| Message ID | 20190623164206.7467-11-tiny.windzz@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | add thermal driver for h6 | expand |
On Sun, Jun 23, 2019 at 12:42:05PM -0400, Yangtao Li wrote: > This patch adds binding document for allwinner h3 thermal controller. > > Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> > --- > .../bindings/thermal/sun8i-thermal.yaml | 29 +++++++++++++++++-- > 1 file changed, 26 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml > index 2c5acc61ed03..1eaf68b5dd5a 100644 > --- a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml > +++ b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml > @@ -16,6 +16,7 @@ description: |- > properties: > compatible: > enum: > + - allwinner,sun8i-h3-ths > - allwinner,sun50i-h6-ths > > reg: > @@ -29,13 +30,22 @@ properties: > > clocks: > minItems: 1 > - maxItems: 1 > + maxItems: 2 > > clock-names: > - const: bus > + items: > + - const: bus > + - const: ahb You need a min/maxItems here as well. Otherwise, on the H6, you will have a warning since you asked for an array of two items, bus and ahb, while you only have a single one. > '#thermal-sensor-cells': > - const: 1 > + enum: [ 0, 1 ] > + description: | > + Definition depends on soc version: > + > + For "allwinner,sun8i-h3-ths", > + value must be 0. > + For "allwinner,sun50i-h6-ths", > + value must be 1. This must be checked using a conditional. Something like: if: properties: compatible: const: allwinner,sun8i-h3-ths then: properties: "#thermal-sensor-cells": const: 0 else: properties: "#thermal-sensor-cells": const: 1 > nvmem-cells: > items: > @@ -55,6 +65,19 @@ required: > - '#thermal-sensor-cells' > > examples: > + - | > + ths: ths@1c25000 { > + compatible = "allwinner,sun8i-h3-ths"; > + reg = <0x01c25000 0x400>; > + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; > + clock-names = "bus", "ahb"; > + resets = <&ccu RST_BUS_THS>; > + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; > + nvmem-cells = <&tsen_calib>; > + nvmem-cell-names = "calib"; > + #thermal-sensor-cells = <0>; > + }; Same remark here, it won't compile Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
diff --git a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml index 2c5acc61ed03..1eaf68b5dd5a 100644 --- a/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml @@ -16,6 +16,7 @@ description: |- properties: compatible: enum: + - allwinner,sun8i-h3-ths - allwinner,sun50i-h6-ths reg: @@ -29,13 +30,22 @@ properties: clocks: minItems: 1 - maxItems: 1 + maxItems: 2 clock-names: - const: bus + items: + - const: bus + - const: ahb '#thermal-sensor-cells': - const: 1 + enum: [ 0, 1 ] + description: | + Definition depends on soc version: + + For "allwinner,sun8i-h3-ths", + value must be 0. + For "allwinner,sun50i-h6-ths", + value must be 1. nvmem-cells: items: @@ -55,6 +65,19 @@ required: - '#thermal-sensor-cells' examples: + - | + ths: ths@1c25000 { + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x400>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "ahb"; + resets = <&ccu RST_BUS_THS>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + nvmem-cells = <&tsen_calib>; + nvmem-cell-names = "calib"; + #thermal-sensor-cells = <0>; + }; + - | ths: ths@5070400 { compatible = "allwinner,sun50i-h6-ths";
This patch adds binding document for allwinner h3 thermal controller. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> --- .../bindings/thermal/sun8i-thermal.yaml | 29 +++++++++++++++++-- 1 file changed, 26 insertions(+), 3 deletions(-)