| Message ID | 20190616132930.6942-3-masneyb@onstation.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | qcom: add OCMEM support | expand |
On Sun, Jun 16, 2019 at 09:29:26AM -0400, Brian Masney wrote: > Some A3xx and A4xx Adreno GPUs do not have GMEM inside the GPU core and > must use the On Chip MEMory (OCMEM) in order to be functional. Add the > optional ocmem property to the Adreno Graphics Management Unit bindings. > > Signed-off-by: Brian Masney <masneyb@onstation.org> > --- > Documentation/devicetree/bindings/display/msm/gmu.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt > index 90af5b0a56a9..c746b95e95d4 100644 > --- a/Documentation/devicetree/bindings/display/msm/gmu.txt > +++ b/Documentation/devicetree/bindings/display/msm/gmu.txt > @@ -31,6 +31,10 @@ Required properties: > - iommus: phandle to the adreno iommu > - operating-points-v2: phandle to the OPP operating points > > +Optional properties: > +- ocmem: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon > + SoCs. See Documentation/devicetree/bindings/soc/qcom/qcom,ocmem.yaml. > + > Example: You should add a full-fledged a4xx example here including a ocmem phandle. Jordan > / {
On Sun, Jun 16, 2019 at 7:29 AM Brian Masney <masneyb@onstation.org> wrote: > > Some A3xx and A4xx Adreno GPUs do not have GMEM inside the GPU core and > must use the On Chip MEMory (OCMEM) in order to be functional. Add the > optional ocmem property to the Adreno Graphics Management Unit bindings. > > Signed-off-by: Brian Masney <masneyb@onstation.org> > --- > Documentation/devicetree/bindings/display/msm/gmu.txt | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt > index 90af5b0a56a9..c746b95e95d4 100644 > --- a/Documentation/devicetree/bindings/display/msm/gmu.txt > +++ b/Documentation/devicetree/bindings/display/msm/gmu.txt > @@ -31,6 +31,10 @@ Required properties: > - iommus: phandle to the adreno iommu > - operating-points-v2: phandle to the OPP operating points > > +Optional properties: > +- ocmem: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon > + SoCs. See Documentation/devicetree/bindings/soc/qcom/qcom,ocmem.yaml. We already have a couple of similar properties. Lets standardize on 'sram' as that is what TI already uses. Also, is the whole OCMEM allocated to the GMU? If not you should have child nodes to subdivide the memory. Rob
On Wed, Jun 19, 2019 at 1:17 PM Rob Herring <robh+dt@kernel.org> wrote: > > On Sun, Jun 16, 2019 at 7:29 AM Brian Masney <masneyb@onstation.org> wrote: > > > > Some A3xx and A4xx Adreno GPUs do not have GMEM inside the GPU core and > > must use the On Chip MEMory (OCMEM) in order to be functional. Add the > > optional ocmem property to the Adreno Graphics Management Unit bindings. > > > > Signed-off-by: Brian Masney <masneyb@onstation.org> > > --- > > Documentation/devicetree/bindings/display/msm/gmu.txt | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt > > index 90af5b0a56a9..c746b95e95d4 100644 > > --- a/Documentation/devicetree/bindings/display/msm/gmu.txt > > +++ b/Documentation/devicetree/bindings/display/msm/gmu.txt > > @@ -31,6 +31,10 @@ Required properties: > > - iommus: phandle to the adreno iommu > > - operating-points-v2: phandle to the OPP operating points > > > > +Optional properties: > > +- ocmem: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon > > + SoCs. See Documentation/devicetree/bindings/soc/qcom/qcom,ocmem.yaml. > > We already have a couple of similar properties. Lets standardize on > 'sram' as that is what TI already uses. > > Also, is the whole OCMEM allocated to the GMU? If not you should have > child nodes to subdivide the memory. > iirc, downstream a large chunk of OCMEM is statically allocated for GPU.. the remainder is dynamically allocated for different use-cases. The upstream driver Brian is proposing only handles the static allocation case (and I don't think we have upstream support for the various audio and video use-cases that used dynamic OCMEM allocation downstream) Although maybe we should still have a child node to separate the statically and dynamically allocated parts? I'm not sure what would make the most sense.. BR, -R
On Wed, Jun 19, 2019 at 01:21:20PM -0700, Rob Clark wrote: > On Wed, Jun 19, 2019 at 1:17 PM Rob Herring <robh+dt@kernel.org> wrote: > > > > On Sun, Jun 16, 2019 at 7:29 AM Brian Masney <masneyb@onstation.org> wrote: > > > > > > Some A3xx and A4xx Adreno GPUs do not have GMEM inside the GPU core and > > > must use the On Chip MEMory (OCMEM) in order to be functional. Add the > > > optional ocmem property to the Adreno Graphics Management Unit bindings. > > > > > > Signed-off-by: Brian Masney <masneyb@onstation.org> > > > --- > > > Documentation/devicetree/bindings/display/msm/gmu.txt | 4 ++++ > > > 1 file changed, 4 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt > > > index 90af5b0a56a9..c746b95e95d4 100644 > > > --- a/Documentation/devicetree/bindings/display/msm/gmu.txt > > > +++ b/Documentation/devicetree/bindings/display/msm/gmu.txt > > > @@ -31,6 +31,10 @@ Required properties: > > > - iommus: phandle to the adreno iommu > > > - operating-points-v2: phandle to the OPP operating points > > > > > > +Optional properties: > > > +- ocmem: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon > > > + SoCs. See Documentation/devicetree/bindings/soc/qcom/qcom,ocmem.yaml. > > > > We already have a couple of similar properties. Lets standardize on > > 'sram' as that is what TI already uses. > > > > Also, is the whole OCMEM allocated to the GMU? If not you should have > > child nodes to subdivide the memory. > > > > iirc, downstream a large chunk of OCMEM is statically allocated for > GPU.. the remainder is dynamically allocated for different use-cases. > The upstream driver Brian is proposing only handles the static > allocation case It appears that the GPU expects to use a specific region of ocmem, specifically starting at 0. The freedreno driver allocates 1MB of ocmem on the Nexus 5 starting at ocmem address 0. As a test, I changed the starting address to 0.5MB and kmscube shows only half the cube, and four wide black bars across the screen: https://www.flickr.com/photos/masneyb/48100534381/ > (and I don't think we have upstream support for the various audio and > video use-cases that used dynamic OCMEM allocation downstream) That's my understanding as well. > Although maybe we should still have a child node to separate the > statically and dynamically allocated parts? I'm not sure what would > make the most sense.. Given that the GPU is expecting a fixed address in ocmem, perhaps it makes sense to have the child node. How about this based on the sram/sram.txt bindings? ocmem: ocmem@fdd00000 { compatible = "qcom,msm8974-ocmem"; reg = <0xfdd00000 0x2000>, <0xfec00000 0x180000>; reg-names = "ctrl", "mem"; clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, <&mmcc OCMEMCX_OCMEMNOC_CLK>; clock-names = "core", "iface"; gmu-sram@0 { reg = <0x0 0x100000>; pool; }; misc-sram@0 { reg = <0x100000 0x080000>; export; }; }; I marked the misc pool as export since I've seen in the downstream ocmem sources a reference to their closed libsensors that runs in userspace. Looking at the sram bindings led me to the genalloc API (Documentation/core-api/genalloc.rst). I wonder if this is the way that this should be done? Brian
On Thu, Jun 20, 2019 at 7:14 PM Brian Masney <masneyb@onstation.org> wrote: > > On Wed, Jun 19, 2019 at 01:21:20PM -0700, Rob Clark wrote: > > On Wed, Jun 19, 2019 at 1:17 PM Rob Herring <robh+dt@kernel.org> wrote: > > > > > > On Sun, Jun 16, 2019 at 7:29 AM Brian Masney <masneyb@onstation.org> wrote: > > > > > > > > Some A3xx and A4xx Adreno GPUs do not have GMEM inside the GPU core and > > > > must use the On Chip MEMory (OCMEM) in order to be functional. Add the > > > > optional ocmem property to the Adreno Graphics Management Unit bindings. > > > > > > > > Signed-off-by: Brian Masney <masneyb@onstation.org> > > > > --- > > > > Documentation/devicetree/bindings/display/msm/gmu.txt | 4 ++++ > > > > 1 file changed, 4 insertions(+) > > > > > > > > diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt > > > > index 90af5b0a56a9..c746b95e95d4 100644 > > > > --- a/Documentation/devicetree/bindings/display/msm/gmu.txt > > > > +++ b/Documentation/devicetree/bindings/display/msm/gmu.txt > > > > @@ -31,6 +31,10 @@ Required properties: > > > > - iommus: phandle to the adreno iommu > > > > - operating-points-v2: phandle to the OPP operating points > > > > > > > > +Optional properties: > > > > +- ocmem: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon > > > > + SoCs. See Documentation/devicetree/bindings/soc/qcom/qcom,ocmem.yaml. > > > > > > We already have a couple of similar properties. Lets standardize on > > > 'sram' as that is what TI already uses. > > > > > > Also, is the whole OCMEM allocated to the GMU? If not you should have > > > child nodes to subdivide the memory. > > > > > > > iirc, downstream a large chunk of OCMEM is statically allocated for > > GPU.. the remainder is dynamically allocated for different use-cases. > > The upstream driver Brian is proposing only handles the static > > allocation case > > It appears that the GPU expects to use a specific region of ocmem, > specifically starting at 0. The freedreno driver allocates 1MB of > ocmem on the Nexus 5 starting at ocmem address 0. As a test, I > changed the starting address to 0.5MB and kmscube shows only half the > cube, and four wide black bars across the screen: > > https://www.flickr.com/photos/masneyb/48100534381/ > > > (and I don't think we have upstream support for the various audio and > > video use-cases that used dynamic OCMEM allocation downstream) > > That's my understanding as well. > > > Although maybe we should still have a child node to separate the > > statically and dynamically allocated parts? I'm not sure what would > > make the most sense.. > > Given that the GPU is expecting a fixed address in ocmem, perhaps it > makes sense to have the child node. How about this based on the > sram/sram.txt bindings? > > ocmem: ocmem@fdd00000 { > compatible = "qcom,msm8974-ocmem"; > > reg = <0xfdd00000 0x2000>, <0xfec00000 0x180000>; > reg-names = "ctrl", "mem"; > > clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, <&mmcc OCMEMCX_OCMEMNOC_CLK>; > clock-names = "core", "iface"; > > gmu-sram@0 { > reg = <0x0 0x100000>; > pool; > }; > > misc-sram@0 { > reg = <0x100000 0x080000>; > export; > }; > }; > > I marked the misc pool as export since I've seen in the downstream ocmem > sources a reference to their closed libsensors that runs in userspace. > > Looking at the sram bindings led me to the genalloc API > (Documentation/core-api/genalloc.rst). I wonder if this is the way that > this should be done? won't claim to be a dt expert, but this seems somewhat sane.. maybe drop the export until a use-case comes along for that.. or even the entire second child node? I guess that comes down to what robher and others prefer, I can't really speculate too much about the non-gpu use-cases for ocmem (or if they'll ever be upstream) BR, -R
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.txt b/Documentation/devicetree/bindings/display/msm/gmu.txt index 90af5b0a56a9..c746b95e95d4 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.txt +++ b/Documentation/devicetree/bindings/display/msm/gmu.txt @@ -31,6 +31,10 @@ Required properties: - iommus: phandle to the adreno iommu - operating-points-v2: phandle to the OPP operating points +Optional properties: +- ocmem: phandle to the On Chip Memory (OCMEM) that's present on some Snapdragon + SoCs. See Documentation/devicetree/bindings/soc/qcom/qcom,ocmem.yaml. + Example: / {
Some A3xx and A4xx Adreno GPUs do not have GMEM inside the GPU core and must use the On Chip MEMory (OCMEM) in order to be functional. Add the optional ocmem property to the Adreno Graphics Management Unit bindings. Signed-off-by: Brian Masney <masneyb@onstation.org> --- Documentation/devicetree/bindings/display/msm/gmu.txt | 4 ++++ 1 file changed, 4 insertions(+)