| Message ID | 20190629195443.366-1-wsa+renesas@sang-engineering.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | mmc: renesas_sdhi: support manual calibration | expand |
Hi Wolfram-san, Thank you for the patches! > From: Wolfram Sang, Sent: Sunday, June 30, 2019 4:55 AM > > For those who read the text already, I'll put the changes since v1 here: > > * check 'quirk' pointer before using it in patch 3 > * fixed a bug in the verification debug patch (not visible in this series) > * tested on more boards > > Old cover-letter follows: > > > Some R-Car Gen3 SoCs need corrections after they tuned to HS400. This > series implements that. Please have a look at the patch descriptions for > details. Since other HS400 issue is investigated now, I'd like to wait these patches to upstreaming a little more. Best regards, Yoshihiro Shimoda > The origins were patches in the BSP from Takeshi Saito. However, this > series is heavily refactored: > > * DT configuration was dropped, there is no user for it > * the fixup offset is currently hardcoded because all affected SoCs use > the same offset. We can add it later to the struct quirks if needed > * disabling HS400 for some SoCs was already upstreamed > * the callback in the TMIO was made more generic to allow other use > cases in the future > * less impact on the TMIO driver by stricter seperation of the SDHI parts > * clearing the runtime flag in the error case was moved from > select_tuning to hw_reset to catch all error cases > * cosmetic fixups > > There is a branch for testing here: > > git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/topic/sdhi-manual-calib > > Tested with a Renesas R-Car M3-N (needs this new quirk), H3 ES2.0 > (doesn't need this new but older quirks), and H2 (needs no quirk). > > The patches were developed against mmc/next. However, the above branch > is based on v5.2-rc6 with some cherry-picked patches from mmc/next, so > Geert can consume it easier for his renesas-drivers branch. There are > two more patches in that branch worth mentioning. A clk driver WIP patch > which I needed to get HS400 on my M3-N working at all. We are discussing > this patch internally right now and its upstreaming is a seperate issue. > > Also, there is a debug patch on top. I can't test that the manual fixup > values improve HS400 because the actual issue only shows with > temperatures I can't (and don't want to) provide here in my office. > So, the debug patches add some trace_printk to demonstrate the functions > are called and the outputs match the intended state machine. > > Here are examples (with comments) from my M3-N. If you review this, > please don't trust anything I write here. > > An unaffected SDHI instance (no eMMC): > > Adjustment and runtime flag get disabled during the reset in the > beginning of the initialization. The same reset routine will be called > when tuning fails. > > kworker/0:2-965 [000] .... 1.413767: renesas_sdhi_reset_hs400_mode: ee100000.sd: adjustment disabled > kworker/0:2-965 [000] .... 1.413768: renesas_sdhi_hw_reset: ee100000.sd: reset! flag disabled > > > An SDHI instance with a HS400 capable eMMC connected: > > When preparing HS400 tuning, (potential) old HS400 tuning gets reset and > the manual adjustment gets disabled, the runtime flag (signalling new > manual adjustment will be needed) is set: > > kworker/0:1H-1009 [000] .... 1.864628: renesas_sdhi_reset_hs400_mode: ee140000.sd: adjustment disabled > kworker/0:1H-1009 [000] .... 1.864629: renesas_sdhi_prepare_hs400_tuning: ee140000.sd: flag enabled > > Lots of tuning CMDs: > > kworker/0:2-965 [000] .... 1.864673: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.864706: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.864735: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.864765: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.864797: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.864825: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.864855: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.864882: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.864909: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.864935: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.864966: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.864998: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.865025: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.865052: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.865079: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.865106: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.865130: renesas_sdhi_fixup_request: ee140000.sd: opcode 6, flag 1 > kworker/0:2-965 [000] .... 1.865603: renesas_sdhi_fixup_request: ee140000.sd: opcode 13, flag 1 > > First CMD13 after tuning discovered, enable adjustment, clear runtime > flag: > > kworker/0:2-965 [000] .... 1.865609: renesas_sdhi_fixup_request: ee140000.sd: adjustment enabled, flag disabled > kworker/0:2-965 [000] .... 1.865635: renesas_sdhi_fixup_request: ee140000.sd: opcode 6, flag 0 > kworker/0:2-965 [000] .... 1.865654: renesas_sdhi_fixup_request: ee140000.sd: opcode 13, flag 0 > kworker/0:2-965 [000] .... 1.865676: renesas_sdhi_fixup_request: ee140000.sd: opcode 6, flag 0 > kworker/0:2-965 [000] .... 1.866143: renesas_sdhi_fixup_request: ee140000.sd: opcode 13, flag 0 > kworker/0:2-965 [000] .... 1.866601: renesas_sdhi_fixup_request: ee140000.sd: opcode 18, flag 0 > > Reading multiple blocks (CMD18) above failed > > kworker/0:2-965 [000] .... 1.866867: renesas_sdhi_fixup_request: ee140000.sd: opcode 6, flag 0 > kworker/0:2-965 [000] .... 1.867113: renesas_sdhi_fixup_request: ee140000.sd: opcode 13, flag 0 > kworker/0:2-965 [000] .... 1.867137: renesas_sdhi_fixup_request: ee140000.sd: opcode 6, flag 0 > kworker/0:2-965 [000] .... 1.867384: renesas_sdhi_fixup_request: ee140000.sd: opcode 13, flag 0 > kworker/0:2-965 [000] .... 1.867409: renesas_sdhi_fixup_request: ee140000.sd: opcode 6, flag 0 > kworker/0:2-965 [000] .... 1.867651: renesas_sdhi_fixup_request: ee140000.sd: opcode 13, flag 0 > > Seems like another retune is need, start cycle again: > > kworker/0:1H-1009 [000] .... 1.867880: renesas_sdhi_reset_hs400_mode: ee140000.sd: adjustment disabled > kworker/0:1H-1009 [000] .... 1.867882: renesas_sdhi_prepare_hs400_tuning: ee140000.sd: flag enabled > kworker/0:2-965 [000] .... 1.867926: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.867958: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.867986: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868019: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868048: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868076: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868103: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868129: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868156: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868181: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868208: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868237: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868267: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868294: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868321: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868347: renesas_sdhi_fixup_request: ee140000.sd: opcode 21, flag 1 > kworker/0:2-965 [000] .... 1.868370: renesas_sdhi_fixup_request: ee140000.sd: opcode 6, flag 1 > kworker/0:2-965 [000] .... 1.868837: renesas_sdhi_fixup_request: ee140000.sd: opcode 13, flag 1 > kworker/0:2-965 [000] .... 1.868842: renesas_sdhi_fixup_request: ee140000.sd: adjustment enabled, flag disabled > kworker/0:2-965 [000] .... 1.868869: renesas_sdhi_fixup_request: ee140000.sd: opcode 6, flag 0 > kworker/0:2-965 [000] .... 1.868888: renesas_sdhi_fixup_request: ee140000.sd: opcode 13, flag 0 > kworker/0:2-965 [000] .... 1.868913: renesas_sdhi_fixup_request: ee140000.sd: opcode 6, flag 0 > kworker/0:2-965 [000] .... 1.869381: renesas_sdhi_fixup_request: ee140000.sd: opcode 13, flag 0 > > Finally, we can read lots of blocks without problems. The manual > adjustment is still enabled as desired: > > kworker/0:2-965 [000] .... 1.870027: renesas_sdhi_fixup_request: ee140000.sd: opcode 18, flag 0 > kworker/0:2-965 [000] .... 1.871300: renesas_sdhi_fixup_request: ee140000.sd: opcode 18, flag 0 > kworker/0:2-965 [000] .... 1.871454: renesas_sdhi_fixup_request: ee140000.sd: opcode 18, flag 0 > kworker/0:2-965 [000] .... 1.871579: renesas_sdhi_fixup_request: ee140000.sd: opcode 18, flag 0 > kworker/0:2-965 [000] .... 1.871712: renesas_sdhi_fixup_request: ee140000.sd: opcode 18, flag 0 > ... > > > Okay, I know this is a lot of text, but it is a subtle issue, so I > wanted to provide the details which enable other people to actually > review what I have done. > > Shimoda-san, if the BSP team could have a look and share their opinion > or could test, I'd be most grateful. > > Thanks and happy hacking, > > Wolfram > > > Wolfram Sang (4): > mmc: renesas_sdhi: keep sorting > mmc: tmio: add generic hook to fixup after a completed request > mmc: renesas_sdhi: make quirks info accessible outside probe() > mmc: renesas_sdhi: support manual calibration > > drivers/mmc/host/renesas_sdhi.h | 9 ++ > drivers/mmc/host/renesas_sdhi_core.c | 129 +++++++++++++++++++++++++-- > drivers/mmc/host/tmio_mmc.h | 1 + > drivers/mmc/host/tmio_mmc_core.c | 3 + > 4 files changed, 135 insertions(+), 7 deletions(-) > > -- > 2.20.1