@@ -142,6 +142,142 @@
#define TEGRA_SMC_PMC_READ 0xaa
#define TEGRA_SMC_PMC_WRITE 0xbb
+/* USB2 SLEEPWALK registers */
+#define UTMIP(_port, _offset1, _offset2) \
+ (((_port) <= 2) ? (_offset1) : (_offset2))
+
+#define PMC_UTMIP_UHSIC_SLEEP_CFG(x) UTMIP(x, 0x1fc, 0x4d0)
+#define UTMIP_MASTER_ENABLE(x) UTMIP(x, BIT(8 * (x)), BIT(0))
+#define UTMIP_FSLS_USE_PMC(x) UTMIP(x, BIT(8 * (x) + 1), \
+ BIT(1))
+#define UTMIP_PCTRL_USE_PMC(x) UTMIP(x, BIT(8 * (x) + 2), \
+ BIT(2))
+#define UTMIP_TCTRL_USE_PMC(x) UTMIP(x, BIT(8 * (x) + 3), \
+ BIT(3))
+#define UTMIP_WAKE_VAL(_port, _value) (((_value) & 0xf) << \
+ (UTMIP(_port, 8 * (_port) + 4, 4)))
+#define UTMIP_WAKE_VAL_NONE(_port) UTMIP_WAKE_VAL(_port, 12)
+#define UTMIP_WAKE_VAL_ANY(_port) UTMIP_WAKE_VAL(_port, 15)
+
+#define PMC_UTMIP_UHSIC_SLEEP_CFG1 (0x4d0)
+#define UTMIP_RPU_SWITC_LOW_USE_PMC_PX(x) BIT((x) + 8)
+#define UTMIP_RPD_CTRL_USE_PMC_PX(x) BIT((x) + 16)
+
+#define PMC_UTMIP_MASTER_CONFIG (0x274)
+#define UTMIP_PWR(x) UTMIP(x, BIT(x), BIT(4))
+#define UHSIC_PWR(x) BIT(3)
+
+#define PMC_USB_DEBOUNCE_DEL (0xec)
+#define DEBOUNCE_VAL(x) (((x) & 0xffff) << 0)
+#define UTMIP_LINE_DEB_CNT(x) (((x) & 0xf) << 16)
+#define UHSIC_LINE_DEB_CNT(x) (((x) & 0xf) << 20)
+
+#define PMC_UTMIP_UHSIC_FAKE(x) UTMIP(x, 0x218, 0x294)
+#define UTMIP_FAKE_USBOP_VAL(x) UTMIP(x, BIT(4 * (x)), BIT(8))
+#define UTMIP_FAKE_USBON_VAL(x) UTMIP(x, BIT(4 * (x) + 1), \
+ BIT(9))
+#define UTMIP_FAKE_USBOP_EN(x) UTMIP(x, BIT(4 * (x) + 2), \
+ BIT(10))
+#define UTMIP_FAKE_USBON_EN(x) UTMIP(x, BIT(4 * (x) + 3), \
+ BIT(11))
+
+#define PMC_UTMIP_UHSIC_SLEEPWALK_CFG(x) UTMIP(x, 0x200, 0x288)
+#define UTMIP_LINEVAL_WALK_EN(x) UTMIP(x, BIT(8 * (x) + 7), \
+ BIT(15))
+
+#define PMC_USB_AO (0xf0)
+#define USBOP_VAL_PD(x) UTMIP(x, BIT(4 * (x)), BIT(20))
+#define USBON_VAL_PD(x) UTMIP(x, BIT(4 * (x) + 1), \
+ BIT(21))
+#define STROBE_VAL_PD(x) BIT(12)
+#define DATA0_VAL_PD(x) BIT(13)
+#define DATA1_VAL_PD BIT(24)
+
+#define PMC_UTMIP_UHSIC_SAVED_STATE(x) UTMIP(x, 0x1f0, 0x280)
+#define SPEED(_port, _value) (((_value) & 0x3) << \
+ (UTMIP(_port, 8 * (_port), 8)))
+#define UTMI_HS(_port) SPEED(_port, 0)
+#define UTMI_FS(_port) SPEED(_port, 1)
+#define UTMI_LS(_port) SPEED(_port, 2)
+#define UTMI_RST(_port) SPEED(_port, 3)
+
+#define PMC_UTMIP_UHSIC_TRIGGERS (0x1ec)
+#define UTMIP_CLR_WALK_PTR(x) UTMIP(x, BIT(x), BIT(16))
+#define UTMIP_CAP_CFG(x) UTMIP(x, BIT((x) + 4), BIT(17))
+#define UTMIP_CLR_WAKE_ALARM(x) UTMIP(x, BIT((x) + 12), \
+ BIT(19))
+#define UHSIC_CLR_WALK_PTR BIT(3)
+#define UHSIC_CLR_WAKE_ALARM BIT(15)
+
+#define PMC_UTMIP_SLEEPWALK_PX(x) UTMIP(x, 0x204 + (4 * (x)), \
+ 0x4e0)
+/* phase A */
+#define UTMIP_USBOP_RPD_A BIT(0)
+#define UTMIP_USBON_RPD_A BIT(1)
+#define UTMIP_AP_A BIT(4)
+#define UTMIP_AN_A BIT(5)
+#define UTMIP_HIGHZ_A BIT(6)
+/* phase B */
+#define UTMIP_USBOP_RPD_B BIT(8)
+#define UTMIP_USBON_RPD_B BIT(9)
+#define UTMIP_AP_B BIT(12)
+#define UTMIP_AN_B BIT(13)
+#define UTMIP_HIGHZ_B BIT(14)
+/* phase C */
+#define UTMIP_USBOP_RPD_C BIT(16)
+#define UTMIP_USBON_RPD_C BIT(17)
+#define UTMIP_AP_C BIT(20)
+#define UTMIP_AN_C BIT(21)
+#define UTMIP_HIGHZ_C BIT(22)
+/* phase D */
+#define UTMIP_USBOP_RPD_D BIT(24)
+#define UTMIP_USBON_RPD_D BIT(25)
+#define UTMIP_AP_D BIT(28)
+#define UTMIP_AN_D BIT(29)
+#define UTMIP_HIGHZ_D BIT(30)
+
+#define PMC_UTMIP_UHSIC_LINE_WAKEUP (0x26c)
+#define UTMIP_LINE_WAKEUP_EN(x) UTMIP(x, BIT(x), BIT(4))
+#define UHSIC_LINE_WAKEUP_EN BIT(3)
+
+#define PMC_UTMIP_TERM_PAD_CFG (0x1f8)
+#define PCTRL_VAL(x) (((x) & 0x3f) << 1)
+#define TCTRL_VAL(x) (((x) & 0x3f) << 7)
+
+#define PMC_UTMIP_PAD_CFGX(x) (0x4c0 + (4 * (x)))
+#define RPD_CTRL_PX(x) (((x) & 0x1f) << 22)
+
+#define PMC_UHSIC_SLEEP_CFG PMC_UTMIP_UHSIC_SLEEP_CFG(0)
+#define UHSIC_MASTER_ENABLE BIT(24)
+#define UHSIC_WAKE_VAL(_value) (((_value) & 0xf) << 28)
+#define UHSIC_WAKE_VAL_SD10 UHSIC_WAKE_VAL(2)
+#define UHSIC_WAKE_VAL_NONE UHSIC_WAKE_VAL(12)
+
+#define PMC_UHSIC_FAKE PMC_UTMIP_UHSIC_FAKE(0)
+#define UHSIC_FAKE_STROBE_VAL BIT(12)
+#define UHSIC_FAKE_DATA_VAL BIT(13)
+#define UHSIC_FAKE_STROBE_EN BIT(14)
+#define UHSIC_FAKE_DATA_EN BIT(15)
+
+#define PMC_UHSIC_SAVED_STATE PMC_UTMIP_UHSIC_SAVED_STATE(0)
+#define UHSIC_MODE(_value) (((_value) & 0x1) << 24)
+#define UHSIC_HS UHSIC_MODE(0)
+#define UHSIC_RST UHSIC_MODE(1)
+
+#define PMC_UHSIC_SLEEPWALK_CFG PMC_UTMIP_UHSIC_SLEEPWALK_CFG(0)
+#define UHSIC_WAKE_WALK_EN BIT(30)
+#define UHSIC_LINEVAL_WALK_EN BIT(31)
+
+#define PMC_UHSIC_SLEEPWALK_P0 (0x210)
+#define UHSIC_DATA0_RPD_A BIT(1)
+#define UHSIC_DATA0_RPU_B BIT(11)
+#define UHSIC_DATA0_RPU_C BIT(19)
+#define UHSIC_DATA0_RPU_D BIT(27)
+#define UHSIC_STROBE_RPU_A BIT(2)
+#define UHSIC_STROBE_RPD_B BIT(8)
+#define UHSIC_STROBE_RPD_C BIT(16)
+#define UHSIC_STROBE_RPD_D BIT(24)
+
struct tegra_powergate {
struct generic_pm_domain genpd;
struct tegra_pmc *pmc;
@@ -689,6 +825,332 @@ static int tegra_genpd_power_off(struct generic_pm_domain *domain)
return err;
}
+/* T210 USB2 SLEEPWALK APIs */
+int tegra_pmc_utmi_phy_enable_sleepwalk(int port, enum usb_device_speed speed,
+ struct tegra_utmi_pad_config *config)
+{
+ u32 reg;
+
+ pr_debug("PMC %s : port %d, speed %d\n", __func__, port, speed);
+
+ /* ensure sleepwalk logic is disabled */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+ reg &= ~UTMIP_MASTER_ENABLE(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+ /* ensure sleepwalk logics are in low power mode */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_MASTER_CONFIG);
+ reg |= UTMIP_PWR(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_MASTER_CONFIG);
+
+ /* set debounce time */
+ reg = tegra_pmc_readl(pmc, PMC_USB_DEBOUNCE_DEL);
+ reg &= ~UTMIP_LINE_DEB_CNT(~0);
+ reg |= UTMIP_LINE_DEB_CNT(0x1);
+ tegra_pmc_writel(pmc, reg, PMC_USB_DEBOUNCE_DEL);
+
+ /* ensure fake events of sleepwalk logic are desiabled */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_FAKE(port));
+ reg &= ~(UTMIP_FAKE_USBOP_VAL(port) | UTMIP_FAKE_USBON_VAL(port) |
+ UTMIP_FAKE_USBOP_EN(port) | UTMIP_FAKE_USBON_EN(port));
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_FAKE(port));
+
+ /* ensure wake events of sleepwalk logic are not latched */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+ reg &= ~UTMIP_LINE_WAKEUP_EN(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+ /* disable wake event triggers of sleepwalk logic */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+ reg &= ~UTMIP_WAKE_VAL(port, ~0);
+ reg |= UTMIP_WAKE_VAL_NONE(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+ /* power down the line state detectors of the pad */
+ reg = tegra_pmc_readl(pmc, PMC_USB_AO);
+ reg |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port));
+ tegra_pmc_writel(pmc, reg, PMC_USB_AO);
+
+ /* save state per speed */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SAVED_STATE(port));
+ reg &= ~SPEED(port, ~0);
+ if (speed == USB_SPEED_HIGH)
+ reg |= UTMI_HS(port);
+ else if (speed == USB_SPEED_FULL)
+ reg |= UTMI_FS(port);
+ else if (speed == USB_SPEED_LOW)
+ reg |= UTMI_LS(port);
+ else
+ reg |= UTMI_RST(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SAVED_STATE(port));
+
+ /* enable the trigger of the sleepwalk logic */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
+ reg |= UTMIP_LINEVAL_WALK_EN(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SLEEPWALK_CFG(port));
+
+ /* reset the walk pointer and clear the alarm of the sleepwalk logic,
+ * as well as capture the configuration of the USB2.0 pad
+ */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_TRIGGERS);
+ reg |= (UTMIP_CLR_WALK_PTR(port) | UTMIP_CLR_WAKE_ALARM(port) |
+ UTMIP_CAP_CFG(port));
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_TRIGGERS);
+
+ /* program electrical parameters read from XUSB PADCTL */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_TERM_PAD_CFG);
+ reg &= ~(TCTRL_VAL(~0) | PCTRL_VAL(~0));
+ reg |= (TCTRL_VAL(config->tctrl) | PCTRL_VAL(config->pctrl));
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_TERM_PAD_CFG);
+
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_PAD_CFGX(port));
+ reg &= ~RPD_CTRL_PX(~0);
+ reg |= RPD_CTRL_PX(config->rpd_ctrl);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_PAD_CFGX(port));
+
+ /* setup the pull-ups and pull-downs of the signals during the four
+ * stages of sleepwalk.
+ * if device is connected, program sleepwalk logic to maintain a J and
+ * keep driving K upon seeing remote wake.
+ */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_SLEEPWALK_PX(port));
+ reg = (UTMIP_USBOP_RPD_A | UTMIP_USBOP_RPD_B | UTMIP_USBOP_RPD_C |
+ UTMIP_USBOP_RPD_D);
+ reg |= (UTMIP_USBON_RPD_A | UTMIP_USBON_RPD_B | UTMIP_USBON_RPD_C |
+ UTMIP_USBON_RPD_D);
+ if (speed == USB_SPEED_UNKNOWN) {
+ reg |= (UTMIP_HIGHZ_A | UTMIP_HIGHZ_B | UTMIP_HIGHZ_C |
+ UTMIP_HIGHZ_D);
+ } else if ((speed == USB_SPEED_HIGH) || (speed == USB_SPEED_FULL)) {
+ /* J state: D+/D- = high/low, K state: D+/D- = low/high */
+ reg |= UTMIP_HIGHZ_A;
+ reg |= UTMIP_AP_A;
+ reg |= (UTMIP_AN_B | UTMIP_AN_C | UTMIP_AN_D);
+ } else if (speed == USB_SPEED_LOW) {
+ /* J state: D+/D- = low/high, K state: D+/D- = high/low */
+ reg |= UTMIP_HIGHZ_A;
+ reg |= UTMIP_AN_A;
+ reg |= (UTMIP_AP_B | UTMIP_AP_C | UTMIP_AP_D);
+ }
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_SLEEPWALK_PX(port));
+
+ /* power up the line state detectors of the pad */
+ reg = tegra_pmc_readl(pmc, PMC_USB_AO);
+ reg &= ~(USBOP_VAL_PD(port) | USBON_VAL_PD(port));
+ tegra_pmc_writel(pmc, reg, PMC_USB_AO);
+
+ usleep_range(50, 100);
+
+ /* switch the electric control of the USB2.0 pad to PMC */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+ reg |= (UTMIP_FSLS_USE_PMC(port) | UTMIP_PCTRL_USE_PMC(port) |
+ UTMIP_TCTRL_USE_PMC(port));
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SLEEP_CFG1);
+ reg |= (UTMIP_RPD_CTRL_USE_PMC_PX(port) |
+ UTMIP_RPU_SWITC_LOW_USE_PMC_PX(port));
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SLEEP_CFG1);
+
+ /* set the wake signaling trigger events */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+ reg &= ~UTMIP_WAKE_VAL(port, ~0);
+ reg |= UTMIP_WAKE_VAL_ANY(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+ /* enable the wake detection */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+ reg |= UTMIP_MASTER_ENABLE(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+ reg |= UTMIP_LINE_WAKEUP_EN(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_pmc_utmi_phy_enable_sleepwalk);
+
+int tegra_pmc_utmi_phy_disable_sleepwalk(int port)
+{
+ u32 reg;
+
+ pr_debug("PMC %s : port %d\n", __func__, port);
+
+ /* disable the wake detection */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+ reg &= ~UTMIP_MASTER_ENABLE(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+ reg &= ~UTMIP_LINE_WAKEUP_EN(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+ /* switch the electric control of the USB2.0 pad to XUSB or USB2 */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+ reg &= ~(UTMIP_FSLS_USE_PMC(port) | UTMIP_PCTRL_USE_PMC(port) |
+ UTMIP_TCTRL_USE_PMC(port));
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SLEEP_CFG1);
+ reg &= ~(UTMIP_RPD_CTRL_USE_PMC_PX(port) |
+ UTMIP_RPU_SWITC_LOW_USE_PMC_PX(port));
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SLEEP_CFG1);
+
+ /* disable wake event triggers of sleepwalk logic */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+ reg &= ~UTMIP_WAKE_VAL(port, ~0);
+ reg |= UTMIP_WAKE_VAL_NONE(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_SLEEP_CFG(port));
+
+ /* power down the line state detectors of the port */
+ reg = tegra_pmc_readl(pmc, PMC_USB_AO);
+ reg |= (USBOP_VAL_PD(port) | USBON_VAL_PD(port));
+ tegra_pmc_writel(pmc, reg, PMC_USB_AO);
+
+ /* clear alarm of the sleepwalk logic */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_TRIGGERS);
+ reg |= UTMIP_CLR_WAKE_ALARM(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_TRIGGERS);
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_pmc_utmi_phy_disable_sleepwalk);
+
+int tegra_pmc_hsic_phy_enable_sleepwalk(int port)
+{
+ u32 reg;
+
+ pr_debug("PMC %s : port %dn", __func__, port);
+
+ /* ensure sleepwalk logic is disabled */
+ reg = tegra_pmc_readl(pmc, PMC_UHSIC_SLEEP_CFG);
+ reg &= ~UHSIC_MASTER_ENABLE;
+ tegra_pmc_writel(pmc, reg, PMC_UHSIC_SLEEP_CFG);
+
+ /* ensure sleepwalk logics are in low power mode */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_MASTER_CONFIG);
+ reg |= UHSIC_PWR(port);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_MASTER_CONFIG);
+
+ /* set debounce time */
+ reg = tegra_pmc_readl(pmc, PMC_USB_DEBOUNCE_DEL);
+ reg &= ~UHSIC_LINE_DEB_CNT(~0);
+ reg |= UHSIC_LINE_DEB_CNT(0x1);
+ tegra_pmc_writel(pmc, reg, PMC_USB_DEBOUNCE_DEL);
+
+ /* ensure fake events of sleepwalk logic are desiabled */
+ reg = tegra_pmc_readl(pmc, PMC_UHSIC_FAKE);
+ reg &= ~(UHSIC_FAKE_STROBE_VAL | UHSIC_FAKE_DATA_VAL |
+ UHSIC_FAKE_STROBE_EN | UHSIC_FAKE_DATA_EN);
+ tegra_pmc_writel(pmc, reg, PMC_UHSIC_FAKE);
+
+ /* ensure wake events of sleepwalk logic are not latched */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+ reg &= ~UHSIC_LINE_WAKEUP_EN;
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+ /* disable wake event triggers of sleepwalk logic */
+ reg = tegra_pmc_readl(pmc, PMC_UHSIC_SLEEP_CFG);
+ reg &= ~UHSIC_WAKE_VAL(~0);
+ reg |= UHSIC_WAKE_VAL_NONE;
+ tegra_pmc_writel(pmc, reg, PMC_UHSIC_SLEEP_CFG);
+
+ /* power down the line state detectors of the port */
+ reg = tegra_pmc_readl(pmc, PMC_USB_AO);
+ reg |= (STROBE_VAL_PD(port) | DATA0_VAL_PD(port) | DATA1_VAL_PD);
+ tegra_pmc_writel(pmc, reg, PMC_USB_AO);
+
+ /* save state, HSIC always comes up as HS */
+ reg = tegra_pmc_readl(pmc, PMC_UHSIC_SAVED_STATE);
+ reg &= ~UHSIC_MODE(~0);
+ reg |= UHSIC_HS;
+ tegra_pmc_writel(pmc, reg, PMC_UHSIC_SAVED_STATE);
+
+ /* enable the trigger of the sleepwalk logic */
+ reg = tegra_pmc_readl(pmc, PMC_UHSIC_SLEEPWALK_CFG);
+ reg |= (UHSIC_WAKE_WALK_EN | UHSIC_LINEVAL_WALK_EN);
+ tegra_pmc_writel(pmc, reg, PMC_UHSIC_SLEEPWALK_CFG);
+
+ /* reset the walk pointer and clear the alarm of the sleepwalk logic,
+ * as well as capture the configuration of the USB2.0 port
+ */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_TRIGGERS);
+ reg |= (UHSIC_CLR_WALK_PTR | UHSIC_CLR_WAKE_ALARM);
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_TRIGGERS);
+
+ /* setup the pull-ups and pull-downs of the signals during the four
+ * stages of sleepwalk.
+ * maintain a HSIC IDLE and keep driving HSIC RESUME upon remote wake
+ */
+ reg = tegra_pmc_readl(pmc, PMC_UHSIC_SLEEPWALK_P0);
+ reg = (UHSIC_DATA0_RPD_A | UHSIC_DATA0_RPU_B | UHSIC_DATA0_RPU_C |
+ UHSIC_DATA0_RPU_D);
+ reg |= (UHSIC_STROBE_RPU_A | UHSIC_STROBE_RPD_B | UHSIC_STROBE_RPD_C |
+ UHSIC_STROBE_RPD_D);
+ tegra_pmc_writel(pmc, reg, PMC_UHSIC_SLEEPWALK_P0);
+
+ /* power up the line state detectors of the port */
+ reg = tegra_pmc_readl(pmc, PMC_USB_AO);
+ reg &= ~(STROBE_VAL_PD(port) | DATA0_VAL_PD(port) | DATA1_VAL_PD);
+ tegra_pmc_writel(pmc, reg, PMC_USB_AO);
+
+ usleep_range(50, 100);
+
+ /* set the wake signaling trigger events */
+ reg = tegra_pmc_readl(pmc, PMC_UHSIC_SLEEP_CFG);
+ reg &= ~UHSIC_WAKE_VAL(~0);
+ reg |= UHSIC_WAKE_VAL_SD10;
+ tegra_pmc_writel(pmc, reg, PMC_UHSIC_SLEEP_CFG);
+
+ /* enable the wake detection */
+ reg = tegra_pmc_readl(pmc, PMC_UHSIC_SLEEP_CFG);
+ reg |= UHSIC_MASTER_ENABLE;
+ tegra_pmc_writel(pmc, reg, PMC_UHSIC_SLEEP_CFG);
+
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+ reg |= UHSIC_LINE_WAKEUP_EN;
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_pmc_hsic_phy_enable_sleepwalk);
+
+int tegra_pmc_hsic_phy_disable_sleepwalk(int port)
+{
+ u32 reg;
+
+ pr_debug("PMC %s : port %dn", __func__, port);
+
+ /* disable the wake detection */
+ reg = tegra_pmc_readl(pmc, PMC_UHSIC_SLEEP_CFG);
+ reg &= ~UHSIC_MASTER_ENABLE;
+ tegra_pmc_writel(pmc, reg, PMC_UHSIC_SLEEP_CFG);
+
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+ reg &= ~UHSIC_LINE_WAKEUP_EN;
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_LINE_WAKEUP);
+
+ /* disable wake event triggers of sleepwalk logic */
+ reg = tegra_pmc_readl(pmc, PMC_UHSIC_SLEEP_CFG);
+ reg &= ~UHSIC_WAKE_VAL(~0);
+ reg |= UHSIC_WAKE_VAL_NONE;
+ tegra_pmc_writel(pmc, reg, PMC_UHSIC_SLEEP_CFG);
+
+ /* power down the line state detectors of the port */
+ reg = tegra_pmc_readl(pmc, PMC_USB_AO);
+ reg |= (STROBE_VAL_PD(port) | DATA0_VAL_PD(port) | DATA1_VAL_PD);
+ tegra_pmc_writel(pmc, reg, PMC_USB_AO);
+
+ /* clear alarm of the sleepwalk logic */
+ reg = tegra_pmc_readl(pmc, PMC_UTMIP_UHSIC_TRIGGERS);
+ reg |= UHSIC_CLR_WAKE_ALARM;
+ tegra_pmc_writel(pmc, reg, PMC_UTMIP_UHSIC_TRIGGERS);
+
+ return 0;
+}
+EXPORT_SYMBOL(tegra_pmc_hsic_phy_disable_sleepwalk);
+
/**
* tegra_powergate_power_on() - power on partition
* @id: partition ID
@@ -11,6 +11,7 @@
#define __SOC_TEGRA_PMC_H__
#include <linux/reboot.h>
+#include <linux/usb/ch9.h>
#include <soc/tegra/pm.h>
@@ -171,6 +172,18 @@ enum tegra_suspend_mode tegra_pmc_get_suspend_mode(void);
void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode);
void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode);
+/* T210 USB2 SLEEPWALK APIs */
+struct tegra_utmi_pad_config {
+ u32 tctrl;
+ u32 pctrl;
+ u32 rpd_ctrl;
+};
+int tegra_pmc_utmi_phy_enable_sleepwalk(int port, enum usb_device_speed speed,
+ struct tegra_utmi_pad_config *config);
+int tegra_pmc_utmi_phy_disable_sleepwalk(int port);
+int tegra_pmc_hsic_phy_enable_sleepwalk(int port);
+int tegra_pmc_hsic_phy_disable_sleepwalk(int port);
+
#else
static inline int tegra_powergate_power_on(unsigned int id)
{
This commit implements Tegra210 PMC USB 2.0 (UTMI and HSIC) Sleepwalk programming sequence. With Sleepwalk enabled, XUSB host controller can be put into ELPG (Engine Level PowerGate) state when controller is idle to save power. The Sleepwalk logic is in charge of wake event detection and maintain resume signal accordingly till XUSB host controller is bring out of ELPG. Signed-off-by: JC Kuo <jckuo@nvidia.com> --- drivers/soc/tegra/pmc.c | 462 ++++++++++++++++++++++++++++++++++++++++ include/soc/tegra/pmc.h | 13 ++ 2 files changed, 475 insertions(+)