| Message ID | bc0803209a42b1e1c1e33281b16cd6fa4a4556b3.1560514379.git-series.maxime.ripard@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/vc4: Allow for more boot-time configuration | expand |
Den 14.06.2019 14.13, skrev Maxime Ripard: > Rotations and reflections setup are needed in some scenarios to initialise > properly the initial framebuffer. Some drivers already had a bunch of > quirks to deal with this, such as either a private kernel command line > parameter (omapdss) or on the device tree (various panels). > > In order to accomodate this, let's create a video mode parameter to deal > with the rotation and reflexion. > This needs to be documented in Documentation/fb/modedb.txt > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> > --- > drivers/gpu/drm/drm_client_modeset.c | 20 +++++- > drivers/gpu/drm/drm_modes.c | 110 ++++++++++++++++++++++------ > include/drm/drm_connector.h | 9 ++- > 3 files changed, 119 insertions(+), 20 deletions(-) > > diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c > index 33d4988f22ae..57937e38492c 100644 > --- a/drivers/gpu/drm/drm_client_modeset.c > +++ b/drivers/gpu/drm/drm_client_modeset.c > @@ -824,6 +824,7 @@ bool drm_client_rotation(struct drm_mode_set *modeset, unsigned int *rotation) > { > struct drm_connector *connector = modeset->connectors[0]; > struct drm_plane *plane = modeset->crtc->primary; > + struct drm_cmdline_mode *cmdline; > u64 valid_mask = 0; > unsigned int i; > > @@ -844,6 +845,25 @@ bool drm_client_rotation(struct drm_mode_set *modeset, unsigned int *rotation) > *rotation = DRM_MODE_ROTATE_0; > } > > + /** > + * The panel already defined the default rotation > + * through its orientation. Whatever has been provided > + * on the command line needs to be added to that. > + * > + * Unfortunately, the rotations are at different bit > + * indices, so the math to add them up are not as > + * trivial as they could. > + */ > + cmdline = &connector->cmdline_mode; > + if (cmdline->specified) { > + unsigned int panel_rot = ilog2(*rotation & DRM_MODE_ROTATE_MASK); > + unsigned int cmdline_rot = ilog2(cmdline->rotation & DRM_MODE_ROTATE_MASK); > + unsigned int sum_rot; > + > + sum_rot = (panel_rot + cmdline_rot) % 4; > + *rotation = 1 << sum_rot; > + } Looks like reflect_* will be thrown away here? > + > /* > * TODO: support 90 / 270 degree hardware rotation, > * depending on the hardware this may require the framebuffer > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c > index 429d3be17800..b92b7df6784a 100644 > --- a/drivers/gpu/drm/drm_modes.c > +++ b/drivers/gpu/drm/drm_modes.c > @@ -1554,6 +1554,71 @@ static int drm_mode_parse_cmdline_res_mode(const char *str, unsigned int length, > return 0; > } > > +static int drm_mode_parse_cmdline_options(char *str, size_t len, > + struct drm_connector *connector, > + struct drm_cmdline_mode *mode) > +{ > + unsigned int rotation = 0; > + char *sep = str; > + > + while ((sep = strchr(sep, ','))) { > + char *delim, *option; > + > + option = sep + 1; > + delim = strchr(option, '='); > + if (!delim) { > + delim = strchr(option, ','); > + > + if (!delim) > + delim = str + len; > + } > + > + if (!strncmp(option, "rotate", delim - option)) { > + const char *value = delim + 1; > + unsigned int deg; > + > + deg = simple_strtol(value, &sep, 10); > + > + /* Make sure we have parsed something */ > + if (sep == value) > + return -EINVAL; > + > + switch (deg) { > + case 0: > + rotation |= DRM_MODE_ROTATE_0; > + break; > + > + case 90: > + rotation |= DRM_MODE_ROTATE_90; > + break; > + > + case 180: > + rotation |= DRM_MODE_ROTATE_180; > + break; > + > + case 270: > + rotation |= DRM_MODE_ROTATE_270; > + break; > + > + default: > + return -EINVAL; > + } > + } else if (!strncmp(option, "reflect_x", delim - option)) { > + rotation |= DRM_MODE_REFLECT_X; > + sep = delim; > + } else if (!strncmp(option, "reflect_y", delim - option)) { > + rotation |= DRM_MODE_REFLECT_Y; > + sep = delim; > + } else { > + return -EINVAL; > + } > + } > + > + mode->rotation = rotation; > + > + return 0; > +} > + > /** > * drm_mode_parse_command_line_for_connector - parse command line modeline for connector > * @mode_option: optional per connector mode option > @@ -1581,9 +1646,10 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option, > { > const char *name; > bool named_mode = false, parse_extras = false; > - unsigned int bpp_off = 0, refresh_off = 0; > + unsigned int bpp_off = 0, refresh_off = 0, options_off = 0; > unsigned int mode_end = 0; > char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL; > + char *options_ptr = NULL; > char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL; > int ret; > > @@ -1632,13 +1698,18 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option, > mode->refresh_specified = true; > } > > + /* Locate the start of named options */ > + options_ptr = strchr(name, ','); > + if (options_ptr) > + options_off = options_ptr - name; > + > /* Locate the end of the name / resolution, and parse it */ > - if (bpp_ptr && refresh_ptr) { > - mode_end = min(bpp_off, refresh_off); > - } else if (bpp_ptr) { > + if (bpp_ptr) { > mode_end = bpp_off; > } else if (refresh_ptr) { > mode_end = refresh_off; > + } else if (options_ptr) { > + mode_end = options_off; > } else { > mode_end = strlen(name); > parse_extras = true; > @@ -1680,24 +1751,23 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option, > else if (refresh_ptr) > extra_ptr = refresh_end_ptr; > > - if (extra_ptr) { > - if (!named_mode) { > - int len = strlen(name) - (extra_ptr - name); > + if (extra_ptr && > + extra_ptr != options_ptr) { > + int len = strlen(name) - (extra_ptr - name); > > - ret = drm_mode_parse_cmdline_extra(extra_ptr, len, > - connector, mode); > - if (ret) > - return false; > - } else { > - int remaining = strlen(name) - (extra_ptr - name); > + ret = drm_mode_parse_cmdline_extra(extra_ptr, len, > + connector, mode); > + if (ret) > + return false; > + } > > - /* > - * We still have characters to process, while > - * we shouldn't have any > - */ > - if (remaining > 0) > - return false; > - } > + if (options_ptr) { > + int len = strlen(name) - (options_ptr - name); > + > + ret = drm_mode_parse_cmdline_options(options_ptr, len, > + connector, mode); > + if (ret) > + return false; > } > > return true; > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h > index f46a53e86d75..68a04169ea36 100644 > --- a/include/drm/drm_connector.h > +++ b/include/drm/drm_connector.h > @@ -1006,6 +1006,15 @@ struct drm_cmdline_mode { > * state to one of the DRM_FORCE_* values. > */ > enum drm_connector_force force; > + > + /** > + * @rotation: > + * > + * Initial rotation of the mode setup from the command line. > + * See DRM_MODE_ROTATE_*. Only DRM_MODE_ROTATE_0 and > + * DRM_MODE_ROTATE_180 are supported at the moment. > + */ Reflect is also supported? Noralf. > + unsigned int rotation; > }; > > /** >
diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c index 33d4988f22ae..57937e38492c 100644 --- a/drivers/gpu/drm/drm_client_modeset.c +++ b/drivers/gpu/drm/drm_client_modeset.c @@ -824,6 +824,7 @@ bool drm_client_rotation(struct drm_mode_set *modeset, unsigned int *rotation) { struct drm_connector *connector = modeset->connectors[0]; struct drm_plane *plane = modeset->crtc->primary; + struct drm_cmdline_mode *cmdline; u64 valid_mask = 0; unsigned int i; @@ -844,6 +845,25 @@ bool drm_client_rotation(struct drm_mode_set *modeset, unsigned int *rotation) *rotation = DRM_MODE_ROTATE_0; } + /** + * The panel already defined the default rotation + * through its orientation. Whatever has been provided + * on the command line needs to be added to that. + * + * Unfortunately, the rotations are at different bit + * indices, so the math to add them up are not as + * trivial as they could. + */ + cmdline = &connector->cmdline_mode; + if (cmdline->specified) { + unsigned int panel_rot = ilog2(*rotation & DRM_MODE_ROTATE_MASK); + unsigned int cmdline_rot = ilog2(cmdline->rotation & DRM_MODE_ROTATE_MASK); + unsigned int sum_rot; + + sum_rot = (panel_rot + cmdline_rot) % 4; + *rotation = 1 << sum_rot; + } + /* * TODO: support 90 / 270 degree hardware rotation, * depending on the hardware this may require the framebuffer diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 429d3be17800..b92b7df6784a 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -1554,6 +1554,71 @@ static int drm_mode_parse_cmdline_res_mode(const char *str, unsigned int length, return 0; } +static int drm_mode_parse_cmdline_options(char *str, size_t len, + struct drm_connector *connector, + struct drm_cmdline_mode *mode) +{ + unsigned int rotation = 0; + char *sep = str; + + while ((sep = strchr(sep, ','))) { + char *delim, *option; + + option = sep + 1; + delim = strchr(option, '='); + if (!delim) { + delim = strchr(option, ','); + + if (!delim) + delim = str + len; + } + + if (!strncmp(option, "rotate", delim - option)) { + const char *value = delim + 1; + unsigned int deg; + + deg = simple_strtol(value, &sep, 10); + + /* Make sure we have parsed something */ + if (sep == value) + return -EINVAL; + + switch (deg) { + case 0: + rotation |= DRM_MODE_ROTATE_0; + break; + + case 90: + rotation |= DRM_MODE_ROTATE_90; + break; + + case 180: + rotation |= DRM_MODE_ROTATE_180; + break; + + case 270: + rotation |= DRM_MODE_ROTATE_270; + break; + + default: + return -EINVAL; + } + } else if (!strncmp(option, "reflect_x", delim - option)) { + rotation |= DRM_MODE_REFLECT_X; + sep = delim; + } else if (!strncmp(option, "reflect_y", delim - option)) { + rotation |= DRM_MODE_REFLECT_Y; + sep = delim; + } else { + return -EINVAL; + } + } + + mode->rotation = rotation; + + return 0; +} + /** * drm_mode_parse_command_line_for_connector - parse command line modeline for connector * @mode_option: optional per connector mode option @@ -1581,9 +1646,10 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option, { const char *name; bool named_mode = false, parse_extras = false; - unsigned int bpp_off = 0, refresh_off = 0; + unsigned int bpp_off = 0, refresh_off = 0, options_off = 0; unsigned int mode_end = 0; char *bpp_ptr = NULL, *refresh_ptr = NULL, *extra_ptr = NULL; + char *options_ptr = NULL; char *bpp_end_ptr = NULL, *refresh_end_ptr = NULL; int ret; @@ -1632,13 +1698,18 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option, mode->refresh_specified = true; } + /* Locate the start of named options */ + options_ptr = strchr(name, ','); + if (options_ptr) + options_off = options_ptr - name; + /* Locate the end of the name / resolution, and parse it */ - if (bpp_ptr && refresh_ptr) { - mode_end = min(bpp_off, refresh_off); - } else if (bpp_ptr) { + if (bpp_ptr) { mode_end = bpp_off; } else if (refresh_ptr) { mode_end = refresh_off; + } else if (options_ptr) { + mode_end = options_off; } else { mode_end = strlen(name); parse_extras = true; @@ -1680,24 +1751,23 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option, else if (refresh_ptr) extra_ptr = refresh_end_ptr; - if (extra_ptr) { - if (!named_mode) { - int len = strlen(name) - (extra_ptr - name); + if (extra_ptr && + extra_ptr != options_ptr) { + int len = strlen(name) - (extra_ptr - name); - ret = drm_mode_parse_cmdline_extra(extra_ptr, len, - connector, mode); - if (ret) - return false; - } else { - int remaining = strlen(name) - (extra_ptr - name); + ret = drm_mode_parse_cmdline_extra(extra_ptr, len, + connector, mode); + if (ret) + return false; + } - /* - * We still have characters to process, while - * we shouldn't have any - */ - if (remaining > 0) - return false; - } + if (options_ptr) { + int len = strlen(name) - (options_ptr - name); + + ret = drm_mode_parse_cmdline_options(options_ptr, len, + connector, mode); + if (ret) + return false; } return true; diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index f46a53e86d75..68a04169ea36 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -1006,6 +1006,15 @@ struct drm_cmdline_mode { * state to one of the DRM_FORCE_* values. */ enum drm_connector_force force; + + /** + * @rotation: + * + * Initial rotation of the mode setup from the command line. + * See DRM_MODE_ROTATE_*. Only DRM_MODE_ROTATE_0 and + * DRM_MODE_ROTATE_180 are supported at the moment. + */ + unsigned int rotation; }; /**
Rotations and reflections setup are needed in some scenarios to initialise properly the initial framebuffer. Some drivers already had a bunch of quirks to deal with this, such as either a private kernel command line parameter (omapdss) or on the device tree (various panels). In order to accomodate this, let's create a video mode parameter to deal with the rotation and reflexion. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- drivers/gpu/drm/drm_client_modeset.c | 20 +++++- drivers/gpu/drm/drm_modes.c | 110 ++++++++++++++++++++++------ include/drm/drm_connector.h | 9 ++- 3 files changed, 119 insertions(+), 20 deletions(-)