| Message ID | 20190608105619.593-1-wsa+renesas@sang-engineering.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | treewide: simplify getting the adapter of an I2C client | expand |
Hi Peter, > Similar things go on in: > > drivers/hwmon/lm90.c > drivers/leds/leds-is31fl319x.c > drivers/of/unittest.c Right. I'll fix them, too. > And drivers/rtc/rtc-fm3130.c has a couple of these: These are fixed in patch 26 of this series. Thanks and happy hacking, Wolfram
Hi, On Sat, Jun 08, 2019 at 12:55:39PM +0200, Wolfram Sang wrote: > While preparing a refactoring series, I noticed that some drivers use a > complicated way of determining the adapter of a client. The easy way is > to use the intended pointer: client->adapter > > These drivers do: > to_i2c_adapter(client->dev.parent); > > The I2C core populates the parent pointer as: > client->dev.parent = &client->adapter->dev; > > Now take into consideration that > to_i2c_adapter(&adapter->dev); > > is a complicated way of saying 'adapter', then we can even formally > prove that the complicated expression can be simplified by using > client->adapter. > > The conversion was done using a coccinelle script with some manual > indentation fixes applied on top. > > To avoid a brown paper bag mistake, I double checked this on a Renesas > Salvator-XS board (R-Car M3N) and verified both expression result in the > same pointer. Other than that, the series is only build tested. > > A branch can be found here: > > git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/no_to_adapter > > Please apply the patches to the individual subsystem trees. There are no > dependencies. > > Thanks and kind regards, > > Wolfram Thanks, I queued the patches prefixed with "power: supply: [...]". -- Sebastian > Wolfram Sang (34): > clk: clk-cdce706: simplify getting the adapter of a client > gpu: drm: bridge: sii9234: simplify getting the adapter of a client > iio: light: bh1780: simplify getting the adapter of a client > leds: leds-pca955x: simplify getting the adapter of a client > leds: leds-tca6507: simplify getting the adapter of a client > media: i2c: ak881x: simplify getting the adapter of a client > media: i2c: mt9m001: simplify getting the adapter of a client > media: i2c: mt9m111: simplify getting the adapter of a client > media: i2c: mt9p031: simplify getting the adapter of a client > media: i2c: ov2640: simplify getting the adapter of a client > media: i2c: tw9910: simplify getting the adapter of a client > misc: fsa9480: simplify getting the adapter of a client > misc: isl29003: simplify getting the adapter of a client > misc: tsl2550: simplify getting the adapter of a client > mtd: maps: pismo: simplify getting the adapter of a client > power: supply: bq24190_charger: simplify getting the adapter of a client > power: supply: bq24257_charger: simplify getting the adapter of a client > power: supply: bq25890_charger: simplify getting the adapter of a client > power: supply: max14656_charger_detector: simplify getting the adapter > of a client > power: supply: max17040_battery: simplify getting the adapter of a client > power: supply: max17042_battery: simplify getting the adapter of a client > power: supply: rt5033_battery: simplify getting the adapter of a client > power: supply: rt9455_charger: simplify getting the adapter of a client > power: supply: sbs-manager: simplify getting the adapter of a client > regulator: max8952: simplify getting the adapter of a client > rtc: fm3130: simplify getting the adapter of a client > rtc: m41t80: simplify getting the adapter of a client > rtc: rv8803: simplify getting the adapter of a client > rtc: rx8010: simplify getting the adapter of a client > rtc: rx8025: simplify getting the adapter of a client > staging: media: soc_camera: imx074: simplify getting the adapter of a client > staging: media: soc_camera: mt9t031: simplify getting the adapter of a client > staging: media: soc_camera: soc_mt9v022: simplify getting the adapter > of a client > usb: typec: tcpm: fusb302: simplify getting the adapter of a client > > drivers/clk/clk-cdce706.c | 2 +- > drivers/gpu/drm/bridge/sii9234.c | 4 ++-- > drivers/iio/light/bh1780.c | 2 +- > drivers/leds/leds-pca955x.c | 2 +- > drivers/leds/leds-tca6507.c | 2 +- > drivers/media/i2c/ak881x.c | 2 +- > drivers/media/i2c/mt9m001.c | 2 +- > drivers/media/i2c/mt9m111.c | 2 +- > drivers/media/i2c/mt9p031.c | 2 +- > drivers/media/i2c/ov2640.c | 2 +- > drivers/media/i2c/tw9910.c | 3 +-- > drivers/misc/fsa9480.c | 2 +- > drivers/misc/isl29003.c | 2 +- > drivers/misc/tsl2550.c | 2 +- > drivers/mtd/maps/pismo.c | 2 +- > drivers/power/supply/bq24190_charger.c | 2 +- > drivers/power/supply/bq24257_charger.c | 2 +- > drivers/power/supply/bq25890_charger.c | 2 +- > drivers/power/supply/max14656_charger_detector.c | 2 +- > drivers/power/supply/max17040_battery.c | 2 +- > drivers/power/supply/max17042_battery.c | 2 +- > drivers/power/supply/rt5033_battery.c | 2 +- > drivers/power/supply/rt9455_charger.c | 2 +- > drivers/power/supply/sbs-manager.c | 2 +- > drivers/regulator/max8952.c | 2 +- > drivers/rtc/rtc-fm3130.c | 8 +++----- > drivers/rtc/rtc-m41t80.c | 2 +- > drivers/rtc/rtc-rv8803.c | 2 +- > drivers/rtc/rtc-rx8010.c | 2 +- > drivers/rtc/rtc-rx8025.c | 2 +- > drivers/staging/media/soc_camera/imx074.c | 2 +- > drivers/staging/media/soc_camera/mt9t031.c | 2 +- > drivers/staging/media/soc_camera/soc_mt9v022.c | 2 +- > drivers/usb/typec/tcpm/fusb302.c | 3 +-- > 34 files changed, 37 insertions(+), 41 deletions(-) > > -- > 2.19.1 >
While preparing a refactoring series, I noticed that some drivers use a complicated way of determining the adapter of a client. The easy way is to use the intended pointer: client->adapter These drivers do: to_i2c_adapter(client->dev.parent); The I2C core populates the parent pointer as: client->dev.parent = &client->adapter->dev; Now take into consideration that to_i2c_adapter(&adapter->dev); is a complicated way of saying 'adapter', then we can even formally prove that the complicated expression can be simplified by using client->adapter. The conversion was done using a coccinelle script with some manual indentation fixes applied on top. To avoid a brown paper bag mistake, I double checked this on a Renesas Salvator-XS board (R-Car M3N) and verified both expression result in the same pointer. Other than that, the series is only build tested. A branch can be found here: git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/no_to_adapter Please apply the patches to the individual subsystem trees. There are no dependencies. Thanks and kind regards, Wolfram Wolfram Sang (34): clk: clk-cdce706: simplify getting the adapter of a client gpu: drm: bridge: sii9234: simplify getting the adapter of a client iio: light: bh1780: simplify getting the adapter of a client leds: leds-pca955x: simplify getting the adapter of a client leds: leds-tca6507: simplify getting the adapter of a client media: i2c: ak881x: simplify getting the adapter of a client media: i2c: mt9m001: simplify getting the adapter of a client media: i2c: mt9m111: simplify getting the adapter of a client media: i2c: mt9p031: simplify getting the adapter of a client media: i2c: ov2640: simplify getting the adapter of a client media: i2c: tw9910: simplify getting the adapter of a client misc: fsa9480: simplify getting the adapter of a client misc: isl29003: simplify getting the adapter of a client misc: tsl2550: simplify getting the adapter of a client mtd: maps: pismo: simplify getting the adapter of a client power: supply: bq24190_charger: simplify getting the adapter of a client power: supply: bq24257_charger: simplify getting the adapter of a client power: supply: bq25890_charger: simplify getting the adapter of a client power: supply: max14656_charger_detector: simplify getting the adapter of a client power: supply: max17040_battery: simplify getting the adapter of a client power: supply: max17042_battery: simplify getting the adapter of a client power: supply: rt5033_battery: simplify getting the adapter of a client power: supply: rt9455_charger: simplify getting the adapter of a client power: supply: sbs-manager: simplify getting the adapter of a client regulator: max8952: simplify getting the adapter of a client rtc: fm3130: simplify getting the adapter of a client rtc: m41t80: simplify getting the adapter of a client rtc: rv8803: simplify getting the adapter of a client rtc: rx8010: simplify getting the adapter of a client rtc: rx8025: simplify getting the adapter of a client staging: media: soc_camera: imx074: simplify getting the adapter of a client staging: media: soc_camera: mt9t031: simplify getting the adapter of a client staging: media: soc_camera: soc_mt9v022: simplify getting the adapter of a client usb: typec: tcpm: fusb302: simplify getting the adapter of a client drivers/clk/clk-cdce706.c | 2 +- drivers/gpu/drm/bridge/sii9234.c | 4 ++-- drivers/iio/light/bh1780.c | 2 +- drivers/leds/leds-pca955x.c | 2 +- drivers/leds/leds-tca6507.c | 2 +- drivers/media/i2c/ak881x.c | 2 +- drivers/media/i2c/mt9m001.c | 2 +- drivers/media/i2c/mt9m111.c | 2 +- drivers/media/i2c/mt9p031.c | 2 +- drivers/media/i2c/ov2640.c | 2 +- drivers/media/i2c/tw9910.c | 3 +-- drivers/misc/fsa9480.c | 2 +- drivers/misc/isl29003.c | 2 +- drivers/misc/tsl2550.c | 2 +- drivers/mtd/maps/pismo.c | 2 +- drivers/power/supply/bq24190_charger.c | 2 +- drivers/power/supply/bq24257_charger.c | 2 +- drivers/power/supply/bq25890_charger.c | 2 +- drivers/power/supply/max14656_charger_detector.c | 2 +- drivers/power/supply/max17040_battery.c | 2 +- drivers/power/supply/max17042_battery.c | 2 +- drivers/power/supply/rt5033_battery.c | 2 +- drivers/power/supply/rt9455_charger.c | 2 +- drivers/power/supply/sbs-manager.c | 2 +- drivers/regulator/max8952.c | 2 +- drivers/rtc/rtc-fm3130.c | 8 +++----- drivers/rtc/rtc-m41t80.c | 2 +- drivers/rtc/rtc-rv8803.c | 2 +- drivers/rtc/rtc-rx8010.c | 2 +- drivers/rtc/rtc-rx8025.c | 2 +- drivers/staging/media/soc_camera/imx074.c | 2 +- drivers/staging/media/soc_camera/mt9t031.c | 2 +- drivers/staging/media/soc_camera/soc_mt9v022.c | 2 +- drivers/usb/typec/tcpm/fusb302.c | 3 +-- 34 files changed, 37 insertions(+), 41 deletions(-)