +}; > > > + > > > +&esdhc { > > > + status = "okay"; > > > +}; > > > + > > > +&uart0 { > > > + status = "okay"; > > > +}; > > > + > > > +&lpuart0 { > > > + status = "okay"; > > > +}; > > > + > > > +&lpuart3 { > > > + status = "okay"; > > > +}; > > > + > > > +&sai2 { > > > + status = "okay"; > > > +}; > > > + > > > +&sata { > > > + status = "okay"; > > > +}; > > > -- > > > 2.17.1 > > >
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index dab2914fa293..a4eb4ca5e148 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -602,6 +602,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \ dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-moxa-uc-8410a.dtb \ ls1021a-qds.dtb \ + ls1021a-tsn.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts new file mode 100644 index 000000000000..b05774eac92e --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-tsn.dts @@ -0,0 +1,288 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2016-2018 NXP Semiconductors + * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "NXP LS1021A-TSN Board"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_vdda_codec: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_codec: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; +}; + +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy2>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +/* RGMII delays added via PCB traces */ +&enet2 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + /* ADG704BRMZ 1:4 mux/demux */ + sja1105: ethernet-switch@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,sja1105t"; + /* 12 MHz */ + spi-max-frequency = <12000000>; + /* Sample data on trailing clock edge */ + spi-cpha; + fsl,spi-cs-sck-delay = <1000>; + fsl,spi-sck-cs-delay = <1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* ETH5 written on chassis */ + label = "swp5"; + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + }; + + port@1 { + /* ETH2 written on chassis */ + label = "swp2"; + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + }; + + port@2 { + /* ETH3 written on chassis */ + label = "swp3"; + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + }; + + port@3 { + /* ETH4 written on chassis */ + label = "swp4"; + phy-handle = <&rgmii_phy5>; + phy-mode = "rgmii-id"; + reg = <3>; + }; + + port@4 { + /* Internal port connected to eth2 */ + ethernet = <&enet2>; + phy-mode = "rgmii"; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&mdio0 { + /* AR8031 */ + sgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + /* AR8031 */ + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + /* BCM5464 quad PHY */ + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + rgmii_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + rgmii_phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + rgmii_phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + /* SGMII PCS for enet0 */ + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + /* SGMII PCS for enet1 */ + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&i2c0 { + status = "okay"; + + /* 3 axis accelerometer */ + accelerometer@1e { + compatible = "fsl,fxls8471"; + position = <0>; + reg = <0x1e>; + }; + + /* Audio codec (SAI2) */ + codec@2a { + compatible = "fsl,sgtl5000"; + VDDIO-supply = <®_vddio_codec>; + VDDA-supply = <®_vdda_codec>; + #sound-dai-cells = <0>; + clocks = <&sys_mclk>; + reg = <0x2a>; + }; + + /* Current sensing circuit for 1V VDDCORE PMIC rail */ + current-sensor@44 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x44>; + }; + + /* Current sensing circuit for 12V VCC rail */ + current-sensor@45 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x45>; + }; + + /* Thermal monitor - case */ + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + /* Thermal monitor - chip */ + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + }; + + /* Unsupported devices: + * - FXAS21002C Gyroscope at 0x20 + * - TI ADS7924 4-channel ADC at 0x49 + */ +}; + +&qspi { + status = "okay"; + + flash@0 { + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ + compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RCW"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "U-Boot"; + reg = <0x40000 0x300000>; + }; + + partition@340000 { + label = "U-Boot Env"; + reg = <0x340000 0x100000>; + }; + }; + }; +}; + +&ifc { + status = "disabled"; +}; + +&esdhc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&lpuart0 { + status = "okay"; +}; + +&lpuart3 { + status = "okay"; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +};
The LS1021A-TSN is a development board built by VVDN/Argonboards in partnership with NXP. It features the LS1021A SoC and the first-generation SJA1105T Ethernet switch for prototyping implementations of a subset of IEEE 802.1 TSN standards. It has two regular Ethernet ports and four switched, TSN-capable ports. It also features: - One Arduino header - One expansion header - Two USB 3.0 ports - One mini PCIe slot - One SATA interface - Accelerometer, gyroscope, temperature sensors Signed-off-by: Vladimir Oltean <olteanv@gmail.com> --- Changes from v1: - Applied Shawn's feedback - Introduced QSPI flash node v1 patch available at: https://patchwork.kernel.org/patch/10930451/ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/ls1021a-tsn.dts | 288 ++++++++++++++++++++++++++++++ 2 files changed, 289 insertions(+) create mode 100644 arch/arm/boot/dts/ls1021a-tsn.dts