| Message ID | 20190704131033.9919-3-gmazyland@gmail.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Mike Snitzer |
| Headers | show |
| Series | [1/3] dm-crypt: Wipe private IV struct after key invalid flag is set. | expand |
Hi Herbert, I have a question about the crypto_cipher API in dm-crypt: We are apparently trying to deprecate cryto_cipher API (see the ESSIV patchset), but I am not sure what API now should be used instead. See the patch below - all we need is to one block encryption for IV. This algorithm makes sense only for FDE (old compatible Bitlocker devices), I really do not want this to be shared in some crypto module... What API should I use here? Sync skcipher? Is the crypto_cipher API really a problem in this case? Thanks, Milan On 04/07/2019 15:10, Milan Broz wrote: > This IV is used in some BitLocker devices with CBC encryption mode. > > NOTE: maybe we need to use another crypto API if the bare cipher > API is going to be deprecated. > > Signed-off-by: Milan Broz <gmazyland@gmail.com> > --- > drivers/md/dm-crypt.c | 82 ++++++++++++++++++++++++++++++++++++++++++- > 1 file changed, 81 insertions(+), 1 deletion(-) > > diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c > index 96ead4492787..a5ffa1ac6a28 100644 > --- a/drivers/md/dm-crypt.c > +++ b/drivers/md/dm-crypt.c > @@ -120,6 +120,10 @@ struct iv_tcw_private { > u8 *whitening; > }; > > +struct iv_eboiv_private { > + struct crypto_cipher *tfm; > +}; > + > /* > * Crypt: maps a linear range of a block device > * and encrypts / decrypts at the same time. > @@ -159,6 +163,7 @@ struct crypt_config { > struct iv_benbi_private benbi; > struct iv_lmk_private lmk; > struct iv_tcw_private tcw; > + struct iv_eboiv_private eboiv; > } iv_gen_private; > u64 iv_offset; > unsigned int iv_size; > @@ -290,6 +295,10 @@ static struct crypto_aead *any_tfm_aead(struct crypt_config *cc) > * is calculated from initial key, sector number and mixed using CRC32. > * Note that this encryption scheme is vulnerable to watermarking attacks > * and should be used for old compatible containers access only. > + * > + * eboiv: Encrypted byte-offset IV (used in Bitlocker in CBC mode) > + * The IV is encrypted little-endian byte-offset (with the same key > + * and cipher as the volume). > */ > > static int crypt_iv_plain_gen(struct crypt_config *cc, u8 *iv, > @@ -838,6 +847,67 @@ static int crypt_iv_random_gen(struct crypt_config *cc, u8 *iv, > return 0; > } > > +static void crypt_iv_eboiv_dtr(struct crypt_config *cc) > +{ > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > + > + crypto_free_cipher(eboiv->tfm); > + eboiv->tfm = NULL; > +} > + > +static int crypt_iv_eboiv_ctr(struct crypt_config *cc, struct dm_target *ti, > + const char *opts) > +{ > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > + struct crypto_cipher *tfm; > + > + tfm = crypto_alloc_cipher(cc->cipher, 0, 0); > + if (IS_ERR(tfm)) { > + ti->error = "Error allocating crypto tfm for EBOIV"; > + return PTR_ERR(tfm); > + } > + > + if (crypto_cipher_blocksize(tfm) != cc->iv_size) { > + ti->error = "Block size of EBOIV cipher does " > + "not match IV size of block cipher"; > + crypto_free_cipher(tfm); > + return -EINVAL; > + } > + > + eboiv->tfm = tfm; > + return 0; > +} > + > +static int crypt_iv_eboiv_init(struct crypt_config *cc) > +{ > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > + int err; > + > + err = crypto_cipher_setkey(eboiv->tfm, cc->key, cc->key_size); > + if (err) > + return err; > + > + return 0; > +} > + > +static int crypt_iv_eboiv_wipe(struct crypt_config *cc) > +{ > + /* Called after cc->key is set to random key in crypt_wipe() */ > + return crypt_iv_eboiv_init(cc); > +} > + > +static int crypt_iv_eboiv_gen(struct crypt_config *cc, u8 *iv, > + struct dm_crypt_request *dmreq) > +{ > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > + > + memset(iv, 0, cc->iv_size); > + *(__le64 *)iv = cpu_to_le64(dmreq->iv_sector * cc->sector_size); > + crypto_cipher_encrypt_one(eboiv->tfm, iv, iv); > + > + return 0; > +} > + > static const struct crypt_iv_operations crypt_iv_plain_ops = { > .generator = crypt_iv_plain_gen > }; > @@ -890,6 +960,14 @@ static struct crypt_iv_operations crypt_iv_random_ops = { > .generator = crypt_iv_random_gen > }; > > +static struct crypt_iv_operations crypt_iv_eboiv_ops = { > + .ctr = crypt_iv_eboiv_ctr, > + .dtr = crypt_iv_eboiv_dtr, > + .init = crypt_iv_eboiv_init, > + .wipe = crypt_iv_eboiv_wipe, > + .generator = crypt_iv_eboiv_gen > +}; > + > /* > * Integrity extensions > */ > @@ -2293,6 +2371,8 @@ static int crypt_ctr_ivmode(struct dm_target *ti, const char *ivmode) > cc->iv_gen_ops = &crypt_iv_benbi_ops; > else if (strcmp(ivmode, "null") == 0) > cc->iv_gen_ops = &crypt_iv_null_ops; > + else if (strcmp(ivmode, "eboiv") == 0) > + cc->iv_gen_ops = &crypt_iv_eboiv_ops; > else if (strcmp(ivmode, "lmk") == 0) { > cc->iv_gen_ops = &crypt_iv_lmk_ops; > /* > @@ -3093,7 +3173,7 @@ static void crypt_io_hints(struct dm_target *ti, struct queue_limits *limits) > > static struct target_type crypt_target = { > .name = "crypt", > - .version = {1, 18, 1}, > + .version = {1, 19, 0}, > .module = THIS_MODULE, > .ctr = crypt_ctr, > .dtr = crypt_dtr, > -- dm-devel mailing list dm-devel@redhat.com https://www.redhat.com/mailman/listinfo/dm-devel
(+ Eric) On Thu, 4 Jul 2019 at 15:29, Milan Broz <gmazyland@gmail.com> wrote: > > Hi Herbert, > > I have a question about the crypto_cipher API in dm-crypt: > > We are apparently trying to deprecate cryto_cipher API (see the ESSIV patchset), > but I am not sure what API now should be used instead. > Not precisely - what I would like to do is to make the cipher part of the internal crypto API. The reason is that there are too many occurrences where non-trivial chaining modes have been cobbled together from the cipher API. > See the patch below - all we need is to one block encryption for IV. > > This algorithm makes sense only for FDE (old compatible Bitlocker devices), > I really do not want this to be shared in some crypto module... > > What API should I use here? Sync skcipher? Is the crypto_cipher API > really a problem in this case? > Are arbitrary ciphers supported? Or are you only interested in AES? In the former case, I'd suggest the sync skcipher API to instantiate "ecb(%s)", otherwise, use the upcoming AES library interface. > On 04/07/2019 15:10, Milan Broz wrote: > > This IV is used in some BitLocker devices with CBC encryption mode. > > > > NOTE: maybe we need to use another crypto API if the bare cipher > > API is going to be deprecated. > > > > Signed-off-by: Milan Broz <gmazyland@gmail.com> > > --- > > drivers/md/dm-crypt.c | 82 ++++++++++++++++++++++++++++++++++++++++++- > > 1 file changed, 81 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c > > index 96ead4492787..a5ffa1ac6a28 100644 > > --- a/drivers/md/dm-crypt.c > > +++ b/drivers/md/dm-crypt.c > > @@ -120,6 +120,10 @@ struct iv_tcw_private { > > u8 *whitening; > > }; > > > > +struct iv_eboiv_private { > > + struct crypto_cipher *tfm; > > +}; > > + > > /* > > * Crypt: maps a linear range of a block device > > * and encrypts / decrypts at the same time. > > @@ -159,6 +163,7 @@ struct crypt_config { > > struct iv_benbi_private benbi; > > struct iv_lmk_private lmk; > > struct iv_tcw_private tcw; > > + struct iv_eboiv_private eboiv; > > } iv_gen_private; > > u64 iv_offset; > > unsigned int iv_size; > > @@ -290,6 +295,10 @@ static struct crypto_aead *any_tfm_aead(struct crypt_config *cc) > > * is calculated from initial key, sector number and mixed using CRC32. > > * Note that this encryption scheme is vulnerable to watermarking attacks > > * and should be used for old compatible containers access only. > > + * > > + * eboiv: Encrypted byte-offset IV (used in Bitlocker in CBC mode) > > + * The IV is encrypted little-endian byte-offset (with the same key > > + * and cipher as the volume). > > */ > > > > static int crypt_iv_plain_gen(struct crypt_config *cc, u8 *iv, > > @@ -838,6 +847,67 @@ static int crypt_iv_random_gen(struct crypt_config *cc, u8 *iv, > > return 0; > > } > > > > +static void crypt_iv_eboiv_dtr(struct crypt_config *cc) > > +{ > > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > > + > > + crypto_free_cipher(eboiv->tfm); > > + eboiv->tfm = NULL; > > +} > > + > > +static int crypt_iv_eboiv_ctr(struct crypt_config *cc, struct dm_target *ti, > > + const char *opts) > > +{ > > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > > + struct crypto_cipher *tfm; > > + > > + tfm = crypto_alloc_cipher(cc->cipher, 0, 0); > > + if (IS_ERR(tfm)) { > > + ti->error = "Error allocating crypto tfm for EBOIV"; > > + return PTR_ERR(tfm); > > + } > > + > > + if (crypto_cipher_blocksize(tfm) != cc->iv_size) { > > + ti->error = "Block size of EBOIV cipher does " > > + "not match IV size of block cipher"; > > + crypto_free_cipher(tfm); > > + return -EINVAL; > > + } > > + > > + eboiv->tfm = tfm; > > + return 0; > > +} > > + > > +static int crypt_iv_eboiv_init(struct crypt_config *cc) > > +{ > > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > > + int err; > > + > > + err = crypto_cipher_setkey(eboiv->tfm, cc->key, cc->key_size); > > + if (err) > > + return err; > > + > > + return 0; > > +} > > + > > +static int crypt_iv_eboiv_wipe(struct crypt_config *cc) > > +{ > > + /* Called after cc->key is set to random key in crypt_wipe() */ > > + return crypt_iv_eboiv_init(cc); > > +} > > + > > +static int crypt_iv_eboiv_gen(struct crypt_config *cc, u8 *iv, > > + struct dm_crypt_request *dmreq) > > +{ > > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > > + > > + memset(iv, 0, cc->iv_size); > > + *(__le64 *)iv = cpu_to_le64(dmreq->iv_sector * cc->sector_size); > > + crypto_cipher_encrypt_one(eboiv->tfm, iv, iv); > > + > > + return 0; > > +} > > + > > static const struct crypt_iv_operations crypt_iv_plain_ops = { > > .generator = crypt_iv_plain_gen > > }; > > @@ -890,6 +960,14 @@ static struct crypt_iv_operations crypt_iv_random_ops = { > > .generator = crypt_iv_random_gen > > }; > > > > +static struct crypt_iv_operations crypt_iv_eboiv_ops = { > > + .ctr = crypt_iv_eboiv_ctr, > > + .dtr = crypt_iv_eboiv_dtr, > > + .init = crypt_iv_eboiv_init, > > + .wipe = crypt_iv_eboiv_wipe, > > + .generator = crypt_iv_eboiv_gen > > +}; > > + > > /* > > * Integrity extensions > > */ > > @@ -2293,6 +2371,8 @@ static int crypt_ctr_ivmode(struct dm_target *ti, const char *ivmode) > > cc->iv_gen_ops = &crypt_iv_benbi_ops; > > else if (strcmp(ivmode, "null") == 0) > > cc->iv_gen_ops = &crypt_iv_null_ops; > > + else if (strcmp(ivmode, "eboiv") == 0) > > + cc->iv_gen_ops = &crypt_iv_eboiv_ops; > > else if (strcmp(ivmode, "lmk") == 0) { > > cc->iv_gen_ops = &crypt_iv_lmk_ops; > > /* > > @@ -3093,7 +3173,7 @@ static void crypt_io_hints(struct dm_target *ti, struct queue_limits *limits) > > > > static struct target_type crypt_target = { > > .name = "crypt", > > - .version = {1, 18, 1}, > > + .version = {1, 19, 0}, > > .module = THIS_MODULE, > > .ctr = crypt_ctr, > > .dtr = crypt_dtr, > > -- dm-devel mailing list dm-devel@redhat.com https://www.redhat.com/mailman/listinfo/dm-devel
On Thu, 4 Jul 2019 at 16:28, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > > (+ Eric) > > On Thu, 4 Jul 2019 at 15:29, Milan Broz <gmazyland@gmail.com> wrote: > > > > Hi Herbert, > > > > I have a question about the crypto_cipher API in dm-crypt: > > > > We are apparently trying to deprecate cryto_cipher API (see the ESSIV patchset), > > but I am not sure what API now should be used instead. > > > > Not precisely - what I would like to do is to make the cipher part of > the internal crypto API. The reason is that there are too many > occurrences where non-trivial chaining modes have been cobbled > together from the cipher API. > > > See the patch below - all we need is to one block encryption for IV. > > > > This algorithm makes sense only for FDE (old compatible Bitlocker devices), > > I really do not want this to be shared in some crypto module... > > > > What API should I use here? Sync skcipher? Is the crypto_cipher API > > really a problem in this case? > > > > Are arbitrary ciphers supported? Or are you only interested in AES? In > the former case, I'd suggest the sync skcipher API to instantiate > "ecb(%s)", otherwise, use the upcoming AES library interface. > Actually, if CBC is the only supported mode, you could also use the skcipher itself to encrypt a single block of input (just encrypt the IV using CBC but with an IV of all zeroes) > > On 04/07/2019 15:10, Milan Broz wrote: > > > This IV is used in some BitLocker devices with CBC encryption mode. > > > > > > NOTE: maybe we need to use another crypto API if the bare cipher > > > API is going to be deprecated. > > > > > > Signed-off-by: Milan Broz <gmazyland@gmail.com> > > > --- > > > drivers/md/dm-crypt.c | 82 ++++++++++++++++++++++++++++++++++++++++++- > > > 1 file changed, 81 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c > > > index 96ead4492787..a5ffa1ac6a28 100644 > > > --- a/drivers/md/dm-crypt.c > > > +++ b/drivers/md/dm-crypt.c > > > @@ -120,6 +120,10 @@ struct iv_tcw_private { > > > u8 *whitening; > > > }; > > > > > > +struct iv_eboiv_private { > > > + struct crypto_cipher *tfm; > > > +}; > > > + > > > /* > > > * Crypt: maps a linear range of a block device > > > * and encrypts / decrypts at the same time. > > > @@ -159,6 +163,7 @@ struct crypt_config { > > > struct iv_benbi_private benbi; > > > struct iv_lmk_private lmk; > > > struct iv_tcw_private tcw; > > > + struct iv_eboiv_private eboiv; > > > } iv_gen_private; > > > u64 iv_offset; > > > unsigned int iv_size; > > > @@ -290,6 +295,10 @@ static struct crypto_aead *any_tfm_aead(struct crypt_config *cc) > > > * is calculated from initial key, sector number and mixed using CRC32. > > > * Note that this encryption scheme is vulnerable to watermarking attacks > > > * and should be used for old compatible containers access only. > > > + * > > > + * eboiv: Encrypted byte-offset IV (used in Bitlocker in CBC mode) > > > + * The IV is encrypted little-endian byte-offset (with the same key > > > + * and cipher as the volume). > > > */ > > > > > > static int crypt_iv_plain_gen(struct crypt_config *cc, u8 *iv, > > > @@ -838,6 +847,67 @@ static int crypt_iv_random_gen(struct crypt_config *cc, u8 *iv, > > > return 0; > > > } > > > > > > +static void crypt_iv_eboiv_dtr(struct crypt_config *cc) > > > +{ > > > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > > > + > > > + crypto_free_cipher(eboiv->tfm); > > > + eboiv->tfm = NULL; > > > +} > > > + > > > +static int crypt_iv_eboiv_ctr(struct crypt_config *cc, struct dm_target *ti, > > > + const char *opts) > > > +{ > > > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > > > + struct crypto_cipher *tfm; > > > + > > > + tfm = crypto_alloc_cipher(cc->cipher, 0, 0); > > > + if (IS_ERR(tfm)) { > > > + ti->error = "Error allocating crypto tfm for EBOIV"; > > > + return PTR_ERR(tfm); > > > + } > > > + > > > + if (crypto_cipher_blocksize(tfm) != cc->iv_size) { > > > + ti->error = "Block size of EBOIV cipher does " > > > + "not match IV size of block cipher"; > > > + crypto_free_cipher(tfm); > > > + return -EINVAL; > > > + } > > > + > > > + eboiv->tfm = tfm; > > > + return 0; > > > +} > > > + > > > +static int crypt_iv_eboiv_init(struct crypt_config *cc) > > > +{ > > > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > > > + int err; > > > + > > > + err = crypto_cipher_setkey(eboiv->tfm, cc->key, cc->key_size); > > > + if (err) > > > + return err; > > > + > > > + return 0; > > > +} > > > + > > > +static int crypt_iv_eboiv_wipe(struct crypt_config *cc) > > > +{ > > > + /* Called after cc->key is set to random key in crypt_wipe() */ > > > + return crypt_iv_eboiv_init(cc); > > > +} > > > + > > > +static int crypt_iv_eboiv_gen(struct crypt_config *cc, u8 *iv, > > > + struct dm_crypt_request *dmreq) > > > +{ > > > + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > > > + > > > + memset(iv, 0, cc->iv_size); > > > + *(__le64 *)iv = cpu_to_le64(dmreq->iv_sector * cc->sector_size); > > > + crypto_cipher_encrypt_one(eboiv->tfm, iv, iv); > > > + > > > + return 0; > > > +} > > > + > > > static const struct crypt_iv_operations crypt_iv_plain_ops = { > > > .generator = crypt_iv_plain_gen > > > }; > > > @@ -890,6 +960,14 @@ static struct crypt_iv_operations crypt_iv_random_ops = { > > > .generator = crypt_iv_random_gen > > > }; > > > > > > +static struct crypt_iv_operations crypt_iv_eboiv_ops = { > > > + .ctr = crypt_iv_eboiv_ctr, > > > + .dtr = crypt_iv_eboiv_dtr, > > > + .init = crypt_iv_eboiv_init, > > > + .wipe = crypt_iv_eboiv_wipe, > > > + .generator = crypt_iv_eboiv_gen > > > +}; > > > + > > > /* > > > * Integrity extensions > > > */ > > > @@ -2293,6 +2371,8 @@ static int crypt_ctr_ivmode(struct dm_target *ti, const char *ivmode) > > > cc->iv_gen_ops = &crypt_iv_benbi_ops; > > > else if (strcmp(ivmode, "null") == 0) > > > cc->iv_gen_ops = &crypt_iv_null_ops; > > > + else if (strcmp(ivmode, "eboiv") == 0) > > > + cc->iv_gen_ops = &crypt_iv_eboiv_ops; > > > else if (strcmp(ivmode, "lmk") == 0) { > > > cc->iv_gen_ops = &crypt_iv_lmk_ops; > > > /* > > > @@ -3093,7 +3173,7 @@ static void crypt_io_hints(struct dm_target *ti, struct queue_limits *limits) > > > > > > static struct target_type crypt_target = { > > > .name = "crypt", > > > - .version = {1, 18, 1}, > > > + .version = {1, 19, 0}, > > > .module = THIS_MODULE, > > > .ctr = crypt_ctr, > > > .dtr = crypt_dtr, > > > -- dm-devel mailing list dm-devel@redhat.com https://www.redhat.com/mailman/listinfo/dm-devel
On 04/07/2019 16:30, Ard Biesheuvel wrote: > On Thu, 4 Jul 2019 at 16:28, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: >> >> (+ Eric) >> >> On Thu, 4 Jul 2019 at 15:29, Milan Broz <gmazyland@gmail.com> wrote: >>> >>> Hi Herbert, >>> >>> I have a question about the crypto_cipher API in dm-crypt: >>> >>> We are apparently trying to deprecate cryto_cipher API (see the ESSIV patchset), >>> but I am not sure what API now should be used instead. >>> >> >> Not precisely - what I would like to do is to make the cipher part of >> the internal crypto API. The reason is that there are too many >> occurrences where non-trivial chaining modes have been cobbled >> together from the cipher API. Well, in the ESSIV case I understand there are two in-kernel users, so it makes perfect sense to use common crypto API implementation. For the rest, I perhaps still do not understand the reason to move this API to "internal only" state. (I am sure people will find an another way to to construct crazy things, even if they are forced to use skcipher API. 8-) >>> See the patch below - all we need is to one block encryption for IV. >>> >>> This algorithm makes sense only for FDE (old compatible Bitlocker devices), >>> I really do not want this to be shared in some crypto module... >>> >>> What API should I use here? Sync skcipher? Is the crypto_cipher API >>> really a problem in this case? >>> >> >> Are arbitrary ciphers supported? Or are you only interested in AES? In >> the former case, I'd suggest the sync skcipher API to instantiate >> "ecb(%s)", otherwise, use the upcoming AES library interface. For the Bitlocker compatibility, it is only AES in CBC mode, but we usually do not limit IV use in dmcrypt. (We still need to solve the Bitlocker Elephant diffuser, but that's another issue.) > Actually, if CBC is the only supported mode, you could also use the > skcipher itself to encrypt a single block of input (just encrypt the > IV using CBC but with an IV of all zeroes) I can then use ECB skcipher directly (IOW use skcipher ecb(aes) for IV). (ECB mode must be present, because XTS is based on it anyway.) Why I am asking is that with sync skcipher it means allocation of request on stack - still more code than the patch I posted below. We can do that. But if the crypto_cipher API stays exported, I do not see any reason to write more complicated code. We (dmcrypt) are pretty sophisticated user of crypto API already :) Thanks, Milan > > >>> On 04/07/2019 15:10, Milan Broz wrote: >>>> This IV is used in some BitLocker devices with CBC encryption mode. >>>> >>>> NOTE: maybe we need to use another crypto API if the bare cipher >>>> API is going to be deprecated. >>>> >>>> Signed-off-by: Milan Broz <gmazyland@gmail.com> >>>> --- >>>> drivers/md/dm-crypt.c | 82 ++++++++++++++++++++++++++++++++++++++++++- >>>> 1 file changed, 81 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c >>>> index 96ead4492787..a5ffa1ac6a28 100644 >>>> --- a/drivers/md/dm-crypt.c >>>> +++ b/drivers/md/dm-crypt.c >>>> @@ -120,6 +120,10 @@ struct iv_tcw_private { >>>> u8 *whitening; >>>> }; >>>> >>>> +struct iv_eboiv_private { >>>> + struct crypto_cipher *tfm; >>>> +}; >>>> + >>>> /* >>>> * Crypt: maps a linear range of a block device >>>> * and encrypts / decrypts at the same time. >>>> @@ -159,6 +163,7 @@ struct crypt_config { >>>> struct iv_benbi_private benbi; >>>> struct iv_lmk_private lmk; >>>> struct iv_tcw_private tcw; >>>> + struct iv_eboiv_private eboiv; >>>> } iv_gen_private; >>>> u64 iv_offset; >>>> unsigned int iv_size; >>>> @@ -290,6 +295,10 @@ static struct crypto_aead *any_tfm_aead(struct crypt_config *cc) >>>> * is calculated from initial key, sector number and mixed using CRC32. >>>> * Note that this encryption scheme is vulnerable to watermarking attacks >>>> * and should be used for old compatible containers access only. >>>> + * >>>> + * eboiv: Encrypted byte-offset IV (used in Bitlocker in CBC mode) >>>> + * The IV is encrypted little-endian byte-offset (with the same key >>>> + * and cipher as the volume). >>>> */ >>>> >>>> static int crypt_iv_plain_gen(struct crypt_config *cc, u8 *iv, >>>> @@ -838,6 +847,67 @@ static int crypt_iv_random_gen(struct crypt_config *cc, u8 *iv, >>>> return 0; >>>> } >>>> >>>> +static void crypt_iv_eboiv_dtr(struct crypt_config *cc) >>>> +{ >>>> + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; >>>> + >>>> + crypto_free_cipher(eboiv->tfm); >>>> + eboiv->tfm = NULL; >>>> +} >>>> + >>>> +static int crypt_iv_eboiv_ctr(struct crypt_config *cc, struct dm_target *ti, >>>> + const char *opts) >>>> +{ >>>> + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; >>>> + struct crypto_cipher *tfm; >>>> + >>>> + tfm = crypto_alloc_cipher(cc->cipher, 0, 0); >>>> + if (IS_ERR(tfm)) { >>>> + ti->error = "Error allocating crypto tfm for EBOIV"; >>>> + return PTR_ERR(tfm); >>>> + } >>>> + >>>> + if (crypto_cipher_blocksize(tfm) != cc->iv_size) { >>>> + ti->error = "Block size of EBOIV cipher does " >>>> + "not match IV size of block cipher"; >>>> + crypto_free_cipher(tfm); >>>> + return -EINVAL; >>>> + } >>>> + >>>> + eboiv->tfm = tfm; >>>> + return 0; >>>> +} >>>> + >>>> +static int crypt_iv_eboiv_init(struct crypt_config *cc) >>>> +{ >>>> + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; >>>> + int err; >>>> + >>>> + err = crypto_cipher_setkey(eboiv->tfm, cc->key, cc->key_size); >>>> + if (err) >>>> + return err; >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +static int crypt_iv_eboiv_wipe(struct crypt_config *cc) >>>> +{ >>>> + /* Called after cc->key is set to random key in crypt_wipe() */ >>>> + return crypt_iv_eboiv_init(cc); >>>> +} >>>> + >>>> +static int crypt_iv_eboiv_gen(struct crypt_config *cc, u8 *iv, >>>> + struct dm_crypt_request *dmreq) >>>> +{ >>>> + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; >>>> + >>>> + memset(iv, 0, cc->iv_size); >>>> + *(__le64 *)iv = cpu_to_le64(dmreq->iv_sector * cc->sector_size); >>>> + crypto_cipher_encrypt_one(eboiv->tfm, iv, iv); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> static const struct crypt_iv_operations crypt_iv_plain_ops = { >>>> .generator = crypt_iv_plain_gen >>>> }; >>>> @@ -890,6 +960,14 @@ static struct crypt_iv_operations crypt_iv_random_ops = { >>>> .generator = crypt_iv_random_gen >>>> }; >>>> >>>> +static struct crypt_iv_operations crypt_iv_eboiv_ops = { >>>> + .ctr = crypt_iv_eboiv_ctr, >>>> + .dtr = crypt_iv_eboiv_dtr, >>>> + .init = crypt_iv_eboiv_init, >>>> + .wipe = crypt_iv_eboiv_wipe, >>>> + .generator = crypt_iv_eboiv_gen >>>> +}; >>>> + >>>> /* >>>> * Integrity extensions >>>> */ >>>> @@ -2293,6 +2371,8 @@ static int crypt_ctr_ivmode(struct dm_target *ti, const char *ivmode) >>>> cc->iv_gen_ops = &crypt_iv_benbi_ops; >>>> else if (strcmp(ivmode, "null") == 0) >>>> cc->iv_gen_ops = &crypt_iv_null_ops; >>>> + else if (strcmp(ivmode, "eboiv") == 0) >>>> + cc->iv_gen_ops = &crypt_iv_eboiv_ops; >>>> else if (strcmp(ivmode, "lmk") == 0) { >>>> cc->iv_gen_ops = &crypt_iv_lmk_ops; >>>> /* >>>> @@ -3093,7 +3173,7 @@ static void crypt_io_hints(struct dm_target *ti, struct queue_limits *limits) >>>> >>>> static struct target_type crypt_target = { >>>> .name = "crypt", >>>> - .version = {1, 18, 1}, >>>> + .version = {1, 19, 0}, >>>> .module = THIS_MODULE, >>>> .ctr = crypt_ctr, >>>> .dtr = crypt_dtr, >>>> -- dm-devel mailing list dm-devel@redhat.com https://www.redhat.com/mailman/listinfo/dm-devel
On Thu, 4 Jul 2019 at 19:45, Milan Broz <gmazyland@gmail.com> wrote: > > On 04/07/2019 16:30, Ard Biesheuvel wrote: > > On Thu, 4 Jul 2019 at 16:28, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > >> > >> (+ Eric) > >> > >> On Thu, 4 Jul 2019 at 15:29, Milan Broz <gmazyland@gmail.com> wrote: > >>> > >>> Hi Herbert, > >>> > >>> I have a question about the crypto_cipher API in dm-crypt: > >>> > >>> We are apparently trying to deprecate cryto_cipher API (see the ESSIV patchset), > >>> but I am not sure what API now should be used instead. > >>> > >> > >> Not precisely - what I would like to do is to make the cipher part of > >> the internal crypto API. The reason is that there are too many > >> occurrences where non-trivial chaining modes have been cobbled > >> together from the cipher API. > > Well, in the ESSIV case I understand there are two in-kernel users, so it makes > perfect sense to use common crypto API implementation. > > For the rest, I perhaps still do not understand the reason to move this API > to "internal only" state. > > (I am sure people will find an another way to to construct crazy things, > even if they are forced to use skcipher API. 8-) > True To be clear, making the cipher API internal only is something that I am proposing but hasn't been widely discussed yet. So if you make a good argument why it is a terrible idea, I'm sure it will be taken into account. The main issue is that the cipher API is suboptimal if you process many blocks in sequence, since SIMD implementations will not be able to amortize the cost of kernel_fpu_begin()/end(). This is something that we might be able to fix in other ways (and a SIMD get/put interface has already been proposed which looks suitable for this as well) but that would still involve an API change for something that isn't the correct abstraction in the first place in many cases. (There are multiple implementations of ccm(aes) using cipher_encrypt_one() in a loop, for instance, and these are not able to benefit from, e.g, the accelerated implementation that I created for arm64, since it open codes the CCM operations) > >>> See the patch below - all we need is to one block encryption for IV. > >>> > >>> This algorithm makes sense only for FDE (old compatible Bitlocker devices), > >>> I really do not want this to be shared in some crypto module... > >>> > >>> What API should I use here? Sync skcipher? Is the crypto_cipher API > >>> really a problem in this case? > >>> > >> > >> Are arbitrary ciphers supported? Or are you only interested in AES? In > >> the former case, I'd suggest the sync skcipher API to instantiate > >> "ecb(%s)", otherwise, use the upcoming AES library interface. > > For the Bitlocker compatibility, it is only AES in CBC mode, but we usually do > not limit IV use in dmcrypt. Why on earth would you implement eboiv for compatibility purposes, and then allow it to be used in random other combinations? Pushing back on the use of arbitrary cipher cocktails is one of the reasons I'd prefer the cipher API to become crypto internal, since it is typically much better to stick with recommended combinations that are known to be secure/ > (We still need to solve the Bitlocker Elephant diffuser, but that's another issue.) > > > Actually, if CBC is the only supported mode, you could also use the > > skcipher itself to encrypt a single block of input (just encrypt the > > IV using CBC but with an IV of all zeroes) > > I can then use ECB skcipher directly (IOW use skcipher ecb(aes) for IV). > (ECB mode must be present, because XTS is based on it anyway.) > > Why I am asking is that with sync skcipher it means allocation of request > on stack - still more code than the patch I posted below. > That is a very good point, and something that I have been meaning to bring up myself: ever since we switched from [a]blkciphers so skciphers, we lost the ability to operate synchronously on virtual addresses, like we still have with shashes (as opposed to ahashes) today. AEADs suffer from the same limitation. The thing is, while switching to the cipher API does work around that, it is not a proper fix, and going forward, we should really address the above limitation in a sane way. > We can do that. But if the crypto_cipher API stays exported, I do not see any > reason to write more complicated code. > > We (dmcrypt) are pretty sophisticated user of crypto API already :) > That is absolutely true. In summary, I think implementing eboiv for arbitrary ciphers would be a mistake, since it is a mode that is intended for compatibility. However, if you do, I think going with the cipher API for now is fine, since you are using it in a sane way (i.e., to encrypt a single block of plaintext with an a priori unknown cipher). If it ever becomes an internal-only crypto API, we'll propose something else by that time. > > > > > >>> On 04/07/2019 15:10, Milan Broz wrote: > >>>> This IV is used in some BitLocker devices with CBC encryption mode. > >>>> > >>>> NOTE: maybe we need to use another crypto API if the bare cipher > >>>> API is going to be deprecated. > >>>> > >>>> Signed-off-by: Milan Broz <gmazyland@gmail.com> > >>>> --- > >>>> drivers/md/dm-crypt.c | 82 ++++++++++++++++++++++++++++++++++++++++++- > >>>> 1 file changed, 81 insertions(+), 1 deletion(-) > >>>> > >>>> diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c > >>>> index 96ead4492787..a5ffa1ac6a28 100644 > >>>> --- a/drivers/md/dm-crypt.c > >>>> +++ b/drivers/md/dm-crypt.c > >>>> @@ -120,6 +120,10 @@ struct iv_tcw_private { > >>>> u8 *whitening; > >>>> }; > >>>> > >>>> +struct iv_eboiv_private { > >>>> + struct crypto_cipher *tfm; > >>>> +}; > >>>> + > >>>> /* > >>>> * Crypt: maps a linear range of a block device > >>>> * and encrypts / decrypts at the same time. > >>>> @@ -159,6 +163,7 @@ struct crypt_config { > >>>> struct iv_benbi_private benbi; > >>>> struct iv_lmk_private lmk; > >>>> struct iv_tcw_private tcw; > >>>> + struct iv_eboiv_private eboiv; > >>>> } iv_gen_private; > >>>> u64 iv_offset; > >>>> unsigned int iv_size; > >>>> @@ -290,6 +295,10 @@ static struct crypto_aead *any_tfm_aead(struct crypt_config *cc) > >>>> * is calculated from initial key, sector number and mixed using CRC32. > >>>> * Note that this encryption scheme is vulnerable to watermarking attacks > >>>> * and should be used for old compatible containers access only. > >>>> + * > >>>> + * eboiv: Encrypted byte-offset IV (used in Bitlocker in CBC mode) > >>>> + * The IV is encrypted little-endian byte-offset (with the same key > >>>> + * and cipher as the volume). > >>>> */ > >>>> > >>>> static int crypt_iv_plain_gen(struct crypt_config *cc, u8 *iv, > >>>> @@ -838,6 +847,67 @@ static int crypt_iv_random_gen(struct crypt_config *cc, u8 *iv, > >>>> return 0; > >>>> } > >>>> > >>>> +static void crypt_iv_eboiv_dtr(struct crypt_config *cc) > >>>> +{ > >>>> + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > >>>> + > >>>> + crypto_free_cipher(eboiv->tfm); > >>>> + eboiv->tfm = NULL; > >>>> +} > >>>> + > >>>> +static int crypt_iv_eboiv_ctr(struct crypt_config *cc, struct dm_target *ti, > >>>> + const char *opts) > >>>> +{ > >>>> + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > >>>> + struct crypto_cipher *tfm; > >>>> + > >>>> + tfm = crypto_alloc_cipher(cc->cipher, 0, 0); > >>>> + if (IS_ERR(tfm)) { > >>>> + ti->error = "Error allocating crypto tfm for EBOIV"; > >>>> + return PTR_ERR(tfm); > >>>> + } > >>>> + > >>>> + if (crypto_cipher_blocksize(tfm) != cc->iv_size) { > >>>> + ti->error = "Block size of EBOIV cipher does " > >>>> + "not match IV size of block cipher"; > >>>> + crypto_free_cipher(tfm); > >>>> + return -EINVAL; > >>>> + } > >>>> + > >>>> + eboiv->tfm = tfm; > >>>> + return 0; > >>>> +} > >>>> + > >>>> +static int crypt_iv_eboiv_init(struct crypt_config *cc) > >>>> +{ > >>>> + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > >>>> + int err; > >>>> + > >>>> + err = crypto_cipher_setkey(eboiv->tfm, cc->key, cc->key_size); > >>>> + if (err) > >>>> + return err; > >>>> + > >>>> + return 0; > >>>> +} > >>>> + > >>>> +static int crypt_iv_eboiv_wipe(struct crypt_config *cc) > >>>> +{ > >>>> + /* Called after cc->key is set to random key in crypt_wipe() */ > >>>> + return crypt_iv_eboiv_init(cc); > >>>> +} > >>>> + > >>>> +static int crypt_iv_eboiv_gen(struct crypt_config *cc, u8 *iv, > >>>> + struct dm_crypt_request *dmreq) > >>>> +{ > >>>> + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; > >>>> + > >>>> + memset(iv, 0, cc->iv_size); > >>>> + *(__le64 *)iv = cpu_to_le64(dmreq->iv_sector * cc->sector_size); > >>>> + crypto_cipher_encrypt_one(eboiv->tfm, iv, iv); > >>>> + > >>>> + return 0; > >>>> +} > >>>> + > >>>> static const struct crypt_iv_operations crypt_iv_plain_ops = { > >>>> .generator = crypt_iv_plain_gen > >>>> }; > >>>> @@ -890,6 +960,14 @@ static struct crypt_iv_operations crypt_iv_random_ops = { > >>>> .generator = crypt_iv_random_gen > >>>> }; > >>>> > >>>> +static struct crypt_iv_operations crypt_iv_eboiv_ops = { > >>>> + .ctr = crypt_iv_eboiv_ctr, > >>>> + .dtr = crypt_iv_eboiv_dtr, > >>>> + .init = crypt_iv_eboiv_init, > >>>> + .wipe = crypt_iv_eboiv_wipe, > >>>> + .generator = crypt_iv_eboiv_gen > >>>> +}; > >>>> + > >>>> /* > >>>> * Integrity extensions > >>>> */ > >>>> @@ -2293,6 +2371,8 @@ static int crypt_ctr_ivmode(struct dm_target *ti, const char *ivmode) > >>>> cc->iv_gen_ops = &crypt_iv_benbi_ops; > >>>> else if (strcmp(ivmode, "null") == 0) > >>>> cc->iv_gen_ops = &crypt_iv_null_ops; > >>>> + else if (strcmp(ivmode, "eboiv") == 0) > >>>> + cc->iv_gen_ops = &crypt_iv_eboiv_ops; > >>>> else if (strcmp(ivmode, "lmk") == 0) { > >>>> cc->iv_gen_ops = &crypt_iv_lmk_ops; > >>>> /* > >>>> @@ -3093,7 +3173,7 @@ static void crypt_io_hints(struct dm_target *ti, struct queue_limits *limits) > >>>> > >>>> static struct target_type crypt_target = { > >>>> .name = "crypt", > >>>> - .version = {1, 18, 1}, > >>>> + .version = {1, 19, 0}, > >>>> .module = THIS_MODULE, > >>>> .ctr = crypt_ctr, > >>>> .dtr = crypt_dtr, > >>>> -- dm-devel mailing list dm-devel@redhat.com https://www.redhat.com/mailman/listinfo/dm-devel
On Thu, Jul 04, 2019 at 08:11:46PM +0200, Ard Biesheuvel wrote: > > To be clear, making the cipher API internal only is something that I > am proposing but hasn't been widely discussed yet. So if you make a > good argument why it is a terrible idea, I'm sure it will be taken > into account. > > The main issue is that the cipher API is suboptimal if you process > many blocks in sequence, since SIMD implementations will not be able > to amortize the cost of kernel_fpu_begin()/end(). This is something > that we might be able to fix in other ways (and a SIMD get/put > interface has already been proposed which looks suitable for this as > well) but that would still involve an API change for something that > isn't the correct abstraction in the first place in many cases. (There > are multiple implementations of ccm(aes) using cipher_encrypt_one() in > a loop, for instance, and these are not able to benefit from, e.g, > the accelerated implementation that I created for arm64, since it open > codes the CCM operations) I agree with what you guys have concluded so far. But I do have something I want to say about eboiv's implementation itself. AFAICS this is using the same key as the actual data. So why don't you combine it with the actual data when encrypting/decrypting? That is, add a block at the front of the actual data containing the little-endian byte offset and then use an IV of zero. Cheers,
On Fri, 5 Jul 2019 at 05:08, Herbert Xu <herbert@gondor.apana.org.au> wrote: > > On Thu, Jul 04, 2019 at 08:11:46PM +0200, Ard Biesheuvel wrote: > > > > To be clear, making the cipher API internal only is something that I > > am proposing but hasn't been widely discussed yet. So if you make a > > good argument why it is a terrible idea, I'm sure it will be taken > > into account. > > > > The main issue is that the cipher API is suboptimal if you process > > many blocks in sequence, since SIMD implementations will not be able > > to amortize the cost of kernel_fpu_begin()/end(). This is something > > that we might be able to fix in other ways (and a SIMD get/put > > interface has already been proposed which looks suitable for this as > > well) but that would still involve an API change for something that > > isn't the correct abstraction in the first place in many cases. (There > > are multiple implementations of ccm(aes) using cipher_encrypt_one() in > > a loop, for instance, and these are not able to benefit from, e.g, > > the accelerated implementation that I created for arm64, since it open > > codes the CCM operations) > > I agree with what you guys have concluded so far. But I do have > something I want to say about eboiv's implementation itself. > > AFAICS this is using the same key as the actual data. So why > don't you combine it with the actual data when encrypting/decrypting? > > That is, add a block at the front of the actual data containing > the little-endian byte offset and then use an IV of zero. > That would only work for encryption. -- dm-devel mailing list dm-devel@redhat.com https://www.redhat.com/mailman/listinfo/dm-devel
On Fri, Jul 05, 2019 at 08:32:03AM +0200, Ard Biesheuvel wrote: > > > AFAICS this is using the same key as the actual data. So why > > don't you combine it with the actual data when encrypting/decrypting? > > > > That is, add a block at the front of the actual data containing > > the little-endian byte offset and then use an IV of zero. > > > > That would only work for encryption. True. So this doesn't obviate the need to access the single-block cipher. But the code probably should still do it that way for encryption for performance reasons. Cheers,
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 96ead4492787..a5ffa1ac6a28 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -120,6 +120,10 @@ struct iv_tcw_private { u8 *whitening; }; +struct iv_eboiv_private { + struct crypto_cipher *tfm; +}; + /* * Crypt: maps a linear range of a block device * and encrypts / decrypts at the same time. @@ -159,6 +163,7 @@ struct crypt_config { struct iv_benbi_private benbi; struct iv_lmk_private lmk; struct iv_tcw_private tcw; + struct iv_eboiv_private eboiv; } iv_gen_private; u64 iv_offset; unsigned int iv_size; @@ -290,6 +295,10 @@ static struct crypto_aead *any_tfm_aead(struct crypt_config *cc) * is calculated from initial key, sector number and mixed using CRC32. * Note that this encryption scheme is vulnerable to watermarking attacks * and should be used for old compatible containers access only. + * + * eboiv: Encrypted byte-offset IV (used in Bitlocker in CBC mode) + * The IV is encrypted little-endian byte-offset (with the same key + * and cipher as the volume). */ static int crypt_iv_plain_gen(struct crypt_config *cc, u8 *iv, @@ -838,6 +847,67 @@ static int crypt_iv_random_gen(struct crypt_config *cc, u8 *iv, return 0; } +static void crypt_iv_eboiv_dtr(struct crypt_config *cc) +{ + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; + + crypto_free_cipher(eboiv->tfm); + eboiv->tfm = NULL; +} + +static int crypt_iv_eboiv_ctr(struct crypt_config *cc, struct dm_target *ti, + const char *opts) +{ + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; + struct crypto_cipher *tfm; + + tfm = crypto_alloc_cipher(cc->cipher, 0, 0); + if (IS_ERR(tfm)) { + ti->error = "Error allocating crypto tfm for EBOIV"; + return PTR_ERR(tfm); + } + + if (crypto_cipher_blocksize(tfm) != cc->iv_size) { + ti->error = "Block size of EBOIV cipher does " + "not match IV size of block cipher"; + crypto_free_cipher(tfm); + return -EINVAL; + } + + eboiv->tfm = tfm; + return 0; +} + +static int crypt_iv_eboiv_init(struct crypt_config *cc) +{ + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; + int err; + + err = crypto_cipher_setkey(eboiv->tfm, cc->key, cc->key_size); + if (err) + return err; + + return 0; +} + +static int crypt_iv_eboiv_wipe(struct crypt_config *cc) +{ + /* Called after cc->key is set to random key in crypt_wipe() */ + return crypt_iv_eboiv_init(cc); +} + +static int crypt_iv_eboiv_gen(struct crypt_config *cc, u8 *iv, + struct dm_crypt_request *dmreq) +{ + struct iv_eboiv_private *eboiv = &cc->iv_gen_private.eboiv; + + memset(iv, 0, cc->iv_size); + *(__le64 *)iv = cpu_to_le64(dmreq->iv_sector * cc->sector_size); + crypto_cipher_encrypt_one(eboiv->tfm, iv, iv); + + return 0; +} + static const struct crypt_iv_operations crypt_iv_plain_ops = { .generator = crypt_iv_plain_gen }; @@ -890,6 +960,14 @@ static struct crypt_iv_operations crypt_iv_random_ops = { .generator = crypt_iv_random_gen }; +static struct crypt_iv_operations crypt_iv_eboiv_ops = { + .ctr = crypt_iv_eboiv_ctr, + .dtr = crypt_iv_eboiv_dtr, + .init = crypt_iv_eboiv_init, + .wipe = crypt_iv_eboiv_wipe, + .generator = crypt_iv_eboiv_gen +}; + /* * Integrity extensions */ @@ -2293,6 +2371,8 @@ static int crypt_ctr_ivmode(struct dm_target *ti, const char *ivmode) cc->iv_gen_ops = &crypt_iv_benbi_ops; else if (strcmp(ivmode, "null") == 0) cc->iv_gen_ops = &crypt_iv_null_ops; + else if (strcmp(ivmode, "eboiv") == 0) + cc->iv_gen_ops = &crypt_iv_eboiv_ops; else if (strcmp(ivmode, "lmk") == 0) { cc->iv_gen_ops = &crypt_iv_lmk_ops; /* @@ -3093,7 +3173,7 @@ static void crypt_io_hints(struct dm_target *ti, struct queue_limits *limits) static struct target_type crypt_target = { .name = "crypt", - .version = {1, 18, 1}, + .version = {1, 19, 0}, .module = THIS_MODULE, .ctr = crypt_ctr, .dtr = crypt_dtr,
This IV is used in some BitLocker devices with CBC encryption mode. NOTE: maybe we need to use another crypto API if the bare cipher API is going to be deprecated. Signed-off-by: Milan Broz <gmazyland@gmail.com> --- drivers/md/dm-crypt.c | 82 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 81 insertions(+), 1 deletion(-)