| Message ID | 20190702032120.16539-3-ran.bi@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Support for MediaTek MT2712 RTC | expand |
Hi, On 02/07/2019 11:21:19+0800, Ran Bi wrote: > diff --git a/drivers/rtc/rtc-mt2712.c b/drivers/rtc/rtc-mt2712.c > new file mode 100644 > index 000000000000..f98f0ab114c5 > --- /dev/null > +++ b/drivers/rtc/rtc-mt2712.c > @@ -0,0 +1,495 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2019 MediaTek Inc. > + * Author: Ran Bi <ran.bi@mediatek.com> > + */ > + > +#include <linux/delay.h> > +#include <linux/init.h> > +#include <linux/io.h> > +#include <linux/irqdomain.h> > +#include <linux/module.h> > +#include <linux/of_address.h> > +#include <linux/of_irq.h> > +#include <linux/platform_device.h> > +#include <linux/rtc.h> > + > +#define MTK_RTC_DEV KBUILD_MODNAME > + > +#define RTC_BBPU 0x0000 > +#define RTC_BBPU_CLRPKY (1U << 4) Please use BIT(). Also, I don't feel that the RTC prefix is adding any value. MT2712 would be a better choice here. > +#define RTC_BBPU_RELOAD (1U << 5) > +#define RTC_BBPU_CBUSY (1U << 6) > +#define RTC_BBPU_KEY (0x43 << 8) > + > +#define RTC_IRQ_STA 0x0004 > +#define RTC_IRQ_STA_AL (1U << 0) > +#define RTC_IRQ_STA_TC (1U << 1) > + > +#define RTC_IRQ_EN 0x0008 > +#define RTC_IRQ_EN_AL (1U << 0) > +#define RTC_IRQ_EN_TC (1U << 1) > +#define RTC_IRQ_EN_ONESHOT (1U << 2) > +#define RTC_IRQ_EN_ONESHOT_AL (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL) > + > +#define RTC_CII_EN 0x000c > + > +#define RTC_AL_MASK 0x0010 > +#define RTC_AL_MASK_DOW (1U << 4) > + > +#define RTC_TC_SEC 0x0014 > +#define RTC_TC_MIN 0x0018 > +#define RTC_TC_HOU 0x001c > +#define RTC_TC_DOM 0x0020 > +#define RTC_TC_DOW 0x0024 > +#define RTC_TC_MTH 0x0028 > +#define RTC_TC_YEA 0x002c > + > +#define RTC_AL_SEC 0x0030 > +#define RTC_AL_MIN 0x0034 > +#define RTC_AL_HOU 0x0038 > +#define RTC_AL_DOM 0x003c > +#define RTC_AL_DOW 0x0040 > +#define RTC_AL_MTH 0x0044 > +#define RTC_AL_YEA 0x0048 > + > +#define RTC_SEC_MASK 0x003f > +#define RTC_MIN_MASK 0x003f > +#define RTC_HOU_MASK 0x001f > +#define RTC_DOM_MASK 0x001f > +#define RTC_DOW_MASK 0x0007 > +#define RTC_MTH_MASK 0x000f > +#define RTC_YEA_MASK 0x007f > + > +#define RTC_POWERKEY1 0x004c > +#define RTC_POWERKEY2 0x0050 > +#define RTC_POWERKEY1_KEY 0xa357 > +#define RTC_POWERKEY2_KEY 0x67d2 > + > +#define RTC_CON0 0x005c > +#define RTC_CON1 0x0060 > + > +#define RTC_PROT 0x0070 > +#define RTC_PROT_UNLOCK1 0x9136 > +#define RTC_PROT_UNLOCK2 0x586a > + > +#define RTC_WRTGR 0x0078 > + > +/* we map HW YEAR 0 to 1968 not 1970 because 2000 is the leap year */ > +#define RTC_MIN_YEAR 1968 > +#define RTC_BASE_YEAR 1900 > +#define RTC_MIN_YEAR_OFFSET (RTC_MIN_YEAR - RTC_BASE_YEAR) Do not do that. If this RTC range starts in 200, ths is what the driver has to support, you should not care about dates before 2000. Note that the RTC core can still properly shift the range if it is absolutely necessary. > + > +#define RTC_DEFAULT_YEA 2010 > +#define RTC_DEFAULT_MTH 1 > +#define RTC_DEFAULT_DOM 1 > + > +struct mt2712_rtc { > + struct device *dev; > + struct rtc_device *rtc_dev; > + void __iomem *base; > + struct mutex lock; > + int irq; > + u8 irq_wake_enabled; > +}; > + > +static inline u32 rtc_readl(struct mt2712_rtc *rtc, u32 reg) Please use a more descriptive prefix than just rtc_. > +{ > + return readl(rtc->base + reg); > +} > + > +static inline void rtc_writel(struct mt2712_rtc *rtc, u32 reg, u32 val) > +{ > + writel(val, rtc->base + reg); > +} > + > +static void rtc_write_trigger(struct mt2712_rtc *rtc) > +{ > + unsigned long timeout = jiffies + HZ/10; > + > + rtc_writel(rtc, RTC_WRTGR, 1); > + while (1) { > + if (!(rtc_readl(rtc, RTC_BBPU) & RTC_BBPU_CBUSY)) > + break; > + > + if (time_after(jiffies, timeout)) { > + dev_err(rtc->dev, "%s time out!\n", __func__); > + break; > + } > + cpu_relax(); > + } > +} > + > +static void rtc_writeif_unlock(struct mt2712_rtc *rtc) > +{ > + rtc_writel(rtc, RTC_PROT, RTC_PROT_UNLOCK1); > + rtc_write_trigger(rtc); > + rtc_writel(rtc, RTC_PROT, RTC_PROT_UNLOCK2); > + rtc_write_trigger(rtc); > +} > + > +static irqreturn_t rtc_irq_handler_thread(int irq, void *data) > +{ > + struct mt2712_rtc *rtc = data; > + u16 irqsta, irqen; > + > + irqsta = rtc_readl(rtc, RTC_IRQ_STA); > + if (irqsta & RTC_IRQ_STA_AL) { > + rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF); > + irqen = irqsta & ~RTC_IRQ_EN_AL; > + > + mutex_lock(&rtc->lock); You should take rtc->rtc_dev->ops_lock. This would remove the need for rtc->lock. > + rtc_writel(rtc, RTC_IRQ_EN, irqen); > + rtc_write_trigger(rtc); > + mutex_unlock(&rtc->lock); > + return IRQ_HANDLED; > + } > + > + return IRQ_NONE; > +} > + > +static void __mtk_rtc_read_time(struct mt2712_rtc *rtc, > + struct rtc_time *tm, int *sec) > +{ > + mutex_lock(&rtc->lock); > + tm->tm_sec = rtc_readl(rtc, RTC_TC_SEC) & RTC_SEC_MASK; > + tm->tm_min = rtc_readl(rtc, RTC_TC_MIN) & RTC_MIN_MASK; > + tm->tm_hour = rtc_readl(rtc, RTC_TC_HOU) & RTC_HOU_MASK; > + tm->tm_mday = rtc_readl(rtc, RTC_TC_DOM) & RTC_DOM_MASK; > + tm->tm_mon = rtc_readl(rtc, RTC_TC_MTH) & RTC_MTH_MASK; > + tm->tm_year = rtc_readl(rtc, RTC_TC_YEA) & RTC_YEA_MASK; > + > + *sec = rtc_readl(rtc, RTC_TC_SEC) & RTC_SEC_MASK; > + mutex_unlock(&rtc->lock); > +} > + > +static int mtk_rtc_read_time(struct device *dev, struct rtc_time *tm) > +{ > + struct mt2712_rtc *rtc = dev_get_drvdata(dev); > + time64_t time; > + int days, sec; > + > + do { > + __mtk_rtc_read_time(rtc, tm, &sec); > + } while (sec < tm->tm_sec); /* SEC has carried */ > + > + /* HW register use 7 bits to store year data, minus > + * RTC_MIN_YEAR_OFFSET brfore write year data to register, and plus > + * RTC_MIN_YEAR_OFFSET back after read year from register > + */ > + tm->tm_year += RTC_MIN_YEAR_OFFSET; > + As stated before, do not do that, simply add 100. > + /* HW register start mon from one, but tm_mon start from zero. */ > + tm->tm_mon--; > + > + /* rtc_tm_to_time64 convert Gregorian date to seconds since > + * 01-01-1970 00:00:00, and this date is Thursday > + */ > + time = rtc_tm_to_time64(tm); > + days = div_s64(time, 86400); > + tm->tm_wday = (days + 4) % 7; > + This is not necessary, nobody cares about tm_wday, if you don't have it, do not set it. > + return 0; > +} > + > +static int mtk_rtc_set_time(struct device *dev, struct rtc_time *tm) > +{ > + struct mt2712_rtc *rtc = dev_get_drvdata(dev); > + > + mutex_lock(&rtc->lock); > + tm->tm_year -= RTC_MIN_YEAR_OFFSET; > + tm->tm_mon++; > + > + rtc_writel(rtc, RTC_TC_SEC, tm->tm_sec & RTC_SEC_MASK); > + rtc_writel(rtc, RTC_TC_MIN, tm->tm_min & RTC_MIN_MASK); > + rtc_writel(rtc, RTC_TC_HOU, tm->tm_hour & RTC_HOU_MASK); > + rtc_writel(rtc, RTC_TC_DOM, tm->tm_mday & RTC_DOM_MASK); > + rtc_writel(rtc, RTC_TC_MTH, tm->tm_mon & RTC_MTH_MASK); > + rtc_writel(rtc, RTC_TC_YEA, tm->tm_year & RTC_YEA_MASK); > + > + rtc_write_trigger(rtc); > + mutex_unlock(&rtc->lock); > + > + return 0; > +} > + > +static int mtk_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) > +{ > + struct mt2712_rtc *rtc = dev_get_drvdata(dev); > + struct rtc_time *tm = &alm->time; > + u16 irqen; > + > + mutex_lock(&rtc->lock); > + irqen = rtc_readl(rtc, RTC_IRQ_EN); > + alm->enabled = !!(irqen & RTC_IRQ_EN_AL); > + > + tm->tm_sec = rtc_readl(rtc, RTC_AL_SEC) & RTC_SEC_MASK; > + tm->tm_min = rtc_readl(rtc, RTC_AL_MIN) & RTC_MIN_MASK; > + tm->tm_hour = rtc_readl(rtc, RTC_AL_HOU) & RTC_HOU_MASK; > + tm->tm_mday = rtc_readl(rtc, RTC_AL_DOM) & RTC_DOM_MASK; > + tm->tm_mon = rtc_readl(rtc, RTC_AL_MTH) & RTC_MTH_MASK; > + tm->tm_year = rtc_readl(rtc, RTC_AL_YEA) & RTC_YEA_MASK; > + > + tm->tm_year += RTC_MIN_YEAR_OFFSET; > + tm->tm_mon--; > + mutex_unlock(&rtc->lock); > + > + return 0; > +} > + > +static int mtk_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) > +{ > + struct mt2712_rtc *rtc = dev_get_drvdata(dev); > + struct rtc_time *tm = &alm->time; > + u16 irqen; > + > + dev_info(rtc->dev, "set al time = %04d-%02d-%02d %02d:%02d:%02d (%d)\n", Do not use dev_info, dev_dbg is probably what you want here. Also, use %ptR. > + tm->tm_year + RTC_BASE_YEAR, tm->tm_mon + 1, tm->tm_mday, > + tm->tm_hour, tm->tm_min, tm->tm_sec, alm->enabled); > + > + tm->tm_year -= RTC_MIN_YEAR_OFFSET; > + tm->tm_mon++; > + > + mutex_lock(&rtc->lock); You probably need to disable the alarm before starting to modify the registers. > + rtc_writel(rtc, RTC_AL_SEC, > + (rtc_readl(rtc, RTC_AL_SEC) & ~(RTC_SEC_MASK)) | > + (tm->tm_sec & RTC_SEC_MASK)); > + rtc_writel(rtc, RTC_AL_MIN, > + (rtc_readl(rtc, RTC_AL_MIN) & ~(RTC_MIN_MASK)) | > + (tm->tm_min & RTC_MIN_MASK)); > + rtc_writel(rtc, RTC_AL_HOU, > + (rtc_readl(rtc, RTC_AL_HOU) & ~(RTC_HOU_MASK)) | > + (tm->tm_hour & RTC_HOU_MASK)); > + rtc_writel(rtc, RTC_AL_DOM, > + (rtc_readl(rtc, RTC_AL_DOM) & ~(RTC_DOM_MASK)) | > + (tm->tm_mday & RTC_DOM_MASK)); > + rtc_writel(rtc, RTC_AL_MTH, > + (rtc_readl(rtc, RTC_AL_MTH) & ~(RTC_MTH_MASK)) | > + (tm->tm_mon & RTC_MTH_MASK)); > + rtc_writel(rtc, RTC_AL_YEA, > + (rtc_readl(rtc, RTC_AL_YEA) & ~(RTC_YEA_MASK)) | > + (tm->tm_year & RTC_YEA_MASK)); > + > + rtc_writel(rtc, RTC_AL_MASK, RTC_AL_MASK_DOW); /* mask DOW */ > + > + if (alm->enabled) { > + irqen = rtc_readl(rtc, RTC_IRQ_EN) | RTC_IRQ_EN_ONESHOT_AL; > + rtc_writel(rtc, RTC_IRQ_EN, irqen); > + } else { > + irqen = rtc_readl(rtc, RTC_IRQ_EN) & ~(RTC_IRQ_EN_ONESHOT_AL); > + rtc_writel(rtc, RTC_IRQ_EN, irqen); > + } > + rtc_write_trigger(rtc); > + mutex_unlock(&rtc->lock); > + > + return 0; > +} > + > +static bool valid_rtc_time(struct mt2712_rtc *rtc) This function is not necessary, see later. > +{ > + struct rtc_time tm; > + struct rtc_wkalrm alm; > + > + mtk_rtc_read_time(rtc->dev, &tm); > + if (rtc_valid_tm(&tm)) > + return false; > + > + mtk_rtc_read_alarm(rtc->dev, &alm); > + if (rtc_valid_tm(&alm.time)) > + return false; > + > + return true; > +} > + > +static void reset_rtc_time(struct mt2712_rtc *rtc) > +{ > + rtc_writel(rtc, RTC_TC_YEA, RTC_DEFAULT_YEA - RTC_MIN_YEAR); > + rtc_writel(rtc, RTC_TC_MTH, RTC_DEFAULT_MTH); > + rtc_writel(rtc, RTC_TC_DOM, RTC_DEFAULT_DOM); > + rtc_writel(rtc, RTC_TC_DOW, 1); > + rtc_writel(rtc, RTC_TC_HOU, 0); > + rtc_writel(rtc, RTC_TC_MIN, 0); > + rtc_writel(rtc, RTC_TC_SEC, 0); > + > + rtc_writel(rtc, RTC_AL_YEA, 1970 - RTC_MIN_YEAR); > + rtc_writel(rtc, RTC_AL_MTH, 1); > + rtc_writel(rtc, RTC_AL_DOM, 1); > + rtc_writel(rtc, RTC_AL_DOW, 1); > + rtc_writel(rtc, RTC_AL_HOU, 0); > + rtc_writel(rtc, RTC_AL_MIN, 0); > + rtc_writel(rtc, RTC_AL_SEC, 0); > + > + rtc_write_trigger(rtc); > +} > + > +/* Init RTC register */ > +static void rtc_hw_init(struct mt2712_rtc *rtc) > +{ > + u32 p1, p2; > + > + rtc_writel(rtc, RTC_BBPU, RTC_BBPU_KEY | RTC_BBPU_RELOAD); > + > + rtc_writel(rtc, RTC_IRQ_EN, 0); Are you sure you want to disable interrupts every time you reboot? I guess the RTC has its own power domain and may be used across reboots. > + rtc_writel(rtc, RTC_IRQ_STA, 0); > + rtc_writel(rtc, RTC_CII_EN, 0); > + rtc_writel(rtc, RTC_AL_MASK, 0); > + /* necessary before set RTC_POWERKEY */ > + rtc_writel(rtc, RTC_CON0, 0x4848); > + rtc_writel(rtc, RTC_CON1, 0x0048); > + > + rtc_write_trigger(rtc); > + > + rtc_readl(rtc, RTC_IRQ_STA); /* read clear */ > + > + p1 = rtc_readl(rtc, RTC_POWERKEY1); > + p2 = rtc_readl(rtc, RTC_POWERKEY2); > + dev_info(rtc->dev, "%s rtc p1 is %x, p2 is %x!\n", __func__, p1, p2); This debug message has to be removed. > + > + /* RTC need POWERKEY1/2 match, then goto normal work mode */ > + rtc_writel(rtc, RTC_POWERKEY1, RTC_POWERKEY1_KEY); > + rtc_writel(rtc, RTC_POWERKEY2, RTC_POWERKEY2_KEY); > + rtc_write_trigger(rtc); > + > + rtc_writeif_unlock(rtc); > + > + /* > + * register status was not correct, > + * need set time and alarm to default > + */ > + if (p1 != RTC_POWERKEY1_KEY || p2 != RTC_POWERKEY2_KEY > + || !valid_rtc_time(rtc)) { > + reset_rtc_time(rtc); Do not do that. This is valuable information. If the time is invalid, report it as such in read_time and read_alarm. Resetting the time here will lead to more issues later (i.e. userspace is not able to know whether the time is set correctly or not). > + dev_info(rtc->dev, "first boot init!\n"); > + } > +} > + > +static const struct rtc_class_ops mtk_rtc_ops = { > + .read_time = mtk_rtc_read_time, > + .set_time = mtk_rtc_set_time, > + .read_alarm = mtk_rtc_read_alarm, > + .set_alarm = mtk_rtc_set_alarm, > +}; > + > +static int mtk_rtc_probe(struct platform_device *pdev) > +{ > + struct resource *res; > + struct mt2712_rtc *rtc; > + int ret; > + > + rtc = devm_kzalloc(&pdev->dev, sizeof(struct mt2712_rtc), GFP_KERNEL); > + if (!rtc) > + return -ENOMEM; > + > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + rtc->base = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(rtc->base)) > + return PTR_ERR(rtc->base); > + > + rtc->irq = platform_get_irq(pdev, 0); > + if (rtc->irq < 0) { > + dev_err(&pdev->dev, "No IRQ resource\n"); > + return rtc->irq; > + } > + > + mutex_init(&rtc->lock); > + rtc->dev = &pdev->dev; > + platform_set_drvdata(pdev, rtc); > + > + rtc->rtc_dev = devm_rtc_allocate_device(rtc->dev); > + if (IS_ERR(rtc->rtc_dev)) > + return PTR_ERR(rtc->rtc_dev); > + > + ret = request_threaded_irq(rtc->irq, NULL, devm_request_threaded_irq would remove the need for out_free_irq and mtk_rtc_remove(). > + rtc_irq_handler_thread, > + IRQF_ONESHOT | IRQF_TRIGGER_LOW, > + dev_name(rtc->dev), rtc); > + if (ret) { > + dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n", > + rtc->irq, ret); > + return ret; > + } > + > + /* rtc hw init */ > + rtc_hw_init(rtc); > + > + device_init_wakeup(&pdev->dev, true); > + > + rtc->rtc_dev->ops = &mtk_rtc_ops; > + > + ret = rtc_register_device(rtc->rtc_dev); > + if (ret) { > + dev_err(&pdev->dev, "register rtc device failed\n"); > + goto out_free_irq; > + } > + > + return 0; > + > +out_free_irq: > + free_irq(rtc->irq, rtc); > + return ret; > +} > + > +static int mtk_rtc_remove(struct platform_device *pdev) > +{ > + struct mt2712_rtc *rtc = dev_get_drvdata(&pdev->dev); > + > + free_irq(rtc->irq, rtc); > + > + return 0; > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int mt2712_rtc_suspend(struct device *dev) > +{ > + int wake_status = 0; > + struct mt2712_rtc *rtc = dev_get_drvdata(dev); > + > + if (device_may_wakeup(dev)) { > + wake_status = enable_irq_wake(rtc->irq); > + if (!wake_status) > + rtc->irq_wake_enabled = true; > + } > + > + return 0; > +} > + > +static int mt2712_rtc_resume(struct device *dev) > +{ > + int wake_status = 0; > + struct mt2712_rtc *rtc = dev_get_drvdata(dev); > + > + if (device_may_wakeup(dev) && rtc->irq_wake_enabled) { > + wake_status = disable_irq_wake(rtc->irq); > + if (!wake_status) > + rtc->irq_wake_enabled = false; > + } > + > + return 0; > +} > + > +static SIMPLE_DEV_PM_OPS(mt2712_pm_ops, mt2712_rtc_suspend, > + mt2712_rtc_resume); > +#endif > + > +static const struct of_device_id mt2712_rtc_of_match[] = { > + { .compatible = "mediatek,mt2712-rtc", }, > + { }, > +}; > + > +MODULE_DEVICE_TABLE(of, mt2712_rtc_of_match) > + > +static struct platform_driver mtk_rtc_driver = { > + .driver = { > + .name = MTK_RTC_DEV, > + .of_match_table = mt2712_rtc_of_match, > + .pm = &mt2712_pm_ops, > + }, > + .probe = mtk_rtc_probe, > + .remove = mtk_rtc_remove, > +}; > + > +module_platform_driver(mtk_rtc_driver); > + > +MODULE_DESCRIPTION("MediaTek MT2712 SoC based RTC Driver"); > +MODULE_AUTHOR("Ran Bi <ran.bi@mediatek.com>"); > +MODULE_LICENSE("GPL"); > -- > 2.18.0 >
Hi Belloni, On Sat, 2019-07-13 at 23:12 +0200, Alexandre Belloni wrote: > > +#define RTC_BBPU 0x0000 > > +#define RTC_BBPU_CLRPKY (1U << 4) > > Please use BIT(). Also, I don't feel that the RTC prefix is adding any > value. MT2712 would be a better choice here. > Will change to MT2712 at next patch. > > + > > +/* we map HW YEAR 0 to 1968 not 1970 because 2000 is the leap year */ > > +#define RTC_MIN_YEAR 1968 > > +#define RTC_BASE_YEAR 1900 > > +#define RTC_MIN_YEAR_OFFSET (RTC_MIN_YEAR - RTC_BASE_YEAR) > > Do not do that. If this RTC range starts in 200, ths is what the driver > has to support, you should not care about dates before 2000. Note that > the RTC core can still properly shift the range if it is absolutely > necessary. > Do we need to care about default alarm date 1970-01-01? Or can I just set it to 2000-01-01? > > + > > +static inline u32 rtc_readl(struct mt2712_rtc *rtc, u32 reg) > > Please use a more descriptive prefix than just rtc_. > Do you mean it's better to use prefix "mt2712_rtc_"? > > + mutex_lock(&rtc->lock); > > You should take rtc->rtc_dev->ops_lock. This would remove the need for > rtc->lock. > Will change it at next patch. > > + tm->tm_year += RTC_MIN_YEAR_OFFSET; > > + > > As stated before, do not do that, simply add 100. > Will change it at next patch. > > + /* rtc_tm_to_time64 convert Gregorian date to seconds since > > + * 01-01-1970 00:00:00, and this date is Thursday > > + */ > > + time = rtc_tm_to_time64(tm); > > + days = div_s64(time, 86400); > > + tm->tm_wday = (days + 4) % 7; > > + > > This is not necessary, nobody cares about tm_wday, if you don't have it, > do not set it. > Will remove this part at next patch. > > + dev_info(rtc->dev, "set al time = %04d-%02d-%02d %02d:%02d:%02d (%d)\n", > > Do not use dev_info, dev_dbg is probably what you want here. Also, use > %ptR. > Will change it at next patch. > > + mutex_lock(&rtc->lock); > > You probably need to disable the alarm before starting to modify the > registers. > Will change it at next patch. > > +static bool valid_rtc_time(struct mt2712_rtc *rtc) > > This function is not necessary, see later. > Will change it at next patch. > > + rtc_writel(rtc, RTC_IRQ_EN, 0); > > Are you sure you want to disable interrupts every time you reboot? I > guess the RTC has its own power domain and may be used across reboots. > Will remove this at next patch. > > + dev_info(rtc->dev, "%s rtc p1 is %x, p2 is %x!\n", __func__, p1, p2); > > This debug message has to be removed. > Will remove this at next patch. > > + > > + /* > > + * register status was not correct, > > + * need set time and alarm to default > > + */ > > + if (p1 != RTC_POWERKEY1_KEY || p2 != RTC_POWERKEY2_KEY > > + || !valid_rtc_time(rtc)) { > > + reset_rtc_time(rtc); > > Do not do that. This is valuable information. If the time is invalid, > report it as such in read_time and read_alarm. Resetting the time here > will lead to more issues later (i.e. userspace is not able to know > whether the time is set correctly or not). > When RTC's power run out, RTC will lost it's registers value and time data at next boot up. We even cannot know what the date and time it shows. We want to check this state here and set a default RTC date. Do you think it's no need here and the date should be set by system? > > + ret = request_threaded_irq(rtc->irq, NULL, > > devm_request_threaded_irq would remove the need for out_free_irq and > mtk_rtc_remove(). > Will change it at next patch. And will remove mtk_rtc_remove() function. -- Ran Bi, MediaTek
On 17/07/2019 16:54:54+0800, Ran Bi wrote: > > > + > > > +/* we map HW YEAR 0 to 1968 not 1970 because 2000 is the leap year */ > > > +#define RTC_MIN_YEAR 1968 > > > +#define RTC_BASE_YEAR 1900 > > > +#define RTC_MIN_YEAR_OFFSET (RTC_MIN_YEAR - RTC_BASE_YEAR) > > > > Do not do that. If this RTC range starts in 200, ths is what the driver > > has to support, you should not care about dates before 2000. Note that > > the RTC core can still properly shift the range if it is absolutely > > necessary. > > > > Do we need to care about default alarm date 1970-01-01? Or can I just > set it to 2000-01-01? > You never have to set a default value. It doesn't add any value versus an unknown value. > > > + > > > +static inline u32 rtc_readl(struct mt2712_rtc *rtc, u32 reg) > > > > Please use a more descriptive prefix than just rtc_. > > > > Do you mean it's better to use prefix "mt2712_rtc_"? > Yes. > > > + > > > + /* > > > + * register status was not correct, > > > + * need set time and alarm to default > > > + */ > > > + if (p1 != RTC_POWERKEY1_KEY || p2 != RTC_POWERKEY2_KEY > > > + || !valid_rtc_time(rtc)) { > > > + reset_rtc_time(rtc); > > > > Do not do that. This is valuable information. If the time is invalid, > > report it as such in read_time and read_alarm. Resetting the time here > > will lead to more issues later (i.e. userspace is not able to know > > whether the time is set correctly or not). > > > > When RTC's power run out, RTC will lost it's registers value and time > data at next boot up. We even cannot know what the date and time it > shows. We want to check this state here and set a default RTC date. Do > you think it's no need here and the date should be set by system? > If I understand correctly, the POWERKEY register will lose their value. This means that you know that the time is incorrect. instead of setting it to a default value and losing that valuable information, simply check for that in read_time and return EINVAL in that case. then on the next set_time invocation, you can set the POWERKEY registers and set the time to a known value.
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 7b8e156dbf38..87c601dba673 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1762,6 +1762,16 @@ config RTC_DRV_MOXART This driver can also be built as a module. If so, the module will be called rtc-moxart +config RTC_DRV_MT2712 + tristate "MediaTek MT2712 SoC based RTC" + depends on ARCH_MEDIATEK || COMPILE_TEST + help + This enables support for the real time clock built in the MediaTek + SoCs for MT2712. + + This drive can also be built as a module. If so, the module + will be called rtc-mt2712. + config RTC_DRV_MT6397 tristate "MediaTek PMIC based RTC" depends on MFD_MT6397 || (COMPILE_TEST && IRQ_DOMAIN) diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 9d997faa2c26..1ef202af9033 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -107,6 +107,7 @@ obj-$(CONFIG_RTC_DRV_MESON) += rtc-meson.o obj-$(CONFIG_RTC_DRV_MOXART) += rtc-moxart.o obj-$(CONFIG_RTC_DRV_MPC5121) += rtc-mpc5121.o obj-$(CONFIG_RTC_DRV_MSM6242) += rtc-msm6242.o +obj-$(CONFIG_RTC_DRV_MT2712) += rtc-mt2712.o obj-$(CONFIG_RTC_DRV_MT6397) += rtc-mt6397.o obj-$(CONFIG_RTC_DRV_MT7622) += rtc-mt7622.o obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o diff --git a/drivers/rtc/rtc-mt2712.c b/drivers/rtc/rtc-mt2712.c new file mode 100644 index 000000000000..f98f0ab114c5 --- /dev/null +++ b/drivers/rtc/rtc-mt2712.c @@ -0,0 +1,495 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 MediaTek Inc. + * Author: Ran Bi <ran.bi@mediatek.com> + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irqdomain.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/rtc.h> + +#define MTK_RTC_DEV KBUILD_MODNAME + +#define RTC_BBPU 0x0000 +#define RTC_BBPU_CLRPKY (1U << 4) +#define RTC_BBPU_RELOAD (1U << 5) +#define RTC_BBPU_CBUSY (1U << 6) +#define RTC_BBPU_KEY (0x43 << 8) + +#define RTC_IRQ_STA 0x0004 +#define RTC_IRQ_STA_AL (1U << 0) +#define RTC_IRQ_STA_TC (1U << 1) + +#define RTC_IRQ_EN 0x0008 +#define RTC_IRQ_EN_AL (1U << 0) +#define RTC_IRQ_EN_TC (1U << 1) +#define RTC_IRQ_EN_ONESHOT (1U << 2) +#define RTC_IRQ_EN_ONESHOT_AL (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL) + +#define RTC_CII_EN 0x000c + +#define RTC_AL_MASK 0x0010 +#define RTC_AL_MASK_DOW (1U << 4) + +#define RTC_TC_SEC 0x0014 +#define RTC_TC_MIN 0x0018 +#define RTC_TC_HOU 0x001c +#define RTC_TC_DOM 0x0020 +#define RTC_TC_DOW 0x0024 +#define RTC_TC_MTH 0x0028 +#define RTC_TC_YEA 0x002c + +#define RTC_AL_SEC 0x0030 +#define RTC_AL_MIN 0x0034 +#define RTC_AL_HOU 0x0038 +#define RTC_AL_DOM 0x003c +#define RTC_AL_DOW 0x0040 +#define RTC_AL_MTH 0x0044 +#define RTC_AL_YEA 0x0048 + +#define RTC_SEC_MASK 0x003f +#define RTC_MIN_MASK 0x003f +#define RTC_HOU_MASK 0x001f +#define RTC_DOM_MASK 0x001f +#define RTC_DOW_MASK 0x0007 +#define RTC_MTH_MASK 0x000f +#define RTC_YEA_MASK 0x007f + +#define RTC_POWERKEY1 0x004c +#define RTC_POWERKEY2 0x0050 +#define RTC_POWERKEY1_KEY 0xa357 +#define RTC_POWERKEY2_KEY 0x67d2 + +#define RTC_CON0 0x005c +#define RTC_CON1 0x0060 + +#define RTC_PROT 0x0070 +#define RTC_PROT_UNLOCK1 0x9136 +#define RTC_PROT_UNLOCK2 0x586a + +#define RTC_WRTGR 0x0078 + +/* we map HW YEAR 0 to 1968 not 1970 because 2000 is the leap year */ +#define RTC_MIN_YEAR 1968 +#define RTC_BASE_YEAR 1900 +#define RTC_MIN_YEAR_OFFSET (RTC_MIN_YEAR - RTC_BASE_YEAR) + +#define RTC_DEFAULT_YEA 2010 +#define RTC_DEFAULT_MTH 1 +#define RTC_DEFAULT_DOM 1 + +struct mt2712_rtc { + struct device *dev; + struct rtc_device *rtc_dev; + void __iomem *base; + struct mutex lock; + int irq; + u8 irq_wake_enabled; +}; + +static inline u32 rtc_readl(struct mt2712_rtc *rtc, u32 reg) +{ + return readl(rtc->base + reg); +} + +static inline void rtc_writel(struct mt2712_rtc *rtc, u32 reg, u32 val) +{ + writel(val, rtc->base + reg); +} + +static void rtc_write_trigger(struct mt2712_rtc *rtc) +{ + unsigned long timeout = jiffies + HZ/10; + + rtc_writel(rtc, RTC_WRTGR, 1); + while (1) { + if (!(rtc_readl(rtc, RTC_BBPU) & RTC_BBPU_CBUSY)) + break; + + if (time_after(jiffies, timeout)) { + dev_err(rtc->dev, "%s time out!\n", __func__); + break; + } + cpu_relax(); + } +} + +static void rtc_writeif_unlock(struct mt2712_rtc *rtc) +{ + rtc_writel(rtc, RTC_PROT, RTC_PROT_UNLOCK1); + rtc_write_trigger(rtc); + rtc_writel(rtc, RTC_PROT, RTC_PROT_UNLOCK2); + rtc_write_trigger(rtc); +} + +static irqreturn_t rtc_irq_handler_thread(int irq, void *data) +{ + struct mt2712_rtc *rtc = data; + u16 irqsta, irqen; + + irqsta = rtc_readl(rtc, RTC_IRQ_STA); + if (irqsta & RTC_IRQ_STA_AL) { + rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF); + irqen = irqsta & ~RTC_IRQ_EN_AL; + + mutex_lock(&rtc->lock); + rtc_writel(rtc, RTC_IRQ_EN, irqen); + rtc_write_trigger(rtc); + mutex_unlock(&rtc->lock); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static void __mtk_rtc_read_time(struct mt2712_rtc *rtc, + struct rtc_time *tm, int *sec) +{ + mutex_lock(&rtc->lock); + tm->tm_sec = rtc_readl(rtc, RTC_TC_SEC) & RTC_SEC_MASK; + tm->tm_min = rtc_readl(rtc, RTC_TC_MIN) & RTC_MIN_MASK; + tm->tm_hour = rtc_readl(rtc, RTC_TC_HOU) & RTC_HOU_MASK; + tm->tm_mday = rtc_readl(rtc, RTC_TC_DOM) & RTC_DOM_MASK; + tm->tm_mon = rtc_readl(rtc, RTC_TC_MTH) & RTC_MTH_MASK; + tm->tm_year = rtc_readl(rtc, RTC_TC_YEA) & RTC_YEA_MASK; + + *sec = rtc_readl(rtc, RTC_TC_SEC) & RTC_SEC_MASK; + mutex_unlock(&rtc->lock); +} + +static int mtk_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + struct mt2712_rtc *rtc = dev_get_drvdata(dev); + time64_t time; + int days, sec; + + do { + __mtk_rtc_read_time(rtc, tm, &sec); + } while (sec < tm->tm_sec); /* SEC has carried */ + + /* HW register use 7 bits to store year data, minus + * RTC_MIN_YEAR_OFFSET brfore write year data to register, and plus + * RTC_MIN_YEAR_OFFSET back after read year from register + */ + tm->tm_year += RTC_MIN_YEAR_OFFSET; + + /* HW register start mon from one, but tm_mon start from zero. */ + tm->tm_mon--; + + /* rtc_tm_to_time64 convert Gregorian date to seconds since + * 01-01-1970 00:00:00, and this date is Thursday + */ + time = rtc_tm_to_time64(tm); + days = div_s64(time, 86400); + tm->tm_wday = (days + 4) % 7; + + return 0; +} + +static int mtk_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + struct mt2712_rtc *rtc = dev_get_drvdata(dev); + + mutex_lock(&rtc->lock); + tm->tm_year -= RTC_MIN_YEAR_OFFSET; + tm->tm_mon++; + + rtc_writel(rtc, RTC_TC_SEC, tm->tm_sec & RTC_SEC_MASK); + rtc_writel(rtc, RTC_TC_MIN, tm->tm_min & RTC_MIN_MASK); + rtc_writel(rtc, RTC_TC_HOU, tm->tm_hour & RTC_HOU_MASK); + rtc_writel(rtc, RTC_TC_DOM, tm->tm_mday & RTC_DOM_MASK); + rtc_writel(rtc, RTC_TC_MTH, tm->tm_mon & RTC_MTH_MASK); + rtc_writel(rtc, RTC_TC_YEA, tm->tm_year & RTC_YEA_MASK); + + rtc_write_trigger(rtc); + mutex_unlock(&rtc->lock); + + return 0; +} + +static int mtk_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + struct mt2712_rtc *rtc = dev_get_drvdata(dev); + struct rtc_time *tm = &alm->time; + u16 irqen; + + mutex_lock(&rtc->lock); + irqen = rtc_readl(rtc, RTC_IRQ_EN); + alm->enabled = !!(irqen & RTC_IRQ_EN_AL); + + tm->tm_sec = rtc_readl(rtc, RTC_AL_SEC) & RTC_SEC_MASK; + tm->tm_min = rtc_readl(rtc, RTC_AL_MIN) & RTC_MIN_MASK; + tm->tm_hour = rtc_readl(rtc, RTC_AL_HOU) & RTC_HOU_MASK; + tm->tm_mday = rtc_readl(rtc, RTC_AL_DOM) & RTC_DOM_MASK; + tm->tm_mon = rtc_readl(rtc, RTC_AL_MTH) & RTC_MTH_MASK; + tm->tm_year = rtc_readl(rtc, RTC_AL_YEA) & RTC_YEA_MASK; + + tm->tm_year += RTC_MIN_YEAR_OFFSET; + tm->tm_mon--; + mutex_unlock(&rtc->lock); + + return 0; +} + +static int mtk_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + struct mt2712_rtc *rtc = dev_get_drvdata(dev); + struct rtc_time *tm = &alm->time; + u16 irqen; + + dev_info(rtc->dev, "set al time = %04d-%02d-%02d %02d:%02d:%02d (%d)\n", + tm->tm_year + RTC_BASE_YEAR, tm->tm_mon + 1, tm->tm_mday, + tm->tm_hour, tm->tm_min, tm->tm_sec, alm->enabled); + + tm->tm_year -= RTC_MIN_YEAR_OFFSET; + tm->tm_mon++; + + mutex_lock(&rtc->lock); + rtc_writel(rtc, RTC_AL_SEC, + (rtc_readl(rtc, RTC_AL_SEC) & ~(RTC_SEC_MASK)) | + (tm->tm_sec & RTC_SEC_MASK)); + rtc_writel(rtc, RTC_AL_MIN, + (rtc_readl(rtc, RTC_AL_MIN) & ~(RTC_MIN_MASK)) | + (tm->tm_min & RTC_MIN_MASK)); + rtc_writel(rtc, RTC_AL_HOU, + (rtc_readl(rtc, RTC_AL_HOU) & ~(RTC_HOU_MASK)) | + (tm->tm_hour & RTC_HOU_MASK)); + rtc_writel(rtc, RTC_AL_DOM, + (rtc_readl(rtc, RTC_AL_DOM) & ~(RTC_DOM_MASK)) | + (tm->tm_mday & RTC_DOM_MASK)); + rtc_writel(rtc, RTC_AL_MTH, + (rtc_readl(rtc, RTC_AL_MTH) & ~(RTC_MTH_MASK)) | + (tm->tm_mon & RTC_MTH_MASK)); + rtc_writel(rtc, RTC_AL_YEA, + (rtc_readl(rtc, RTC_AL_YEA) & ~(RTC_YEA_MASK)) | + (tm->tm_year & RTC_YEA_MASK)); + + rtc_writel(rtc, RTC_AL_MASK, RTC_AL_MASK_DOW); /* mask DOW */ + + if (alm->enabled) { + irqen = rtc_readl(rtc, RTC_IRQ_EN) | RTC_IRQ_EN_ONESHOT_AL; + rtc_writel(rtc, RTC_IRQ_EN, irqen); + } else { + irqen = rtc_readl(rtc, RTC_IRQ_EN) & ~(RTC_IRQ_EN_ONESHOT_AL); + rtc_writel(rtc, RTC_IRQ_EN, irqen); + } + rtc_write_trigger(rtc); + mutex_unlock(&rtc->lock); + + return 0; +} + +static bool valid_rtc_time(struct mt2712_rtc *rtc) +{ + struct rtc_time tm; + struct rtc_wkalrm alm; + + mtk_rtc_read_time(rtc->dev, &tm); + if (rtc_valid_tm(&tm)) + return false; + + mtk_rtc_read_alarm(rtc->dev, &alm); + if (rtc_valid_tm(&alm.time)) + return false; + + return true; +} + +static void reset_rtc_time(struct mt2712_rtc *rtc) +{ + rtc_writel(rtc, RTC_TC_YEA, RTC_DEFAULT_YEA - RTC_MIN_YEAR); + rtc_writel(rtc, RTC_TC_MTH, RTC_DEFAULT_MTH); + rtc_writel(rtc, RTC_TC_DOM, RTC_DEFAULT_DOM); + rtc_writel(rtc, RTC_TC_DOW, 1); + rtc_writel(rtc, RTC_TC_HOU, 0); + rtc_writel(rtc, RTC_TC_MIN, 0); + rtc_writel(rtc, RTC_TC_SEC, 0); + + rtc_writel(rtc, RTC_AL_YEA, 1970 - RTC_MIN_YEAR); + rtc_writel(rtc, RTC_AL_MTH, 1); + rtc_writel(rtc, RTC_AL_DOM, 1); + rtc_writel(rtc, RTC_AL_DOW, 1); + rtc_writel(rtc, RTC_AL_HOU, 0); + rtc_writel(rtc, RTC_AL_MIN, 0); + rtc_writel(rtc, RTC_AL_SEC, 0); + + rtc_write_trigger(rtc); +} + +/* Init RTC register */ +static void rtc_hw_init(struct mt2712_rtc *rtc) +{ + u32 p1, p2; + + rtc_writel(rtc, RTC_BBPU, RTC_BBPU_KEY | RTC_BBPU_RELOAD); + + rtc_writel(rtc, RTC_IRQ_EN, 0); + rtc_writel(rtc, RTC_IRQ_STA, 0); + rtc_writel(rtc, RTC_CII_EN, 0); + rtc_writel(rtc, RTC_AL_MASK, 0); + /* necessary before set RTC_POWERKEY */ + rtc_writel(rtc, RTC_CON0, 0x4848); + rtc_writel(rtc, RTC_CON1, 0x0048); + + rtc_write_trigger(rtc); + + rtc_readl(rtc, RTC_IRQ_STA); /* read clear */ + + p1 = rtc_readl(rtc, RTC_POWERKEY1); + p2 = rtc_readl(rtc, RTC_POWERKEY2); + dev_info(rtc->dev, "%s rtc p1 is %x, p2 is %x!\n", __func__, p1, p2); + + /* RTC need POWERKEY1/2 match, then goto normal work mode */ + rtc_writel(rtc, RTC_POWERKEY1, RTC_POWERKEY1_KEY); + rtc_writel(rtc, RTC_POWERKEY2, RTC_POWERKEY2_KEY); + rtc_write_trigger(rtc); + + rtc_writeif_unlock(rtc); + + /* + * register status was not correct, + * need set time and alarm to default + */ + if (p1 != RTC_POWERKEY1_KEY || p2 != RTC_POWERKEY2_KEY + || !valid_rtc_time(rtc)) { + reset_rtc_time(rtc); + dev_info(rtc->dev, "first boot init!\n"); + } +} + +static const struct rtc_class_ops mtk_rtc_ops = { + .read_time = mtk_rtc_read_time, + .set_time = mtk_rtc_set_time, + .read_alarm = mtk_rtc_read_alarm, + .set_alarm = mtk_rtc_set_alarm, +}; + +static int mtk_rtc_probe(struct platform_device *pdev) +{ + struct resource *res; + struct mt2712_rtc *rtc; + int ret; + + rtc = devm_kzalloc(&pdev->dev, sizeof(struct mt2712_rtc), GFP_KERNEL); + if (!rtc) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + rtc->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(rtc->base)) + return PTR_ERR(rtc->base); + + rtc->irq = platform_get_irq(pdev, 0); + if (rtc->irq < 0) { + dev_err(&pdev->dev, "No IRQ resource\n"); + return rtc->irq; + } + + mutex_init(&rtc->lock); + rtc->dev = &pdev->dev; + platform_set_drvdata(pdev, rtc); + + rtc->rtc_dev = devm_rtc_allocate_device(rtc->dev); + if (IS_ERR(rtc->rtc_dev)) + return PTR_ERR(rtc->rtc_dev); + + ret = request_threaded_irq(rtc->irq, NULL, + rtc_irq_handler_thread, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, + dev_name(rtc->dev), rtc); + if (ret) { + dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n", + rtc->irq, ret); + return ret; + } + + /* rtc hw init */ + rtc_hw_init(rtc); + + device_init_wakeup(&pdev->dev, true); + + rtc->rtc_dev->ops = &mtk_rtc_ops; + + ret = rtc_register_device(rtc->rtc_dev); + if (ret) { + dev_err(&pdev->dev, "register rtc device failed\n"); + goto out_free_irq; + } + + return 0; + +out_free_irq: + free_irq(rtc->irq, rtc); + return ret; +} + +static int mtk_rtc_remove(struct platform_device *pdev) +{ + struct mt2712_rtc *rtc = dev_get_drvdata(&pdev->dev); + + free_irq(rtc->irq, rtc); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mt2712_rtc_suspend(struct device *dev) +{ + int wake_status = 0; + struct mt2712_rtc *rtc = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) { + wake_status = enable_irq_wake(rtc->irq); + if (!wake_status) + rtc->irq_wake_enabled = true; + } + + return 0; +} + +static int mt2712_rtc_resume(struct device *dev) +{ + int wake_status = 0; + struct mt2712_rtc *rtc = dev_get_drvdata(dev); + + if (device_may_wakeup(dev) && rtc->irq_wake_enabled) { + wake_status = disable_irq_wake(rtc->irq); + if (!wake_status) + rtc->irq_wake_enabled = false; + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(mt2712_pm_ops, mt2712_rtc_suspend, + mt2712_rtc_resume); +#endif + +static const struct of_device_id mt2712_rtc_of_match[] = { + { .compatible = "mediatek,mt2712-rtc", }, + { }, +}; + +MODULE_DEVICE_TABLE(of, mt2712_rtc_of_match) + +static struct platform_driver mtk_rtc_driver = { + .driver = { + .name = MTK_RTC_DEV, + .of_match_table = mt2712_rtc_of_match, + .pm = &mt2712_pm_ops, + }, + .probe = mtk_rtc_probe, + .remove = mtk_rtc_remove, +}; + +module_platform_driver(mtk_rtc_driver); + +MODULE_DESCRIPTION("MediaTek MT2712 SoC based RTC Driver"); +MODULE_AUTHOR("Ran Bi <ran.bi@mediatek.com>"); +MODULE_LICENSE("GPL");
This add support for the MediaTek MT2712 RTC. It was SoC based RTC, but had different architecture compared with MT7622 RTC. Signed-off-by: Ran Bi <ran.bi@mediatek.com> --- drivers/rtc/Kconfig | 10 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-mt2712.c | 495 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 506 insertions(+) create mode 100644 drivers/rtc/rtc-mt2712.c