diff mbox series

net: ethernet: mediatek: Allow non TRGMII mode with MT7621 DDR2 devices

Message ID 20190629122451.19578-1-opensource@vdorst.com (mailing list archive)
State New, archived
Headers show
Series net: ethernet: mediatek: Allow non TRGMII mode with MT7621 DDR2 devices | expand

Commit Message

René van Dorst June 29, 2019, 12:24 p.m. UTC
No reason to error out on a MT7621 device with DDR2 memory when non
TRGMII mode is selected.
Only MT7621 DDR2 clock setup is not supported for TRGMII mode.
But non TRGMII mode doesn't need any special clock setup.

Signed-off-by: René van Dorst <opensource@vdorst.com>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

Comments

René van Dorst July 1, 2019, 12:57 p.m. UTC | #1
Quoting René van Dorst <opensource@vdorst.com>:

I see that I also forgot to tag this patch for net-next.

Greats,

René

> No reason to error out on a MT7621 device with DDR2 memory when non
> TRGMII mode is selected.
> Only MT7621 DDR2 clock setup is not supported for TRGMII mode.
> But non TRGMII mode doesn't need any special clock setup.
>
> Signed-off-by: René van Dorst <opensource@vdorst.com>
> ---
>  drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c  
> b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> index 066712f2e985..b20b3a5a1ebb 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> @@ -139,9 +139,12 @@ static int mt7621_gmac0_rgmii_adjust(struct  
> mtk_eth *eth,
>  {
>  	u32 val;
>
> -	/* Check DDR memory type. Currently DDR2 is not supported. */
> +	/* Check DDR memory type.
> +	 * Currently TRGMII mode with DDR2 memory is not supported.
> +	 */
>  	regmap_read(eth->ethsys, ETHSYS_SYSCFG, &val);
> -	if (val & SYSCFG_DRAM_TYPE_DDR2) {
> +	if (interface == PHY_INTERFACE_MODE_TRGMII &&
> +	    val & SYSCFG_DRAM_TYPE_DDR2) {
>  		dev_err(eth->dev,
>  			"TRGMII mode with DDR2 memory is not supported!\n");
>  		return -EOPNOTSUPP;
> --
> 2.20.1
David Miller July 2, 2019, 9:06 p.m. UTC | #2
From: René van Dorst <opensource@vdorst.com>
Date: Sat, 29 Jun 2019 14:24:51 +0200

> No reason to error out on a MT7621 device with DDR2 memory when non
> TRGMII mode is selected.
> Only MT7621 DDR2 clock setup is not supported for TRGMII mode.
> But non TRGMII mode doesn't need any special clock setup.
> 
> Signed-off-by: René van Dorst <opensource@vdorst.com>

Applied to net-next, thanks.
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 066712f2e985..b20b3a5a1ebb 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -139,9 +139,12 @@  static int mt7621_gmac0_rgmii_adjust(struct mtk_eth *eth,
 {
 	u32 val;
 
-	/* Check DDR memory type. Currently DDR2 is not supported. */
+	/* Check DDR memory type.
+	 * Currently TRGMII mode with DDR2 memory is not supported.
+	 */
 	regmap_read(eth->ethsys, ETHSYS_SYSCFG, &val);
-	if (val & SYSCFG_DRAM_TYPE_DDR2) {
+	if (interface == PHY_INTERFACE_MODE_TRGMII &&
+	    val & SYSCFG_DRAM_TYPE_DDR2) {
 		dev_err(eth->dev,
 			"TRGMII mode with DDR2 memory is not supported!\n");
 		return -EOPNOTSUPP;