| Message ID | 2426649b2d8224ae72e7706bcb8c4f2c44c581d2.1558746978.git.renatogeh@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: iio: adc: add ad7780 yaml and MAINTAINERS entry | expand |
On Fri, 24 May 2019 22:26:30 -0300 Renato Lui Geh <renatogeh@gmail.com> wrote: > This patch adds a YAML binding for the Analog Devices AD7780/1 and > AD7170/1 analog-to-digital converters. > > Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Looks good to me, but I'm still finding my feet with these so will leave it for a few days for others to have time to comment. Michael, looking for a quick reply from you to say if you are happy being explicitly listed as maintainer for this one, or if you'd rather land it on someone else. Same applies for patch 2. Renato, if I seem to have forgotten this in a week or so, feel free to give me a poke. I've been known to loose patches entirely! Thanks, Jonathan > --- > Changes in v2: > - vref-supply to avdd-supply > - remove avdd-supply from required list > - include adc block in an spi block > > .../bindings/iio/adc/adi,ad7780.txt | 48 ---------- > .../bindings/iio/adc/adi,ad7780.yaml | 87 +++++++++++++++++++ > 2 files changed, 87 insertions(+), 48 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > deleted file mode 100644 > index 440e52555349..000000000000 > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > +++ /dev/null > @@ -1,48 +0,0 @@ > -* Analog Devices AD7170/AD7171/AD7780/AD7781 > - > -Data sheets: > - > -- AD7170: > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > -- AD7171: > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > -- AD7780: > - * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > -- AD7781: > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > - > -Required properties: > - > -- compatible: should be one of > - * "adi,ad7170" > - * "adi,ad7171" > - * "adi,ad7780" > - * "adi,ad7781" > -- reg: spi chip select number for the device > -- vref-supply: the regulator supply for the ADC reference voltage > - > -Optional properties: > - > -- powerdown-gpios: must be the device tree identifier of the PDRST pin. If > - specified, it will be asserted during driver probe. As the > - line is active high, it should be marked GPIO_ACTIVE_HIGH. > -- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for > - the ad778x chips. If specified, it will be asserted during > - driver probe. As the line is active low, it should be marked > - GPIO_ACTIVE_LOW. > -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only > - for the ad778x chips. If specified, it will be asserted > - during driver probe. As the line is active low, it should be > - marked GPIO_ACTIVE_LOW. > - > -Example: > - > -adc@0 { > - compatible = "adi,ad7780"; > - reg = <0>; > - vref-supply = <&vdd_supply> > - > - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; > - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; > - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; > -}; > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > new file mode 100644 > index 000000000000..d1109416963c > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > @@ -0,0 +1,87 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters > + > +maintainers: > + - Michael Hennerich <michael.hennerich@analog.com> > + > +description: | > + The ad7780 is a sigma-delta analog to digital converter. This driver provides > + reading voltage values and status bits from both the ad778x and ad717x series. > + Its interface also allows writing on the FILTER and GAIN GPIO pins on the > + ad778x. > + > + Specifications on the converters can be found at: > + AD7170: > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > + AD7171: > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > + AD7780: > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > + AD7781: > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > + > +properties: > + compatible: > + enum: > + - adi,ad7170 > + - adi,ad7171 > + - adi,ad7780 > + - adi,ad7781 > + > + reg: > + maxItems: 1 > + > + avdd-supply: > + description: > + The regulator supply for the ADC reference voltage. > + maxItems: 1 > + > + powerdown-gpios: > + description: > + Must be the device tree identifier of the PDRST pin. If > + specified, it will be asserted during driver probe. As the > + line is active high, it should be marked GPIO_ACTIVE_HIGH. > + maxItems: 1 > + > + adi,gain-gpios: > + description: > + Must be the device tree identifier of the GAIN pin. Only for > + the ad778x chips. If specified, it will be asserted during > + driver probe. As the line is active low, it should be marked > + GPIO_ACTIVE_LOW. > + maxItems: 1 > + > + adi,filter-gpios: > + description: > + Must be the device tree identifier of the FILTER pin. Only > + for the ad778x chips. If specified, it will be asserted > + during driver probe. As the line is active low, it should be > + marked GPIO_ACTIVE_LOW. > + maxItems: 1 > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + spi0 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + adc@0 { > + compatible = "adi,ad7780"; > + reg = <0>; > + > + avdd-supply = <&vdd_supply>; > + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; > + }; > + };
> -----Original Message----- > From: Jonathan Cameron [mailto:jic23@kernel.org] > Sent: Sonntag, 26. Mai 2019 18:39 > To: Renato Lui Geh <renatogeh@gmail.com> > Cc: lars@metafoo.de; Hennerich, Michael <Michael.Hennerich@analog.com>; knaack.h@gmx.de; pmeerw@pmeerw.net; > gregkh@linuxfoundation.org; Popa, Stefan Serban <StefanSerban.Popa@analog.com>; Ardelean, Alexandru > <alexandru.Ardelean@analog.com>; robh+dt@kernel.org; mark.rutland@arm.com; linux-iio@vger.kernel.org; > devel@driverdev.osuosl.org; linux-kernel@vger.kernel.org; kernel-usp@googlegroups.com; devicetree@vger.kernel.org > Subject: Re: [PATCH v2 1/2] dt-bindings: iio: adc: add adi,ad7780.yaml binding > > On Fri, 24 May 2019 22:26:30 -0300 > Renato Lui Geh <renatogeh@gmail.com> wrote: > > > This patch adds a YAML binding for the Analog Devices AD7780/1 and > > AD7170/1 analog-to-digital converters. > > > > Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> > Looks good to me, but I'm still finding my feet with these so will > leave it for a few days for others to have time to comment. > > Michael, looking for a quick reply from you to say if you are happy > being explicitly listed as maintainer for this one, or if you'd > rather land it on someone else. Same applies for patch 2. Hi Jonathan, Listing me as an maintainer is ok. Acked-by: Michael Hennerich <michael.hennerich@analog.com> > > Renato, if I seem to have forgotten this in a week or so, feel > free to give me a poke. I've been known to loose patches entirely! > > Thanks, > > Jonathan > > --- > > Changes in v2: > > - vref-supply to avdd-supply > > - remove avdd-supply from required list > > - include adc block in an spi block > > > > .../bindings/iio/adc/adi,ad7780.txt | 48 ---------- > > .../bindings/iio/adc/adi,ad7780.yaml | 87 +++++++++++++++++++ > > 2 files changed, 87 insertions(+), 48 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > deleted file mode 100644 > > index 440e52555349..000000000000 > > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > +++ /dev/null > > @@ -1,48 +0,0 @@ > > -* Analog Devices AD7170/AD7171/AD7780/AD7781 > > - > > -Data sheets: > > - > > -- AD7170: > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > > -- AD7171: > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > > -- AD7780: > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > > -- AD7781: > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > > - > > -Required properties: > > - > > -- compatible: should be one of > > - * "adi,ad7170" > > - * "adi,ad7171" > > - * "adi,ad7780" > > - * "adi,ad7781" > > -- reg: spi chip select number for the device > > -- vref-supply: the regulator supply for the ADC reference voltage > > - > > -Optional properties: > > - > > -- powerdown-gpios: must be the device tree identifier of the PDRST pin. If > > - specified, it will be asserted during driver probe. As the > > - line is active high, it should be marked GPIO_ACTIVE_HIGH. > > -- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for > > - the ad778x chips. If specified, it will be asserted during > > - driver probe. As the line is active low, it should be marked > > - GPIO_ACTIVE_LOW. > > -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only > > - for the ad778x chips. If specified, it will be asserted > > - during driver probe. As the line is active low, it should be > > - marked GPIO_ACTIVE_LOW. > > - > > -Example: > > - > > -adc@0 { > > - compatible = "adi,ad7780"; > > - reg = <0>; > > - vref-supply = <&vdd_supply> > > - > > - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; > > - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; > > - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; > > -}; > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > new file mode 100644 > > index 000000000000..d1109416963c > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > @@ -0,0 +1,87 @@ > > +# SPDX-License-Identifier: GPL-2.0 > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters > > + > > +maintainers: > > + - Michael Hennerich <michael.hennerich@analog.com> > > + > > +description: | > > + The ad7780 is a sigma-delta analog to digital converter. This driver provides > > + reading voltage values and status bits from both the ad778x and ad717x series. > > + Its interface also allows writing on the FILTER and GAIN GPIO pins on the > > + ad778x. > > + > > + Specifications on the converters can be found at: > > + AD7170: > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > > + AD7171: > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > > + AD7780: > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > > + AD7781: > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > > + > > +properties: > > + compatible: > > + enum: > > + - adi,ad7170 > > + - adi,ad7171 > > + - adi,ad7780 > > + - adi,ad7781 > > + > > + reg: > > + maxItems: 1 > > + > > + avdd-supply: > > + description: > > + The regulator supply for the ADC reference voltage. > > + maxItems: 1 > > + > > + powerdown-gpios: > > + description: > > + Must be the device tree identifier of the PDRST pin. If > > + specified, it will be asserted during driver probe. As the > > + line is active high, it should be marked GPIO_ACTIVE_HIGH. > > + maxItems: 1 > > + > > + adi,gain-gpios: > > + description: > > + Must be the device tree identifier of the GAIN pin. Only for > > + the ad778x chips. If specified, it will be asserted during > > + driver probe. As the line is active low, it should be marked > > + GPIO_ACTIVE_LOW. > > + maxItems: 1 > > + > > + adi,filter-gpios: > > + description: > > + Must be the device tree identifier of the FILTER pin. Only > > + for the ad778x chips. If specified, it will be asserted > > + during driver probe. As the line is active low, it should be > > + marked GPIO_ACTIVE_LOW. > > + maxItems: 1 > > + > > +required: > > + - compatible > > + - reg > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + spi0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + adc@0 { > > + compatible = "adi,ad7780"; > > + reg = <0>; > > + > > + avdd-supply = <&vdd_supply>; > > + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > > + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > > + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; > > + }; > > + };
On 05/26, Jonathan Cameron wrote: >On Fri, 24 May 2019 22:26:30 -0300 >Renato Lui Geh <renatogeh@gmail.com> wrote: > >> This patch adds a YAML binding for the Analog Devices AD7780/1 and >> AD7170/1 analog-to-digital converters. >> >> Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> >Looks good to me, but I'm still finding my feet with these so will >leave it for a few days for others to have time to comment. > >Michael, looking for a quick reply from you to say if you are happy >being explicitly listed as maintainer for this one, or if you'd >rather land it on someone else. Same applies for patch 2. > >Renato, if I seem to have forgotten this in a week or so, feel >free to give me a poke. I've been known to loose patches entirely! Hi Jonathan, Just here to give you a poke. :) By the way, in these cases, which would be easier for you? To send you an email like I'm doing right now on last week's thread; or to resend the entire patch(set)? Thanks, Renato > >Thanks, > >Jonathan >> --- >> Changes in v2: >> - vref-supply to avdd-supply >> - remove avdd-supply from required list >> - include adc block in an spi block >> >> .../bindings/iio/adc/adi,ad7780.txt | 48 ---------- >> .../bindings/iio/adc/adi,ad7780.yaml | 87 +++++++++++++++++++ >> 2 files changed, 87 insertions(+), 48 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt >> create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml >> >> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt >> deleted file mode 100644 >> index 440e52555349..000000000000 >> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt >> +++ /dev/null >> @@ -1,48 +0,0 @@ >> -* Analog Devices AD7170/AD7171/AD7780/AD7781 >> - >> -Data sheets: >> - >> -- AD7170: >> - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf >> -- AD7171: >> - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf >> -- AD7780: >> - * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf >> -- AD7781: >> - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf >> - >> -Required properties: >> - >> -- compatible: should be one of >> - * "adi,ad7170" >> - * "adi,ad7171" >> - * "adi,ad7780" >> - * "adi,ad7781" >> -- reg: spi chip select number for the device >> -- vref-supply: the regulator supply for the ADC reference voltage >> - >> -Optional properties: >> - >> -- powerdown-gpios: must be the device tree identifier of the PDRST pin. If >> - specified, it will be asserted during driver probe. As the >> - line is active high, it should be marked GPIO_ACTIVE_HIGH. >> -- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for >> - the ad778x chips. If specified, it will be asserted during >> - driver probe. As the line is active low, it should be marked >> - GPIO_ACTIVE_LOW. >> -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only >> - for the ad778x chips. If specified, it will be asserted >> - during driver probe. As the line is active low, it should be >> - marked GPIO_ACTIVE_LOW. >> - >> -Example: >> - >> -adc@0 { >> - compatible = "adi,ad7780"; >> - reg = <0>; >> - vref-supply = <&vdd_supply> >> - >> - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; >> - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; >> - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; >> -}; >> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml >> new file mode 100644 >> index 000000000000..d1109416963c >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml >> @@ -0,0 +1,87 @@ >> +# SPDX-License-Identifier: GPL-2.0 >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters >> + >> +maintainers: >> + - Michael Hennerich <michael.hennerich@analog.com> >> + >> +description: | >> + The ad7780 is a sigma-delta analog to digital converter. This driver provides >> + reading voltage values and status bits from both the ad778x and ad717x series. >> + Its interface also allows writing on the FILTER and GAIN GPIO pins on the >> + ad778x. >> + >> + Specifications on the converters can be found at: >> + AD7170: >> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf >> + AD7171: >> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf >> + AD7780: >> + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf >> + AD7781: >> + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf >> + >> +properties: >> + compatible: >> + enum: >> + - adi,ad7170 >> + - adi,ad7171 >> + - adi,ad7780 >> + - adi,ad7781 >> + >> + reg: >> + maxItems: 1 >> + >> + avdd-supply: >> + description: >> + The regulator supply for the ADC reference voltage. >> + maxItems: 1 >> + >> + powerdown-gpios: >> + description: >> + Must be the device tree identifier of the PDRST pin. If >> + specified, it will be asserted during driver probe. As the >> + line is active high, it should be marked GPIO_ACTIVE_HIGH. >> + maxItems: 1 >> + >> + adi,gain-gpios: >> + description: >> + Must be the device tree identifier of the GAIN pin. Only for >> + the ad778x chips. If specified, it will be asserted during >> + driver probe. As the line is active low, it should be marked >> + GPIO_ACTIVE_LOW. >> + maxItems: 1 >> + >> + adi,filter-gpios: >> + description: >> + Must be the device tree identifier of the FILTER pin. Only >> + for the ad778x chips. If specified, it will be asserted >> + during driver probe. As the line is active low, it should be >> + marked GPIO_ACTIVE_LOW. >> + maxItems: 1 >> + >> +required: >> + - compatible >> + - reg >> + >> +examples: >> + - | >> + #include <dt-bindings/gpio/gpio.h> >> + spi0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + adc@0 { >> + compatible = "adi,ad7780"; >> + reg = <0>; >> + >> + avdd-supply = <&vdd_supply>; >> + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; >> + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; >> + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; >> + }; >> + }; >
On Wed, 2019-06-05 at 17:35 -0300, Renato Lui Geh wrote: > [External] > > > On 05/26, Jonathan Cameron wrote: > > On Fri, 24 May 2019 22:26:30 -0300 > > Renato Lui Geh <renatogeh@gmail.com> wrote: > > > > > This patch adds a YAML binding for the Analog Devices AD7780/1 and > > > AD7170/1 analog-to-digital converters. > > > > > > Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> > > Looks good to me, but I'm still finding my feet with these so will > > leave it for a few days for others to have time to comment. > > > > Michael, looking for a quick reply from you to say if you are happy > > being explicitly listed as maintainer for this one, or if you'd > > rather land it on someone else. Same applies for patch 2. > > > > Renato, if I seem to have forgotten this in a week or so, feel > > free to give me a poke. I've been known to loose patches entirely! > > Hi Jonathan, > > Just here to give you a poke. :) > > By the way, in these cases, which would be easier for you? To send you > an email like I'm doing right now on last week's thread; or to resend > the entire patch(set)? > I think in this case, maybe let's wait a bit longer. Jonathan has not been active recently. I think a [RESEND] would be a good idea when he gets back/active and misses your patchset. Thanks Alex > Thanks, > Renato > > Thanks, > > > > Jonathan > > > --- > > > Changes in v2: > > > - vref-supply to avdd-supply > > > - remove avdd-supply from required list > > > - include adc block in an spi block > > > > > > .../bindings/iio/adc/adi,ad7780.txt | 48 ---------- > > > .../bindings/iio/adc/adi,ad7780.yaml | 87 +++++++++++++++++++ > > > 2 files changed, 87 insertions(+), 48 deletions(-) > > > delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > deleted file mode 100644 > > > index 440e52555349..000000000000 > > > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > +++ /dev/null > > > @@ -1,48 +0,0 @@ > > > -* Analog Devices AD7170/AD7171/AD7780/AD7781 > > > - > > > -Data sheets: > > > - > > > -- AD7170: > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > > > -- AD7171: > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > > > -- AD7780: > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > > > -- AD7781: > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > > > - > > > -Required properties: > > > - > > > -- compatible: should be one of > > > - * "adi,ad7170" > > > - * "adi,ad7171" > > > - * "adi,ad7780" > > > - * "adi,ad7781" > > > -- reg: spi chip select number for the device > > > -- vref-supply: the regulator supply for the ADC reference voltage > > > - > > > -Optional properties: > > > - > > > -- powerdown-gpios: must be the device tree identifier of the PDRST pin. If > > > - specified, it will be asserted during driver probe. As the > > > - line is active high, it should be marked GPIO_ACTIVE_HIGH. > > > -- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for > > > - the ad778x chips. If specified, it will be asserted during > > > - driver probe. As the line is active low, it should be marked > > > - GPIO_ACTIVE_LOW. > > > -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only > > > - for the ad778x chips. If specified, it will be asserted > > > - during driver probe. As the line is active low, it should be > > > - marked GPIO_ACTIVE_LOW. > > > - > > > -Example: > > > - > > > -adc@0 { > > > - compatible = "adi,ad7780"; > > > - reg = <0>; > > > - vref-supply = <&vdd_supply> > > > - > > > - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; > > > - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; > > > - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; > > > -}; > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > new file mode 100644 > > > index 000000000000..d1109416963c > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > @@ -0,0 +1,87 @@ > > > +# SPDX-License-Identifier: GPL-2.0 > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters > > > + > > > +maintainers: > > > + - Michael Hennerich <michael.hennerich@analog.com> > > > + > > > +description: | > > > + The ad7780 is a sigma-delta analog to digital converter. This driver provides > > > + reading voltage values and status bits from both the ad778x and ad717x series. > > > + Its interface also allows writing on the FILTER and GAIN GPIO pins on the > > > + ad778x. > > > + > > > + Specifications on the converters can be found at: > > > + AD7170: > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > > > + AD7171: > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > > > + AD7780: > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > > > + AD7781: > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > > > + > > > +properties: > > > + compatible: > > > + enum: > > > + - adi,ad7170 > > > + - adi,ad7171 > > > + - adi,ad7780 > > > + - adi,ad7781 > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + avdd-supply: > > > + description: > > > + The regulator supply for the ADC reference voltage. > > > + maxItems: 1 > > > + > > > + powerdown-gpios: > > > + description: > > > + Must be the device tree identifier of the PDRST pin. If > > > + specified, it will be asserted during driver probe. As the > > > + line is active high, it should be marked GPIO_ACTIVE_HIGH. > > > + maxItems: 1 > > > + > > > + adi,gain-gpios: > > > + description: > > > + Must be the device tree identifier of the GAIN pin. Only for > > > + the ad778x chips. If specified, it will be asserted during > > > + driver probe. As the line is active low, it should be marked > > > + GPIO_ACTIVE_LOW. > > > + maxItems: 1 > > > + > > > + adi,filter-gpios: > > > + description: > > > + Must be the device tree identifier of the FILTER pin. Only > > > + for the ad778x chips. If specified, it will be asserted > > > + during driver probe. As the line is active low, it should be > > > + marked GPIO_ACTIVE_LOW. > > > + maxItems: 1 > > > + > > > +required: > > > + - compatible > > > + - reg > > > + > > > +examples: > > > + - | > > > + #include <dt-bindings/gpio/gpio.h> > > > + spi0 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + adc@0 { > > > + compatible = "adi,ad7780"; > > > + reg = <0>; > > > + > > > + avdd-supply = <&vdd_supply>; > > > + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > > > + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > > > + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; > > > + }; > > > + };
On Thu, 6 Jun 2019 11:13:52 +0000 "Ardelean, Alexandru" <alexandru.Ardelean@analog.com> wrote: > On Wed, 2019-06-05 at 17:35 -0300, Renato Lui Geh wrote: > > [External] > > > > > > On 05/26, Jonathan Cameron wrote: > > > On Fri, 24 May 2019 22:26:30 -0300 > > > Renato Lui Geh <renatogeh@gmail.com> wrote: > > > > > > > This patch adds a YAML binding for the Analog Devices AD7780/1 and > > > > AD7170/1 analog-to-digital converters. > > > > > > > > Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> > > > Looks good to me, but I'm still finding my feet with these so will > > > leave it for a few days for others to have time to comment. > > > > > > Michael, looking for a quick reply from you to say if you are happy > > > being explicitly listed as maintainer for this one, or if you'd > > > rather land it on someone else. Same applies for patch 2. > > > > > > Renato, if I seem to have forgotten this in a week or so, feel > > > free to give me a poke. I've been known to loose patches entirely! > > > > Hi Jonathan, > > > > Just here to give you a poke. :) > > > > By the way, in these cases, which would be easier for you? To send you > > an email like I'm doing right now on last week's thread; or to resend > > the entire patch(set)? > > > > I think in this case, maybe let's wait a bit longer. > Jonathan has not been active recently. > > I think a [RESEND] would be a good idea when he gets back/active and misses your patchset. > Sorry, was away last weekend and haven't caught up since. I should be fine to pick this up this weekend. A ping like this is fine rather than a resend. Thanks, Jonathan > Thanks > Alex > > > Thanks, > > Renato > > > Thanks, > > > > > > Jonathan > > > > --- > > > > Changes in v2: > > > > - vref-supply to avdd-supply > > > > - remove avdd-supply from required list > > > > - include adc block in an spi block > > > > > > > > .../bindings/iio/adc/adi,ad7780.txt | 48 ---------- > > > > .../bindings/iio/adc/adi,ad7780.yaml | 87 +++++++++++++++++++ > > > > 2 files changed, 87 insertions(+), 48 deletions(-) > > > > delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > > deleted file mode 100644 > > > > index 440e52555349..000000000000 > > > > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > > +++ /dev/null > > > > @@ -1,48 +0,0 @@ > > > > -* Analog Devices AD7170/AD7171/AD7780/AD7781 > > > > - > > > > -Data sheets: > > > > - > > > > -- AD7170: > > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > > > > -- AD7171: > > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > > > > -- AD7780: > > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > > > > -- AD7781: > > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > > > > - > > > > -Required properties: > > > > - > > > > -- compatible: should be one of > > > > - * "adi,ad7170" > > > > - * "adi,ad7171" > > > > - * "adi,ad7780" > > > > - * "adi,ad7781" > > > > -- reg: spi chip select number for the device > > > > -- vref-supply: the regulator supply for the ADC reference voltage > > > > - > > > > -Optional properties: > > > > - > > > > -- powerdown-gpios: must be the device tree identifier of the PDRST pin. If > > > > - specified, it will be asserted during driver probe. As the > > > > - line is active high, it should be marked GPIO_ACTIVE_HIGH. > > > > -- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for > > > > - the ad778x chips. If specified, it will be asserted during > > > > - driver probe. As the line is active low, it should be marked > > > > - GPIO_ACTIVE_LOW. > > > > -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only > > > > - for the ad778x chips. If specified, it will be asserted > > > > - during driver probe. As the line is active low, it should be > > > > - marked GPIO_ACTIVE_LOW. > > > > - > > > > -Example: > > > > - > > > > -adc@0 { > > > > - compatible = "adi,ad7780"; > > > > - reg = <0>; > > > > - vref-supply = <&vdd_supply> > > > > - > > > > - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; > > > > - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; > > > > - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; > > > > -}; > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > new file mode 100644 > > > > index 000000000000..d1109416963c > > > > --- /dev/null > > > > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > @@ -0,0 +1,87 @@ > > > > +# SPDX-License-Identifier: GPL-2.0 > > > > +%YAML 1.2 > > > > +--- > > > > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > + > > > > +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters > > > > + > > > > +maintainers: > > > > + - Michael Hennerich <michael.hennerich@analog.com> > > > > + > > > > +description: | > > > > + The ad7780 is a sigma-delta analog to digital converter. This driver provides > > > > + reading voltage values and status bits from both the ad778x and ad717x series. > > > > + Its interface also allows writing on the FILTER and GAIN GPIO pins on the > > > > + ad778x. > > > > + > > > > + Specifications on the converters can be found at: > > > > + AD7170: > > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > > > > + AD7171: > > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > > > > + AD7780: > > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > > > > + AD7781: > > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > > > > + > > > > +properties: > > > > + compatible: > > > > + enum: > > > > + - adi,ad7170 > > > > + - adi,ad7171 > > > > + - adi,ad7780 > > > > + - adi,ad7781 > > > > + > > > > + reg: > > > > + maxItems: 1 > > > > + > > > > + avdd-supply: > > > > + description: > > > > + The regulator supply for the ADC reference voltage. > > > > + maxItems: 1 > > > > + > > > > + powerdown-gpios: > > > > + description: > > > > + Must be the device tree identifier of the PDRST pin. If > > > > + specified, it will be asserted during driver probe. As the > > > > + line is active high, it should be marked GPIO_ACTIVE_HIGH. > > > > + maxItems: 1 > > > > + > > > > + adi,gain-gpios: > > > > + description: > > > > + Must be the device tree identifier of the GAIN pin. Only for > > > > + the ad778x chips. If specified, it will be asserted during > > > > + driver probe. As the line is active low, it should be marked > > > > + GPIO_ACTIVE_LOW. > > > > + maxItems: 1 > > > > + > > > > + adi,filter-gpios: > > > > + description: > > > > + Must be the device tree identifier of the FILTER pin. Only > > > > + for the ad778x chips. If specified, it will be asserted > > > > + during driver probe. As the line is active low, it should be > > > > + marked GPIO_ACTIVE_LOW. > > > > + maxItems: 1 > > > > + > > > > +required: > > > > + - compatible > > > > + - reg > > > > + > > > > +examples: > > > > + - | > > > > + #include <dt-bindings/gpio/gpio.h> > > > > + spi0 { > > > > + #address-cells = <1>; > > > > + #size-cells = <0>; > > > > + > > > > + adc@0 { > > > > + compatible = "adi,ad7780"; > > > > + reg = <0>; > > > > + > > > > + avdd-supply = <&vdd_supply>; > > > > + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > > > > + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > > > > + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; > > > > + }; > > > > + };
On Thu, 6 Jun 2019 16:52:14 +0100 Jonathan Cameron <jonathan.cameron@huawei.com> wrote: > On Thu, 6 Jun 2019 11:13:52 +0000 > "Ardelean, Alexandru" <alexandru.Ardelean@analog.com> wrote: > > > On Wed, 2019-06-05 at 17:35 -0300, Renato Lui Geh wrote: > > > [External] > > > > > > > > > On 05/26, Jonathan Cameron wrote: > > > > On Fri, 24 May 2019 22:26:30 -0300 > > > > Renato Lui Geh <renatogeh@gmail.com> wrote: > > > > > > > > > This patch adds a YAML binding for the Analog Devices AD7780/1 and > > > > > AD7170/1 analog-to-digital converters. > > > > > > > > > > Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> > > > > Looks good to me, but I'm still finding my feet with these so will > > > > leave it for a few days for others to have time to comment. > > > > > > > > Michael, looking for a quick reply from you to say if you are happy > > > > being explicitly listed as maintainer for this one, or if you'd > > > > rather land it on someone else. Same applies for patch 2. > > > > > > > > Renato, if I seem to have forgotten this in a week or so, feel > > > > free to give me a poke. I've been known to loose patches entirely! > > > > > > Hi Jonathan, > > > > > > Just here to give you a poke. :) > > > > > > By the way, in these cases, which would be easier for you? To send you > > > an email like I'm doing right now on last week's thread; or to resend > > > the entire patch(set)? > > > > > > > I think in this case, maybe let's wait a bit longer. > > Jonathan has not been active recently. > > > > I think a [RESEND] would be a good idea when he gets back/active and misses your patchset. > > > Sorry, was away last weekend and haven't caught up since. > > I should be fine to pick this up this weekend. > > A ping like this is fine rather than a resend. I've applied this the togreg branch of iio.git and pushed out as testing. Note I'm not planning a pull request for a week or so, so welcome any additional comments anyone has when they are able to make them. Thanks, Jonathan > > Thanks, > > Jonathan > > > Thanks > > Alex > > > > > Thanks, > > > Renato > > > > Thanks, > > > > > > > > Jonathan > > > > > --- > > > > > Changes in v2: > > > > > - vref-supply to avdd-supply > > > > > - remove avdd-supply from required list > > > > > - include adc block in an spi block > > > > > > > > > > .../bindings/iio/adc/adi,ad7780.txt | 48 ---------- > > > > > .../bindings/iio/adc/adi,ad7780.yaml | 87 +++++++++++++++++++ > > > > > 2 files changed, 87 insertions(+), 48 deletions(-) > > > > > delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > > > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > > > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > > > deleted file mode 100644 > > > > > index 440e52555349..000000000000 > > > > > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > > > > +++ /dev/null > > > > > @@ -1,48 +0,0 @@ > > > > > -* Analog Devices AD7170/AD7171/AD7780/AD7781 > > > > > - > > > > > -Data sheets: > > > > > - > > > > > -- AD7170: > > > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > > > > > -- AD7171: > > > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > > > > > -- AD7780: > > > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > > > > > -- AD7781: > > > > > - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > > > > > - > > > > > -Required properties: > > > > > - > > > > > -- compatible: should be one of > > > > > - * "adi,ad7170" > > > > > - * "adi,ad7171" > > > > > - * "adi,ad7780" > > > > > - * "adi,ad7781" > > > > > -- reg: spi chip select number for the device > > > > > -- vref-supply: the regulator supply for the ADC reference voltage > > > > > - > > > > > -Optional properties: > > > > > - > > > > > -- powerdown-gpios: must be the device tree identifier of the PDRST pin. If > > > > > - specified, it will be asserted during driver probe. As the > > > > > - line is active high, it should be marked GPIO_ACTIVE_HIGH. > > > > > -- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for > > > > > - the ad778x chips. If specified, it will be asserted during > > > > > - driver probe. As the line is active low, it should be marked > > > > > - GPIO_ACTIVE_LOW. > > > > > -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only > > > > > - for the ad778x chips. If specified, it will be asserted > > > > > - during driver probe. As the line is active low, it should be > > > > > - marked GPIO_ACTIVE_LOW. > > > > > - > > > > > -Example: > > > > > - > > > > > -adc@0 { > > > > > - compatible = "adi,ad7780"; > > > > > - reg = <0>; > > > > > - vref-supply = <&vdd_supply> > > > > > - > > > > > - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; > > > > > - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; > > > > > - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; > > > > > -}; > > > > > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > > new file mode 100644 > > > > > index 000000000000..d1109416963c > > > > > --- /dev/null > > > > > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > > @@ -0,0 +1,87 @@ > > > > > +# SPDX-License-Identifier: GPL-2.0 > > > > > +%YAML 1.2 > > > > > +--- > > > > > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# > > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > > > + > > > > > +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters > > > > > + > > > > > +maintainers: > > > > > + - Michael Hennerich <michael.hennerich@analog.com> > > > > > + > > > > > +description: | > > > > > + The ad7780 is a sigma-delta analog to digital converter. This driver provides > > > > > + reading voltage values and status bits from both the ad778x and ad717x series. > > > > > + Its interface also allows writing on the FILTER and GAIN GPIO pins on the > > > > > + ad778x. > > > > > + > > > > > + Specifications on the converters can be found at: > > > > > + AD7170: > > > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf > > > > > + AD7171: > > > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf > > > > > + AD7780: > > > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf > > > > > + AD7781: > > > > > + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf > > > > > + > > > > > +properties: > > > > > + compatible: > > > > > + enum: > > > > > + - adi,ad7170 > > > > > + - adi,ad7171 > > > > > + - adi,ad7780 > > > > > + - adi,ad7781 > > > > > + > > > > > + reg: > > > > > + maxItems: 1 > > > > > + > > > > > + avdd-supply: > > > > > + description: > > > > > + The regulator supply for the ADC reference voltage. > > > > > + maxItems: 1 > > > > > + > > > > > + powerdown-gpios: > > > > > + description: > > > > > + Must be the device tree identifier of the PDRST pin. If > > > > > + specified, it will be asserted during driver probe. As the > > > > > + line is active high, it should be marked GPIO_ACTIVE_HIGH. > > > > > + maxItems: 1 > > > > > + > > > > > + adi,gain-gpios: > > > > > + description: > > > > > + Must be the device tree identifier of the GAIN pin. Only for > > > > > + the ad778x chips. If specified, it will be asserted during > > > > > + driver probe. As the line is active low, it should be marked > > > > > + GPIO_ACTIVE_LOW. > > > > > + maxItems: 1 > > > > > + > > > > > + adi,filter-gpios: > > > > > + description: > > > > > + Must be the device tree identifier of the FILTER pin. Only > > > > > + for the ad778x chips. If specified, it will be asserted > > > > > + during driver probe. As the line is active low, it should be > > > > > + marked GPIO_ACTIVE_LOW. > > > > > + maxItems: 1 > > > > > + > > > > > +required: > > > > > + - compatible > > > > > + - reg > > > > > + > > > > > +examples: > > > > > + - | > > > > > + #include <dt-bindings/gpio/gpio.h> > > > > > + spi0 { > > > > > + #address-cells = <1>; > > > > > + #size-cells = <0>; > > > > > + > > > > > + adc@0 { > > > > > + compatible = "adi,ad7780"; > > > > > + reg = <0>; > > > > > + > > > > > + avdd-supply = <&vdd_supply>; > > > > > + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; > > > > > + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; > > > > > + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; > > > > > + }; > > > > > + }; > >
On Fri, 24 May 2019 22:26:30 -0300, Renato Lui Geh wrote: > This patch adds a YAML binding for the Analog Devices AD7780/1 and > AD7170/1 analog-to-digital converters. > > Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> > --- > Changes in v2: > - vref-supply to avdd-supply > - remove avdd-supply from required list > - include adc block in an spi block > > .../bindings/iio/adc/adi,ad7780.txt | 48 ---------- > .../bindings/iio/adc/adi,ad7780.yaml | 87 +++++++++++++++++++ > 2 files changed, 87 insertions(+), 48 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > Reviewed-by: Rob Herring <robh@kernel.org>
On Fri, 14 Jun 2019 13:43:02 -0600 Rob Herring <robh@kernel.org> wrote: > On Fri, 24 May 2019 22:26:30 -0300, Renato Lui Geh wrote: > > This patch adds a YAML binding for the Analog Devices AD7780/1 and > > AD7170/1 analog-to-digital converters. > > > > Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> > > --- > > Changes in v2: > > - vref-supply to avdd-supply > > - remove avdd-supply from required list > > - include adc block in an spi block > > > > .../bindings/iio/adc/adi,ad7780.txt | 48 ---------- > > .../bindings/iio/adc/adi,ad7780.yaml | 87 +++++++++++++++++++ > > 2 files changed, 87 insertions(+), 48 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt > > create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml > > > > Reviewed-by: Rob Herring <robh@kernel.org> Thanks. As I'd not yet pushed out as togreg (rather than testing) I've rebased to add your RB. Thanks, Jonathan
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt deleted file mode 100644 index 440e52555349..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt +++ /dev/null @@ -1,48 +0,0 @@ -* Analog Devices AD7170/AD7171/AD7780/AD7781 - -Data sheets: - -- AD7170: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf -- AD7171: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf -- AD7780: - * https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf -- AD7781: - * https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf - -Required properties: - -- compatible: should be one of - * "adi,ad7170" - * "adi,ad7171" - * "adi,ad7780" - * "adi,ad7781" -- reg: spi chip select number for the device -- vref-supply: the regulator supply for the ADC reference voltage - -Optional properties: - -- powerdown-gpios: must be the device tree identifier of the PDRST pin. If - specified, it will be asserted during driver probe. As the - line is active high, it should be marked GPIO_ACTIVE_HIGH. -- adi,gain-gpios: must be the device tree identifier of the GAIN pin. Only for - the ad778x chips. If specified, it will be asserted during - driver probe. As the line is active low, it should be marked - GPIO_ACTIVE_LOW. -- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only - for the ad778x chips. If specified, it will be asserted - during driver probe. As the line is active low, it should be - marked GPIO_ACTIVE_LOW. - -Example: - -adc@0 { - compatible = "adi,ad7780"; - reg = <0>; - vref-supply = <&vdd_supply> - - powerdown-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - adi,gain-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; -}; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml new file mode 100644 index 000000000000..d1109416963c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + The ad7780 is a sigma-delta analog to digital converter. This driver provides + reading voltage values and status bits from both the ad778x and ad717x series. + Its interface also allows writing on the FILTER and GAIN GPIO pins on the + ad778x. + + Specifications on the converters can be found at: + AD7170: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf + AD7171: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf + AD7780: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf + AD7781: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf + +properties: + compatible: + enum: + - adi,ad7170 + - adi,ad7171 + - adi,ad7780 + - adi,ad7781 + + reg: + maxItems: 1 + + avdd-supply: + description: + The regulator supply for the ADC reference voltage. + maxItems: 1 + + powerdown-gpios: + description: + Must be the device tree identifier of the PDRST pin. If + specified, it will be asserted during driver probe. As the + line is active high, it should be marked GPIO_ACTIVE_HIGH. + maxItems: 1 + + adi,gain-gpios: + description: + Must be the device tree identifier of the GAIN pin. Only for + the ad778x chips. If specified, it will be asserted during + driver probe. As the line is active low, it should be marked + GPIO_ACTIVE_LOW. + maxItems: 1 + + adi,filter-gpios: + description: + Must be the device tree identifier of the FILTER pin. Only + for the ad778x chips. If specified, it will be asserted + during driver probe. As the line is active low, it should be + marked GPIO_ACTIVE_LOW. + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi0 { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7780"; + reg = <0>; + + avdd-supply = <&vdd_supply>; + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + }; + };
This patch adds a YAML binding for the Analog Devices AD7780/1 and AD7170/1 analog-to-digital converters. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> --- Changes in v2: - vref-supply to avdd-supply - remove avdd-supply from required list - include adc block in an spi block .../bindings/iio/adc/adi,ad7780.txt | 48 ---------- .../bindings/iio/adc/adi,ad7780.yaml | 87 +++++++++++++++++++ 2 files changed, 87 insertions(+), 48 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml