| Message ID | 20190705165655.456-1-jeffrey.l.hugo@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Sharp panel option for Lenovo Miix 630 | expand |
Hi Jeffrey. On Fri, Jul 05, 2019 at 09:56:55AM -0700, Jeffrey Hugo wrote: > The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution. > > Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> > --- > .../display/panel/sharp,ld-d5116z01b.txt | 27 +++++++++++++++++++ > 1 file changed, 27 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt > new file mode 100644 > index 000000000000..3938c2847fe5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt > @@ -0,0 +1,27 @@ > +Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel > + > +Required properties: > +- compatible: should be "sharp,ld-d5116z01b" > +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) > + > +This binding is compatible with the simple-panel binding. > + > +The device node can contain one 'port' child node with one child > +'endpoint' node, according to the bindings defined in [1]. This > +node should describe panel's video bus. > + > +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt > + > +Example: > + > + panel: panel { > + compatible = "sharp,ld-d5116z01b"; > + power-supply = <&vlcd_3v3>; > + no-hpd The binding do not mention no-hpd - but it is part of panel-simple binding. Is it included in the example for any special reason? Also there is a syntax error, ";" is missing. Sam > + > + port { > + panel_ep: endpoint { > + remote-endpoint = <&bridge_out_ep>; > + }; > + }; > + }; > -- > 2.17.1
On Fri, Jul 5, 2019 at 11:23 AM Sam Ravnborg <sam@ravnborg.org> wrote: > > Hi Jeffrey. > > On Fri, Jul 05, 2019 at 09:56:55AM -0700, Jeffrey Hugo wrote: > > + panel: panel { > > + compatible = "sharp,ld-d5116z01b"; > > + power-supply = <&vlcd_3v3>; > > + no-hpd > The binding do not mention no-hpd - but it is part of panel-simple > binding. Is it included in the example for any special reason? I just copied (poorly apparently since a ";" is missing) from my platform's dt. There is no particular reason the example lists no-hpd. I'll drop it in the next rev.
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt new file mode 100644 index 000000000000..3938c2847fe5 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt @@ -0,0 +1,27 @@ +Sharp LD-D5116Z01B 12.3" WUXGA+ eDP panel + +Required properties: +- compatible: should be "sharp,ld-d5116z01b" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) + +This binding is compatible with the simple-panel binding. + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in [1]. This +node should describe panel's video bus. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + panel: panel { + compatible = "sharp,ld-d5116z01b"; + power-supply = <&vlcd_3v3>; + no-hpd + + port { + panel_ep: endpoint { + remote-endpoint = <&bridge_out_ep>; + }; + }; + };
The Sharp LD-D5116Z01B is a 12.3" eDP panel with a 1920X1280 resolution. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> --- .../display/panel/sharp,ld-d5116z01b.txt | 27 +++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,ld-d5116z01b.txt