| Message ID | 459c0bad-c02e-40f0-9e56-1dcdad9c6591.lettre@localhost (mailing list archive) |
|---|---|
| State | Queued, archived |
| Commit | 2269f0c15191af317d64115176a01bf303532af3 |
| Headers | show |
| Series | [GIT,PULL] Allwinner Device Tree Changes for 5.3 | expand |
On Fri, Jun 21, 2019 at 10:08:08AM +0200, Maxime Ripard wrote: > Hi, > > Please pull the following changes for the next release. > > Thanks! > Maxime > > The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9: > > Linux 5.2-rc1 (2019-05-19 15:47:09 -0700) > > are available in the Git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-dt-for-5.3-201906210807 You know, there's a timestamp in the tag too, no need to encode it in the name. > > for you to fetch changes up to 2269f0c15191af317d64115176a01bf303532af3: > > dt-bindings: pwm: Convert Allwinner PWM to a schema (2019-06-21 09:59:10 +0200) > > ---------------------------------------------------------------- > Our usual bunch of patches: > - Some work on the BPi M2-Berry to support various devices > - Convert some bindings to a schema, and a lot of fixes reported by > the schemas we introduced. > - A few other fixes here and there Merged, thanks. -Olof
Hi Olof, On Tue, Jun 25, 2019 at 04:41:19AM -0700, Olof Johansson wrote: > On Fri, Jun 21, 2019 at 10:08:08AM +0200, Maxime Ripard wrote: > > Hi, > > > > Please pull the following changes for the next release. > > > > Thanks! > > Maxime > > > > The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9: > > > > Linux 5.2-rc1 (2019-05-19 15:47:09 -0700) > > > > are available in the Git repository at: > > > > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-dt-for-5.3-201906210807 > > You know, there's a timestamp in the tag too, no need to encode it in the name. Yeah, I've switched to some tooling to send them instead of doing them manually, and having a timestamp was the easiest solution to avoid a collision, but I guess having it down to the minute was a bit overkill. Do you have any preference on this? Thanks! Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
On Tue, Jun 25, 2019 at 2:32 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > Hi Olof, > > On Tue, Jun 25, 2019 at 04:41:19AM -0700, Olof Johansson wrote: > > On Fri, Jun 21, 2019 at 10:08:08AM +0200, Maxime Ripard wrote: > > > Hi, > > > > > > Please pull the following changes for the next release. > > > > > > Thanks! > > > Maxime > > > > > > The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9: > > > > > > Linux 5.2-rc1 (2019-05-19 15:47:09 -0700) > > > > > > are available in the Git repository at: > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-dt-for-5.3-201906210807 > > > > You know, there's a timestamp in the tag too, no need to encode it in the name. > > Yeah, I've switched to some tooling to send them instead of doing them > manually, and having a timestamp was the easiest solution to avoid a > collision, but I guess having it down to the minute was a bit > overkill. Do you have any preference on this? Main thing for me is that I can't tell from time timestamps if it's a respin/new version, or a re-stamp, i.e. if it's something I should care about or not. I.e. it doesn't carry any useful signal for the consuming side and is mostly noise. -Olof
On Tue, Jun 25, 2019 at 02:36:30PM +0200, Olof Johansson wrote: > On Tue, Jun 25, 2019 at 2:32 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > Hi Olof, > > > > On Tue, Jun 25, 2019 at 04:41:19AM -0700, Olof Johansson wrote: > > > On Fri, Jun 21, 2019 at 10:08:08AM +0200, Maxime Ripard wrote: > > > > Hi, > > > > > > > > Please pull the following changes for the next release. > > > > > > > > Thanks! > > > > Maxime > > > > > > > > The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9: > > > > > > > > Linux 5.2-rc1 (2019-05-19 15:47:09 -0700) > > > > > > > > are available in the Git repository at: > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-dt-for-5.3-201906210807 > > > > > > You know, there's a timestamp in the tag too, no need to encode it in the name. > > > > Yeah, I've switched to some tooling to send them instead of doing them > > manually, and having a timestamp was the easiest solution to avoid a > > collision, but I guess having it down to the minute was a bit > > overkill. Do you have any preference on this? > > Main thing for me is that I can't tell from time timestamps if it's a > respin/new version, or a re-stamp, i.e. if it's something I should > care about or not. > > I.e. it doesn't carry any useful signal for the consuming side and is > mostly noise. Ok, so you'd prefer something like <tag>, <tag>-2 if there's multiple, subsequent, PR, and <tag>, <tag>-again if the latter replaces the former? Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
On Tue, Jun 25, 2019 at 10:55 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > On Tue, Jun 25, 2019 at 02:36:30PM +0200, Olof Johansson wrote: > > On Tue, Jun 25, 2019 at 2:32 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > > > Hi Olof, > > > > > > On Tue, Jun 25, 2019 at 04:41:19AM -0700, Olof Johansson wrote: > > > > On Fri, Jun 21, 2019 at 10:08:08AM +0200, Maxime Ripard wrote: > > > > > Hi, > > > > > > > > > > Please pull the following changes for the next release. > > > > > > > > > > Thanks! > > > > > Maxime > > > > > > > > > > The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9: > > > > > > > > > > Linux 5.2-rc1 (2019-05-19 15:47:09 -0700) > > > > > > > > > > are available in the Git repository at: > > > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-dt-for-5.3-201906210807 > > > > > > > > You know, there's a timestamp in the tag too, no need to encode it in the name. > > > > > > Yeah, I've switched to some tooling to send them instead of doing them > > > manually, and having a timestamp was the easiest solution to avoid a > > > collision, but I guess having it down to the minute was a bit > > > overkill. Do you have any preference on this? > > > > Main thing for me is that I can't tell from time timestamps if it's a > > respin/new version, or a re-stamp, i.e. if it's something I should > > care about or not. > > > > I.e. it doesn't carry any useful signal for the consuming side and is > > mostly noise. > > Ok, so you'd prefer something like <tag>, <tag>-2 if there's multiple, > subsequent, PR, and <tag>, <tag>-again if the latter replaces the former? Yeah, that's what a lot of other maintainers do and it's something that's been working pretty well. Sometimes they use -v2 at the end for respins, i.e. dt-2-v2 etc. I recommend deleting respun tags so we don't accidentally merge them (if we didn't see the follow-up). -Olof
On Thu, Jun 27, 2019 at 10:09:53AM +0800, Olof Johansson wrote: > On Tue, Jun 25, 2019 at 10:55 PM Maxime Ripard > <maxime.ripard@bootlin.com> wrote: > > > > On Tue, Jun 25, 2019 at 02:36:30PM +0200, Olof Johansson wrote: > > > On Tue, Jun 25, 2019 at 2:32 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > > > > > Hi Olof, > > > > > > > > On Tue, Jun 25, 2019 at 04:41:19AM -0700, Olof Johansson wrote: > > > > > On Fri, Jun 21, 2019 at 10:08:08AM +0200, Maxime Ripard wrote: > > > > > > Hi, > > > > > > > > > > > > Please pull the following changes for the next release. > > > > > > > > > > > > Thanks! > > > > > > Maxime > > > > > > > > > > > > The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9: > > > > > > > > > > > > Linux 5.2-rc1 (2019-05-19 15:47:09 -0700) > > > > > > > > > > > > are available in the Git repository at: > > > > > > > > > > > > https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-dt-for-5.3-201906210807 > > > > > > > > > > You know, there's a timestamp in the tag too, no need to encode it in the name. > > > > > > > > Yeah, I've switched to some tooling to send them instead of doing them > > > > manually, and having a timestamp was the easiest solution to avoid a > > > > collision, but I guess having it down to the minute was a bit > > > > overkill. Do you have any preference on this? > > > > > > Main thing for me is that I can't tell from time timestamps if it's a > > > respin/new version, or a re-stamp, i.e. if it's something I should > > > care about or not. > > > > > > I.e. it doesn't carry any useful signal for the consuming side and is > > > mostly noise. > > > > Ok, so you'd prefer something like <tag>, <tag>-2 if there's multiple, > > subsequent, PR, and <tag>, <tag>-again if the latter replaces the former? > > Yeah, that's what a lot of other maintainers do and it's something > that's been working pretty well. > > Sometimes they use -v2 at the end for respins, i.e. dt-2-v2 etc. I > recommend deleting respun tags so we don't accidentally merge them (if > we didn't see the follow-up). Ok, I'll adjust my program to do so next time then, thanks! Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Hi, Please pull the following changes for the next release. Thanks! Maxime The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9: Linux 5.2-rc1 (2019-05-19 15:47:09 -0700) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-dt-for-5.3-201906210807 for you to fetch changes up to 2269f0c15191af317d64115176a01bf303532af3: dt-bindings: pwm: Convert Allwinner PWM to a schema (2019-06-21 09:59:10 +0200) ---------------------------------------------------------------- Our usual bunch of patches: - Some work on the BPi M2-Berry to support various devices - Convert some bindings to a schema, and a lot of fixes reported by the schemas we introduced. - A few other fixes here and there ---------------------------------------------------------------- Chen-Yu Tsai (1): ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface) Jernej Skrabec (1): ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT Maxime Ripard (11): dt-bindings: bus: Convert Allwinner RSB to a schema ARM: dts: sun6i: Add default address and size cells for SPI ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings ARM: dts: sun7i: icnova-swac: Fix the model vendor ARM: dts: gr8-evb: Fix RTC vendor ARM: dts: sun6i: Fix RTC node ARM: dts: sun6i: Add external crystals accuracy ARM: dts: sun8i: v3s: Fix the RTC node ARM: dts: sun8i: v3s: Add external crystals accuracy ARM: dts: sun8i: r40: Change the RTC compatible dt-bindings: pwm: Convert Allwinner PWM to a schema Pablo Greco (7): ARM: dts: sun8i: r40: bananapi-m2-ultra: Add GPIO pin-bank regulator supplies ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on Priit Laes (1): ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies Documentation/devicetree/bindings/arm/sunxi.yaml | 2 +- Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml | 79 ++++- Documentation/devicetree/bindings/bus/sunxi-rsb.txt | 47 +--- Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml | 57 +++- Documentation/devicetree/bindings/pwm/pwm-sun4i.txt | 24 +- arch/arm/boot/dts/sun5i-gr8-evb.dts | 2 +- arch/arm/boot/dts/sun6i-a31.dtsi | 25 +- arch/arm/boot/dts/sun7i-a20-icnova-swac.dts | 3 +- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 8 +- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 4 +- arch/arm/boot/dts/sun8i-a83t.dtsi | 29 ++- arch/arm/boot/dts/sun8i-h3-beelink-x2.dts | 4 +- arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 7 +- arch/arm/boot/dts/sun8i-r40.dtsi | 3 +- arch/arm/boot/dts/sun8i-v3s.dtsi | 13 +- arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 123 +++++++- 16 files changed, 341 insertions(+), 89 deletions(-) create mode 100644 Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml delete mode 100644 Documentation/devicetree/bindings/bus/sunxi-rsb.txt create mode 100644 Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml delete mode 100644 Documentation/devicetree/bindings/pwm/pwm-sun4i.txt