@@ -9,6 +9,7 @@
#include <linux/input.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <linux/dmi.h>
#include <sound/core.h>
#include <sound/jack.h>
@@ -32,6 +33,7 @@
#define SOF_RT5682_SSP_AMP_MASK (GENMASK(8, 6))
#define SOF_RT5682_SSP_AMP(quirk) \
(((quirk) << SOF_RT5682_SSP_AMP_SHIFT) & SOF_RT5682_SSP_AMP_MASK)
+#define SOF_RT5682_MCLK_BYTCHT_EN BIT(9)
/* Default: MCLK on, MCLK 19.2M, SSP0 */
static unsigned long sof_rt5682_quirk = SOF_RT5682_MCLK_EN |
@@ -48,6 +50,7 @@ struct sof_hdmi_pcm {
};
struct sof_card_private {
+ struct clk *mclk;
struct snd_soc_jack sof_headset;
struct list_head hdmi_pcm_list;
};
@@ -59,6 +62,22 @@ static int sof_rt5682_quirk_cb(const struct dmi_system_id *id)
}
static const struct dmi_system_id sof_rt5682_quirk_table[] = {
+ {
+ .callback = sof_rt5682_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max"),
+ },
+ .driver_data = (void *)(SOF_RT5682_SSP_CODEC(2)),
+ },
+ {
+ .callback = sof_rt5682_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "UP-CHT01"),
+ },
+ .driver_data = (void *)(SOF_RT5682_SSP_CODEC(2)),
+ },
{
.callback = sof_rt5682_quirk_cb,
.matches = {
@@ -127,6 +146,27 @@ static int sof_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
RT5682_CLK_SEL_I2S1_ASRC);
}
+ if (sof_rt5682_quirk & SOF_RT5682_MCLK_BYTCHT_EN) {
+ /*
+ * The firmware might enable the clock at
+ * boot (this information may or may not
+ * be reflected in the enable clock register).
+ * To change the rate we must disable the clock
+ * first to cover these cases. Due to common
+ * clock framework restrictions that do not allow
+ * to disable a clock that has not been enabled,
+ * we need to enable the clock first.
+ */
+ ret = clk_prepare_enable(ctx->mclk);
+ if (!ret)
+ clk_disable_unprepare(ctx->mclk);
+
+ ret = clk_set_rate(ctx->mclk, 19200000);
+
+ if (ret)
+ dev_err(rtd->dev, "unable to set MCLK rate\n");
+ }
+
/*
* Headset buttons map to the google Reference headset.
* These can be configured by userspace.
@@ -161,10 +201,20 @@ static int sof_rt5682_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
struct snd_soc_dai *codec_dai = rtd->codec_dai;
int clk_id, clk_freq, pll_out, ret;
if (sof_rt5682_quirk & SOF_RT5682_MCLK_EN) {
+ if (sof_rt5682_quirk & SOF_RT5682_MCLK_BYTCHT_EN) {
+ ret = clk_prepare_enable(ctx->mclk);
+ if (ret < 0) {
+ dev_err(rtd->dev,
+ "could not configure MCLK state");
+ return ret;
+ }
+ }
+
clk_id = RT5682_PLL1_S_MCLK;
if (sof_rt5682_quirk & SOF_RT5682_MCLK_24MHZ)
clk_freq = 24000000;
@@ -507,7 +557,9 @@ static int sof_audio_probe(struct platform_device *pdev)
dmic_num = 0;
hdmi_num = 0;
/* default quirk for legacy cpu */
- sof_rt5682_quirk = SOF_RT5682_SSP_CODEC(2);
+ sof_rt5682_quirk = SOF_RT5682_MCLK_EN |
+ SOF_RT5682_MCLK_BYTCHT_EN |
+ SOF_RT5682_SSP_CODEC(2);
} else {
dmic_num = 1;
hdmi_num = 3;
@@ -515,6 +567,17 @@ static int sof_audio_probe(struct platform_device *pdev)
dmi_check_system(sof_rt5682_quirk_table);
+ /* need to get main clock from pmc */
+ if (sof_rt5682_quirk & SOF_RT5682_MCLK_BYTCHT_EN) {
+ ctx->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+ ret = clk_prepare_enable(ctx->mclk);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "could not configure MCLK state");
+ return ret;
+ }
+ }
+
dev_dbg(&pdev->dev, "sof_rt5682_quirk = %lx\n", sof_rt5682_quirk);
ssp_amp = (sof_rt5682_quirk & SOF_RT5682_SSP_AMP_MASK) >>