@@ -83,6 +83,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = true,
},
{
.id = QCA988X_HW_2_0_VERSION,
@@ -117,6 +118,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = true,
},
{
.id = QCA9887_HW_1_0_VERSION,
@@ -152,6 +154,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = false,
},
{
.id = QCA6174_HW_3_2_VERSION,
@@ -179,6 +182,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.ast_skid_limit = 0x10,
.num_wds_entries = 0x20,
.uart_pin_workaround = true,
+ .tx_stats_over_pktlog = false,
},
{
.id = QCA6174_HW_2_1_VERSION,
@@ -213,6 +217,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = false,
},
{
.id = QCA6174_HW_2_1_VERSION,
@@ -247,6 +252,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = false,
},
{
.id = QCA6174_HW_3_0_VERSION,
@@ -281,6 +287,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = false,
},
{
.id = QCA6174_HW_3_2_VERSION,
@@ -318,6 +325,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = true,
+ .tx_stats_over_pktlog = false,
},
{
.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -358,6 +366,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = false,
},
{
.id = QCA9984_HW_1_0_DEV_VERSION,
@@ -405,6 +414,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = false,
},
{
.id = QCA9888_HW_2_0_DEV_VERSION,
@@ -449,6 +459,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = false,
},
{
.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -483,6 +494,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = false,
},
{
.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -519,6 +531,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = true,
+ .tx_stats_over_pktlog = false,
},
{
.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -560,6 +573,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = false,
.hw_filter_reset_required = true,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = false,
},
{
.id = WCN3990_HW_1_0_DEV_VERSION,
@@ -587,6 +601,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.rri_on_ddr = true,
.hw_filter_reset_required = false,
.fw_diag_ce_download = false,
+ .tx_stats_over_pktlog = false,
},
};
@@ -612,6 +612,9 @@ struct ath10k_hw_params {
* firmware bug
*/
bool uart_pin_workaround;
+
+ /* tx stats support over pktlog */
+ bool tx_stats_over_pktlog;
};
struct htt_rx_desc;
@@ -7877,7 +7877,8 @@ ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
arvif->vdev_id, ret);
}
- if (ath10k_peer_stats_enabled(ar)) {
+ if (ath10k_peer_stats_enabled(ar) &&
+ ar->hw_params.tx_stats_over_pktlog) {
ar->pktlog_filter |= ATH10K_PKTLOG_PEER_STATS;
ret = ath10k_wmi_pdev_pktlog_enable(ar,
ar->pktlog_filter);
For QCA988X target, pktlog gives details of the tx bitrate which is used in the driver for station info. Enabling pktlog by default will cause more interrupts in target to host CE pipe, which can impact more CPU usage for targets ex:WCN3990 and also not required for all other platforms (eg: WCN3990), for getting tx bitrate. Enable pktlog only for QCA988X based on hardware params. Tested HW : WCN3990 Tested FW : WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: e8123bb74c4e ("ath10k: add per peer tx stats support for 10.2.4") Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.c | 15 +++++++++++++++ drivers/net/wireless/ath/ath10k/hw.h | 3 +++ drivers/net/wireless/ath/ath10k/mac.c | 3 ++- 3 files changed, 20 insertions(+), 1 deletion(-)