deleted file mode 100644
@@ -1,75 +0,0 @@
-Analog Devices AD7124 ADC device driver
-
-Required properties for the AD7124:
- - compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8"
- - reg: SPI chip select number for the device
- - spi-max-frequency: Max SPI frequency to use
- see: Documentation/devicetree/bindings/spi/spi-bus.txt
- - clocks: phandle to the master clock (mclk)
- see: Documentation/devicetree/bindings/clock/clock-bindings.txt
- - clock-names: Must be "mclk".
- - interrupts: IRQ line for the ADC
- see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
- Required properties:
- * #address-cells: Must be 1.
- * #size-cells: Must be 0.
-
- Subnode(s) represent the external channels which are connected to the ADC.
- Each subnode represents one channel and has the following properties:
- Required properties:
- * reg: The channel number. It can have up to 4 channels on ad7124-4
- and 8 channels on ad7124-8, numbered from 0 to 15.
- * diff-channels: see: Documentation/devicetree/bindings/iio/adc/adc.txt
-
- Optional properties:
- * bipolar: see: Documentation/devicetree/bindings/iio/adc/adc.txt
- * adi,reference-select: Select the reference source to use when
- converting on the the specific channel. Valid values are:
- 0: REFIN1(+)/REFIN1(−).
- 1: REFIN2(+)/REFIN2(−).
- 3: AVDD
- If this field is left empty, internal reference is selected.
-
-Optional properties:
- - refin1-supply: refin1 supply can be used as reference for conversion.
- - refin2-supply: refin2 supply can be used as reference for conversion.
- - avdd-supply: avdd supply can be used as reference for conversion.
-
-Example:
- adc@0 {
- compatible = "adi,ad7124-4";
- reg = <0>;
- spi-max-frequency = <5000000>;
- interrupts = <25 2>;
- interrupt-parent = <&gpio>;
- refin1-supply = <&adc_vref>;
- clocks = <&ad7124_mclk>;
- clock-names = "mclk";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- channel@0 {
- reg = <0>;
- diff-channels = <0 1>;
- adi,reference-select = <0>;
- };
-
- channel@1 {
- reg = <1>;
- bipolar;
- diff-channels = <2 3>;
- adi,reference-select = <0>;
- };
-
- channel@2 {
- reg = <2>;
- diff-channels = <4 5>;
- };
-
- channel@3 {
- reg = <3>;
- diff-channels = <6 7>;
- };
- };
new file mode 100644
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7124.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7124 ADC device driver
+
+maintainers:
+ - Stefan Popa <stefan.popa@analog.com>
+
+description: |
+ Bindings for the Analog Devices AD7124 ADC device. Datasheet can be
+ found here:
+ https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf
+
+properties:
+ compatible:
+ enum:
+ - adi,ad7124-4
+ - adi,ad7124-8
+
+ reg:
+ description: SPI chip select number for the device
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: phandle to the master clock (mclk)
+
+ clock-names:
+ items:
+ - const: mclk
+
+ interrupts:
+ description: IRQ line for the ADC
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ refin1-supply:
+ description: refin1 supply can be used as reference for conversion.
+ maxItems: 1
+
+ refin2-supply:
+ description: refin2 supply can be used as reference for conversion.
+ maxItems: 1
+
+ avdd-supply:
+ description: avdd supply can be used as reference for conversion.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+patternProperties:
+ "^channel@([0-9]|1[0-5])$":
+ type: object
+ description: |
+ Represents the external channels which are connected to the ADC.
+ See Documentation/devicetree/bindings/iio/adc/adc.txt.
+
+ properties:
+ reg:
+ description: |
+ The channel number. It can have up to 8 channels on ad7124-4
+ and 16 channels on ad7124-8, numbered from 0 to 15.
+ items:
+ minimum: 0
+ maximum: 15
+
+ adi,reference-select:
+ description: |
+ Select the reference source to use when converting on
+ the specific channel. Valid values are:
+ 0: REFIN1(+)/REFIN1(−).
+ 1: REFIN2(+)/REFIN2(−).
+ 3: AVDD
+ If this field is left empty, internal reference is selected.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [0, 1, 3]
+
+ diff-channels:
+ description: see Documentation/devicetree/bindings/iio/adc/adc.txt
+ items:
+ minimum: 0
+ maximum: 15
+
+ bipolar:
+ description: see Documentation/devicetree/bindings/iio/adc/adc.txt
+ type: boolean
+
+ required:
+ - reg
+ - diff-channels
+
+examples:
+ - |
+ adc@0 {
+ compatible = "adi,ad7124-4";
+ reg = <0>;
+ spi-max-frequency = <5000000>;
+ interrupts = <25 2>;
+ interrupt-parent = <&gpio>;
+ refin1-supply = <&adc_vref>;
+ clocks = <&ad7124_mclk>;
+ clock-names = "mclk";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0>;
+ diff-channels = <0 1>;
+ adi,reference-select = <0>;
+ };
+
+ channel@1 {
+ reg = <1>;
+ bipolar;
+ diff-channels = <2 3>;
+ adi,reference-select = <0>;
+ };
+
+ channel@2 {
+ reg = <2>;
+ diff-channels = <4 5>;
+ };
+
+ channel@3 {
+ reg = <3>;
+ diff-channels = <6 7>;
+ };
+ };
Convert AD7124 bindings documentation to YAML format. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> --- Changelog v2: - modified SPDX license to GPL-2.0 OR BSD-2-Clause - added regex for a range from 0 to 15 - added minimum and maximum constraints for reg property - set type and range of values for adi,reference-select property - used items for diff-channels property - set bipolar, adi,buffered-positive and negative to type: boolean Changelog v3: - moved adi,buffered-positive and negative properties to own commit Changelog v4: - removed old txt dt-binding .../bindings/iio/adc/adi,ad7124.txt | 75 --------- .../bindings/iio/adc/adi,ad7124.yaml | 144 ++++++++++++++++++ 2 files changed, 144 insertions(+), 75 deletions(-) delete mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml