| Message ID | 6195f3cd21636a5f85c0107b5c3b217be868a4b9.1559831663.git.vitor.soares@synopsys.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add ST lsm6dso i3c support | expand |
> For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in > spi and i2c mode. > > The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to > them. > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> > --- Hi Vitor, just a nit inline, but you can add my acked-by for st_lsm6dsx part in v3 Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Regards, Lorenzo > Changes in v2: > Add support for LSM6DSR > Set pm_ops to st_lsm6dsx_pm_ops > > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 ++- > drivers/iio/imu/st_lsm6dsx/Makefile | 1 + > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 76 +++++++++++++++++++++++++++++ > 3 files changed, 84 insertions(+), 1 deletion(-) > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > index 002a423..8115936 100644 > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > @@ -2,11 +2,12 @@ > > config IIO_ST_LSM6DSX > tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" > - depends on (I2C || SPI) > + depends on (I2C || SPI || I3C) > select IIO_BUFFER > select IIO_KFIFO_BUF > select IIO_ST_LSM6DSX_I2C if (I2C) > select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) > + select IIO_ST_LSM6DSX_I3C if (I3C) > help > Say yes here to build support for STMicroelectronics LSM6DSx imu > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > @@ -24,3 +25,8 @@ config IIO_ST_LSM6DSX_SPI > tristate > depends on IIO_ST_LSM6DSX > select REGMAP_SPI > + [...] > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/i3c/device.h> > +#include <linux/i3c/master.h> > +#include <linux/slab.h> > +#include <linux/of.h> > +#include <linux/regmap.h> > + > +#include "st_lsm6dsx.h" > + > +#define NAME_SIZE 32 > + > +struct st_lsm6dsx_i3c_data { > + const char name[NAME_SIZE]; > + enum st_lsm6dsx_hw_id id; > +}; > + > +enum st_lsm6dsx_i3c_data_id { > + ST_LSM6DSO_I3C_DATA_ID, > + ST_LSM6DSR_I3C_DATA_ID, > +}; do we really need them? maybe just use hw_data[n] adding a comment to indicate the related sensor defining st_lsm6dsx_i3c_ids[] > + > +static const struct st_lsm6dsx_i3c_data hw_data[] = { > + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID }, > + { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, > +}; > + > +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > +}; > + > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev) > +{ > + const struct i3c_device_id *id = i3c_get_device_id(i3cdev); > + const struct st_lsm6dsx_i3c_data *hw_data = id->data; > + struct regmap *regmap; > + > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n", > + (int)PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id, > + hw_data->name, regmap); > +} > + > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { > + I3C_DEVICE(0x0104, 0x006C, &hw_data[ST_LSM6DSO_I3C_DATA_ID]), > + I3C_DEVICE(0x0104, 0x006B, &hw_data[ST_LSM6DSR_I3C_DATA_ID]), > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); > + > +static struct i3c_driver st_lsm6dsx_driver = { > + .driver = { > + .name = "st_lsm6dsx_i3c", > + .pm = &st_lsm6dsx_pm_ops, > + }, > + .probe = st_lsm6dsx_i3c_probe, > + .id_table = st_lsm6dsx_i3c_ids, > +}; > +module_i3c_driver(st_lsm6dsx_driver); > + > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.7.4 >
On Thu, 6 Jun 2019 17:12:04 +0200 Vitor Soares <Vitor.Soares@synopsys.com> wrote: > For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in > spi and i2c mode. > > The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to > them. > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> > --- > Changes in v2: > Add support for LSM6DSR > Set pm_ops to st_lsm6dsx_pm_ops > > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 ++- > drivers/iio/imu/st_lsm6dsx/Makefile | 1 + > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 76 +++++++++++++++++++++++++++++ > 3 files changed, 84 insertions(+), 1 deletion(-) > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > index 002a423..8115936 100644 > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > @@ -2,11 +2,12 @@ > > config IIO_ST_LSM6DSX > tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" > - depends on (I2C || SPI) > + depends on (I2C || SPI || I3C) > select IIO_BUFFER > select IIO_KFIFO_BUF > select IIO_ST_LSM6DSX_I2C if (I2C) > select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) > + select IIO_ST_LSM6DSX_I3C if (I3C) > help > Say yes here to build support for STMicroelectronics LSM6DSx imu > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > @@ -24,3 +25,8 @@ config IIO_ST_LSM6DSX_SPI > tristate > depends on IIO_ST_LSM6DSX > select REGMAP_SPI > + > +config IIO_ST_LSM6DSX_I3C > + tristate > + depends on IIO_ST_LSM6DSX > + select REGMAP_I3C > diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile > index 28cc673..57cbcd6 100644 > --- a/drivers/iio/imu/st_lsm6dsx/Makefile > +++ b/drivers/iio/imu/st_lsm6dsx/Makefile > @@ -5,3 +5,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ > obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o > obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o > obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o > +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > new file mode 100644 > index 0000000..70b70d1 > --- /dev/null > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > @@ -0,0 +1,76 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates. > + * > + * Author: Vitor Soares <vitor.soares@synopsys.com> > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/i3c/device.h> > +#include <linux/i3c/master.h> > +#include <linux/slab.h> > +#include <linux/of.h> > +#include <linux/regmap.h> > + > +#include "st_lsm6dsx.h" > + > +#define NAME_SIZE 32 > + > +struct st_lsm6dsx_i3c_data { > + const char name[NAME_SIZE]; I think I mentioned already that you can simply have const char *name; > + enum st_lsm6dsx_hw_id id; > +}; > + > +enum st_lsm6dsx_i3c_data_id { > + ST_LSM6DSO_I3C_DATA_ID, > + ST_LSM6DSR_I3C_DATA_ID, > +}; > + > +static const struct st_lsm6dsx_i3c_data hw_data[] = { > + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID }, > + { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, > +}; > + > +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > +}; > + > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev) > +{ > + const struct i3c_device_id *id = i3c_get_device_id(i3cdev); > + const struct st_lsm6dsx_i3c_data *hw_data = id->data; > + struct regmap *regmap; > + > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config); > + if (IS_ERR(regmap)) { > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n", > + (int)PTR_ERR(regmap)); > + return PTR_ERR(regmap); > + } > + > + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id, > + hw_data->name, regmap); > +} > + > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { > + I3C_DEVICE(0x0104, 0x006C, &hw_data[ST_LSM6DSO_I3C_DATA_ID]), > + I3C_DEVICE(0x0104, 0x006B, &hw_data[ST_LSM6DSR_I3C_DATA_ID]), Still find that form counter-intuitive since you'd have to first go look at what's the value of ST_LSM6DSO_I3C_DATA_ID, then go check the entry in hw_data to find what's in there. Too many ways to get things wrong IMHO. The following form would make it much more obvious/easy to follow: static const st_lsm6dsx_i3c_data st_lsm6dso_i3c_data = { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID, }; static const st_lsm6dsx_i3c_data st_lsm6dsr_i3c_data = { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID, }; static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { I3C_DEVICE(0x0104, 0x006C, &st_lsm6dso_i3c_data), I3C_DEVICE(0x0104, 0x006B, &st_lsm6dsr_i3c_data), }; Note that I don't see why we need to pass both the name and the ID to st_lsm6dsx_probe(). I'd expect the name to be easily deducible from the ID (using a name table whose index would match the ST_XXX_ID). If you do this change you would actually get rid of the st_lsm6dsx_i3c_data struct and instead have: static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID), I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID), }; > + { /* sentinel */ }, > +}; > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); > + > +static struct i3c_driver st_lsm6dsx_driver = { > + .driver = { > + .name = "st_lsm6dsx_i3c", > + .pm = &st_lsm6dsx_pm_ops, > + }, > + .probe = st_lsm6dsx_i3c_probe, > + .id_table = st_lsm6dsx_i3c_ids, > +}; > +module_i3c_driver(st_lsm6dsx_driver); > + > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); > +MODULE_LICENSE("GPL v2");
> On Thu, 6 Jun 2019 17:12:04 +0200 > Vitor Soares <Vitor.Soares@synopsys.com> wrote: > > > For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in > > spi and i2c mode. > > > > The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to > > them. > > > > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> > > --- > > Changes in v2: > > Add support for LSM6DSR > > Set pm_ops to st_lsm6dsx_pm_ops > > > > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 ++- > > drivers/iio/imu/st_lsm6dsx/Makefile | 1 + > > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 76 +++++++++++++++++++++++++++++ > > 3 files changed, 84 insertions(+), 1 deletion(-) > > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > > > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > > index 002a423..8115936 100644 > > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig > > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > > @@ -2,11 +2,12 @@ > > > > config IIO_ST_LSM6DSX > > tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" > > - depends on (I2C || SPI) > > + depends on (I2C || SPI || I3C) > > select IIO_BUFFER > > select IIO_KFIFO_BUF > > select IIO_ST_LSM6DSX_I2C if (I2C) > > select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) > > + select IIO_ST_LSM6DSX_I3C if (I3C) > > help > > Say yes here to build support for STMicroelectronics LSM6DSx imu > > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, > > @@ -24,3 +25,8 @@ config IIO_ST_LSM6DSX_SPI > > tristate > > depends on IIO_ST_LSM6DSX > > select REGMAP_SPI > > + > > +config IIO_ST_LSM6DSX_I3C > > + tristate > > + depends on IIO_ST_LSM6DSX > > + select REGMAP_I3C > > diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile > > index 28cc673..57cbcd6 100644 > > --- a/drivers/iio/imu/st_lsm6dsx/Makefile > > +++ b/drivers/iio/imu/st_lsm6dsx/Makefile > > @@ -5,3 +5,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ > > obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o > > obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o > > obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o > > +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o > > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > new file mode 100644 > > index 0000000..70b70d1 > > --- /dev/null > > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c > > @@ -0,0 +1,76 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates. > > + * > > + * Author: Vitor Soares <vitor.soares@synopsys.com> > > + */ > > + > > +#include <linux/kernel.h> > > +#include <linux/module.h> > > +#include <linux/i3c/device.h> > > +#include <linux/i3c/master.h> > > +#include <linux/slab.h> > > +#include <linux/of.h> > > +#include <linux/regmap.h> > > + > > +#include "st_lsm6dsx.h" > > + > > +#define NAME_SIZE 32 > > + > > +struct st_lsm6dsx_i3c_data { > > + const char name[NAME_SIZE]; > > I think I mentioned already that you can simply have > > const char *name; > > > + enum st_lsm6dsx_hw_id id; > > +}; > > + > > +enum st_lsm6dsx_i3c_data_id { > > + ST_LSM6DSO_I3C_DATA_ID, > > + ST_LSM6DSR_I3C_DATA_ID, > > +}; > > + > > +static const struct st_lsm6dsx_i3c_data hw_data[] = { > > + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID }, > > + { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, > > +}; > > + > > +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > +}; > > + > > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev) > > +{ > > + const struct i3c_device_id *id = i3c_get_device_id(i3cdev); > > + const struct st_lsm6dsx_i3c_data *hw_data = id->data; > > + struct regmap *regmap; > > + > > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config); > > + if (IS_ERR(regmap)) { > > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n", > > + (int)PTR_ERR(regmap)); > > + return PTR_ERR(regmap); > > + } > > + > > + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id, > > + hw_data->name, regmap); > > +} > > + > > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { > > + I3C_DEVICE(0x0104, 0x006C, &hw_data[ST_LSM6DSO_I3C_DATA_ID]), > > + I3C_DEVICE(0x0104, 0x006B, &hw_data[ST_LSM6DSR_I3C_DATA_ID]), > > Still find that form counter-intuitive since you'd have to first go > look at what's the value of ST_LSM6DSO_I3C_DATA_ID, then go check the > entry in hw_data to find what's in there. Too many ways to get things > wrong IMHO. > > The following form would make it much more obvious/easy to follow: > > static const st_lsm6dsx_i3c_data st_lsm6dso_i3c_data = { > ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID, > }; > > static const st_lsm6dsx_i3c_data st_lsm6dsr_i3c_data = { > ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID, > }; > > static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { > I3C_DEVICE(0x0104, 0x006C, &st_lsm6dso_i3c_data), > I3C_DEVICE(0x0104, 0x006B, &st_lsm6dsr_i3c_data), > }; > > Note that I don't see why we need to pass both the name and the ID to > st_lsm6dsx_probe(). I'd expect the name to be easily deducible from the > ID (using a name table whose index would match the ST_XXX_ID). for spi/i2c we got it for free since spi_device_id/i2c_device_id has a name field we can use but we can probably align it to i3c case Regards, Lorenzo > > If you do this change you would actually get rid of the > st_lsm6dsx_i3c_data struct and instead have: > > static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { > I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID), > I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID), > }; > > > + { /* sentinel */ }, > > +}; > > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); > > + > > +static struct i3c_driver st_lsm6dsx_driver = { > > + .driver = { > > + .name = "st_lsm6dsx_i3c", > > + .pm = &st_lsm6dsx_pm_ops, > > + }, > > + .probe = st_lsm6dsx_i3c_probe, > > + .id_table = st_lsm6dsx_i3c_ids, > > +}; > > +module_i3c_driver(st_lsm6dsx_driver); > > + > > +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); > > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); > > +MODULE_LICENSE("GPL v2"); >
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig index 002a423..8115936 100644 --- a/drivers/iio/imu/st_lsm6dsx/Kconfig +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -2,11 +2,12 @@ config IIO_ST_LSM6DSX tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" - depends on (I2C || SPI) + depends on (I2C || SPI || I3C) select IIO_BUFFER select IIO_KFIFO_BUF select IIO_ST_LSM6DSX_I2C if (I2C) select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) + select IIO_ST_LSM6DSX_I3C if (I3C) help Say yes here to build support for STMicroelectronics LSM6DSx imu sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm, @@ -24,3 +25,8 @@ config IIO_ST_LSM6DSX_SPI tristate depends on IIO_ST_LSM6DSX select REGMAP_SPI + +config IIO_ST_LSM6DSX_I3C + tristate + depends on IIO_ST_LSM6DSX + select REGMAP_I3C diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile index 28cc673..57cbcd6 100644 --- a/drivers/iio/imu/st_lsm6dsx/Makefile +++ b/drivers/iio/imu/st_lsm6dsx/Makefile @@ -5,3 +5,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \ obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c new file mode 100644 index 0000000..70b70d1 --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates. + * + * Author: Vitor Soares <vitor.soares@synopsys.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i3c/device.h> +#include <linux/i3c/master.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/regmap.h> + +#include "st_lsm6dsx.h" + +#define NAME_SIZE 32 + +struct st_lsm6dsx_i3c_data { + const char name[NAME_SIZE]; + enum st_lsm6dsx_hw_id id; +}; + +enum st_lsm6dsx_i3c_data_id { + ST_LSM6DSO_I3C_DATA_ID, + ST_LSM6DSR_I3C_DATA_ID, +}; + +static const struct st_lsm6dsx_i3c_data hw_data[] = { + { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID }, + { ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID }, +}; + +static const struct regmap_config st_lsm6dsx_i3c_regmap_config = { + .reg_bits = 8, + .val_bits = 8, +}; + +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev) +{ + const struct i3c_device_id *id = i3c_get_device_id(i3cdev); + const struct st_lsm6dsx_i3c_data *hw_data = id->data; + struct regmap *regmap; + + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n", + (int)PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + + return st_lsm6dsx_probe(&i3cdev->dev, 0, hw_data->id, + hw_data->name, regmap); +} + +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = { + I3C_DEVICE(0x0104, 0x006C, &hw_data[ST_LSM6DSO_I3C_DATA_ID]), + I3C_DEVICE(0x0104, 0x006B, &hw_data[ST_LSM6DSR_I3C_DATA_ID]), + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids); + +static struct i3c_driver st_lsm6dsx_driver = { + .driver = { + .name = "st_lsm6dsx_i3c", + .pm = &st_lsm6dsx_pm_ops, + }, + .probe = st_lsm6dsx_i3c_probe, + .id_table = st_lsm6dsx_i3c_ids, +}; +module_i3c_driver(st_lsm6dsx_driver); + +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>"); +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver"); +MODULE_LICENSE("GPL v2");
For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in spi and i2c mode. The LSM6DSO and LSM6DSR are also i3c capable so lets give i3c support to them. Signed-off-by: Vitor Soares <vitor.soares@synopsys.com> --- Changes in v2: Add support for LSM6DSR Set pm_ops to st_lsm6dsx_pm_ops drivers/iio/imu/st_lsm6dsx/Kconfig | 8 ++- drivers/iio/imu/st_lsm6dsx/Makefile | 1 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 76 +++++++++++++++++++++++++++++ 3 files changed, 84 insertions(+), 1 deletion(-) create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c