| Message ID | 20190703164822.17924-6-frank-w@public-files.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | implement poweroff for mt6323/6397 | expand |
On 03/07/2019 18:48, Frank Wunderlich wrote: > From: Josef Friedl <josef.friedl@speed.at> > > Suggested-by: Frank Wunderlich <frank-w@public-files.de> > Signed-off-by: Josef Friedl <josef.friedl@speed.at> Why is there a Signed-off-by from Josef for this patch but not for the others?
On Wed, 2019-07-03 at 18:48 +0200, Frank Wunderlich wrote: > From: Josef Friedl <josef.friedl@speed.at> > > Suggested-by: Frank Wunderlich <frank-w@public-files.de> > Signed-off-by: Josef Friedl <josef.friedl@speed.at> > Signed-off-by: Frank Wunderlich <frank-w@public-files.de> > --- > drivers/power/reset/Kconfig | 10 +++ > drivers/power/reset/Makefile | 1 + > drivers/power/reset/mt6323-poweroff.c | 97 +++++++++++++++++++++++++++ > include/linux/mfd/mt6397/core.h | 2 + > 4 files changed, 110 insertions(+) > create mode 100644 drivers/power/reset/mt6323-poweroff.c > > -- > 2.17.1 > > diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig > index 980951dff834..492678e22088 100644 > --- a/drivers/power/reset/Kconfig > +++ b/drivers/power/reset/Kconfig > @@ -140,6 +140,16 @@ config POWER_RESET_LTC2952 > This driver supports an external powerdown trigger and board power > down via the LTC2952. Bindings are made in the device tree. > > +config POWER_RESET_MT6323 > + bool "MediaTek MT6323 power-off driver" > + depends on MFD_MT6397 > + help > + The power-off driver is responsible for externally shutdown down > + the power of a remote MediaTek SoC MT6323 is connected to through > + controlling a tiny circuit BBPU inside MT6323 RTC. > + > + Say Y if you have a board where MT6323 could be found. > + > config POWER_RESET_QNAP > bool "QNAP power-off driver" > depends on OF_GPIO && PLAT_ORION > diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile > index 0aebee954ac1..94eaceb01d66 100644 > --- a/drivers/power/reset/Makefile > +++ b/drivers/power/reset/Makefile > @@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o > obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o > obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o > obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o > +obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o > obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o > obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o > obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o > diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c > new file mode 100644 > index 000000000000..1caf43d9e46d > --- /dev/null > +++ b/drivers/power/reset/mt6323-poweroff.c > @@ -0,0 +1,97 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Power off through MediaTek PMIC > + * > + * Copyright (C) 2018 MediaTek Inc. > + * > + * Author: Sean Wang <sean.wang@mediatek.com> > + * > + */ > + > +#include <linux/err.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > +#include <linux/mfd/mt6397/core.h> > +#include <linux/mfd/mt6397/rtc.h> > + > +struct mt6323_pwrc { > + struct device *dev; > + struct regmap *regmap; > + u32 base; > +}; > + > +static struct mt6323_pwrc *mt_pwrc; > + > +static void mt6323_do_pwroff(void) > +{ > + struct mt6323_pwrc *pwrc = mt_pwrc; > + unsigned int val; > + int ret; > + > + regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY); > + regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1); > + > + ret = regmap_read_poll_timeout(pwrc->regmap, > + pwrc->base + RTC_BBPU, val, > + !(val & RTC_BBPU_CBUSY), > + MTK_RTC_POLL_DELAY_US, > + MTK_RTC_POLL_TIMEOUT); > + if (ret) > + dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret); > + > + /* Wait some time until system down, otherwise, notice with a warn */ > + mdelay(1000); > + > + WARN_ONCE(1, "Unable to power off system\n"); > +} > + > +static int mt6323_pwrc_probe(struct platform_device *pdev) > +{ > + struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent); > + struct mt6323_pwrc *pwrc; > + struct resource *res; > + > + pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL); > + if (!pwrc) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + pwrc->base = res->start; > + pwrc->regmap = mt6397_chip->regmap; > + pwrc->dev = &pdev->dev; > + mt_pwrc = pwrc; > + > + pm_power_off = &mt6323_do_pwroff; We had implement MT8173 poweroff function in arm-trusted-firmware's PSCI plat_system_off() function. MT8173 SoC is using PMIC MT6397. (Ref: https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8173/plat_pm.c and https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8173/drivers/rtc) Do you think it's better to implement poweroff function into arm-trusted-firmware compared to hijack pm_poweroff() function in Kernel? Right now, we are doing the upstream of other PMIC chip like MT6358's poweroff function in arm-trusted-firmware too. > + > + return 0; > +} > + > +static int mt6323_pwrc_remove(struct platform_device *pdev) > +{ > + if (pm_power_off == &mt6323_do_pwroff) > + pm_power_off = NULL; > + > + return 0; > +} > + > +static const struct of_device_id mt6323_pwrc_dt_match[] = { > + { .compatible = "mediatek,mt6323-pwrc" }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match); > + > +static struct platform_driver mt6323_pwrc_driver = { > + .probe = mt6323_pwrc_probe, > + .remove = mt6323_pwrc_remove, > + .driver = { > + .name = "mt6323-pwrc", > + .of_match_table = mt6323_pwrc_dt_match, > + }, > +}; > + > +module_platform_driver(mt6323_pwrc_driver); > + > +MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC"); > +MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); > +MODULE_LICENSE("GPL v2"); > diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h > index 25a95e72179b..652da61e3711 100644 > --- a/include/linux/mfd/mt6397/core.h > +++ b/include/linux/mfd/mt6397/core.h > @@ -7,6 +7,8 @@ > #ifndef __MFD_MT6397_CORE_H__ > #define __MFD_MT6397_CORE_H__ > > +#include <linux/mutex.h> > + > enum mt6397_irq_numbers { > MT6397_IRQ_SPKL_AB = 0,
> Gesendet: Donnerstag, 04. Juli 2019 um 12:03 Uhr > Von: "Ran Bi" <ran.bi@mediatek.com> > We had implement MT8173 poweroff function in arm-trusted-firmware's PSCI > plat_system_off() function. MT8173 SoC is using PMIC MT6397. (Ref: > https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8173/plat_pm.c and https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8173/drivers/rtc) Do you think it's better to implement poweroff function into arm-trusted-firmware compared to hijack pm_poweroff() function in Kernel? Right now, we are doing the upstream of other PMIC chip like MT6358's poweroff function in arm-trusted-firmware too. ATF imho only used for arm64, my board is 32bit armv7 and i (currently) do not boot up with ATF regards Frank
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 980951dff834..492678e22088 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -140,6 +140,16 @@ config POWER_RESET_LTC2952 This driver supports an external powerdown trigger and board power down via the LTC2952. Bindings are made in the device tree. +config POWER_RESET_MT6323 + bool "MediaTek MT6323 power-off driver" + depends on MFD_MT6397 + help + The power-off driver is responsible for externally shutdown down + the power of a remote MediaTek SoC MT6323 is connected to through + controlling a tiny circuit BBPU inside MT6323 RTC. + + Say Y if you have a board where MT6323 could be found. + config POWER_RESET_QNAP bool "QNAP power-off driver" depends on OF_GPIO && PLAT_ORION diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 0aebee954ac1..94eaceb01d66 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o +obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c new file mode 100644 index 000000000000..1caf43d9e46d --- /dev/null +++ b/drivers/power/reset/mt6323-poweroff.c @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Power off through MediaTek PMIC + * + * Copyright (C) 2018 MediaTek Inc. + * + * Author: Sean Wang <sean.wang@mediatek.com> + * + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6397/rtc.h> + +struct mt6323_pwrc { + struct device *dev; + struct regmap *regmap; + u32 base; +}; + +static struct mt6323_pwrc *mt_pwrc; + +static void mt6323_do_pwroff(void) +{ + struct mt6323_pwrc *pwrc = mt_pwrc; + unsigned int val; + int ret; + + regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY); + regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1); + + ret = regmap_read_poll_timeout(pwrc->regmap, + pwrc->base + RTC_BBPU, val, + !(val & RTC_BBPU_CBUSY), + MTK_RTC_POLL_DELAY_US, + MTK_RTC_POLL_TIMEOUT); + if (ret) + dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret); + + /* Wait some time until system down, otherwise, notice with a warn */ + mdelay(1000); + + WARN_ONCE(1, "Unable to power off system\n"); +} + +static int mt6323_pwrc_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent); + struct mt6323_pwrc *pwrc; + struct resource *res; + + pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL); + if (!pwrc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pwrc->base = res->start; + pwrc->regmap = mt6397_chip->regmap; + pwrc->dev = &pdev->dev; + mt_pwrc = pwrc; + + pm_power_off = &mt6323_do_pwroff; + + return 0; +} + +static int mt6323_pwrc_remove(struct platform_device *pdev) +{ + if (pm_power_off == &mt6323_do_pwroff) + pm_power_off = NULL; + + return 0; +} + +static const struct of_device_id mt6323_pwrc_dt_match[] = { + { .compatible = "mediatek,mt6323-pwrc" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match); + +static struct platform_driver mt6323_pwrc_driver = { + .probe = mt6323_pwrc_probe, + .remove = mt6323_pwrc_remove, + .driver = { + .name = "mt6323-pwrc", + .of_match_table = mt6323_pwrc_dt_match, + }, +}; + +module_platform_driver(mt6323_pwrc_driver); + +MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC"); +MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h index 25a95e72179b..652da61e3711 100644 --- a/include/linux/mfd/mt6397/core.h +++ b/include/linux/mfd/mt6397/core.h @@ -7,6 +7,8 @@ #ifndef __MFD_MT6397_CORE_H__ #define __MFD_MT6397_CORE_H__ +#include <linux/mutex.h> + enum mt6397_irq_numbers { MT6397_IRQ_SPKL_AB = 0, MT6397_IRQ_SPKR_AB,