diff mbox series

[1/2] arm64: dts: imx8mq: Add gpio-ranges property

Message ID 20190702014400.33554-1-Anson.Huang@nxp.com (mailing list archive)
State Mainlined
Commit 26c2f55a6a15153eed977e94dd42f8565b159526
Headers show
Series [1/2] arm64: dts: imx8mq: Add gpio-ranges property | expand

Commit Message

Anson Huang July 2, 2019, 1:43 a.m. UTC 
From: Anson Huang <Anson.Huang@nxp.com>

Add "gpio-ranges" property to establish connections between GPIOs
and PINs on i.MX8MQ pinctrl driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Abel Vesa July 2, 2019, 7:10 a.m. UTC | #1 
On 19-07-02 09:43:59, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
> 
> Add "gpio-ranges" property to establish connections between GPIOs
> and PINs on i.MX8MQ pinctrl driver.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

For both patches:

Reviewed-by: Abel Vesa <abel.vesa@nxp.com>

> ---
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index 477c523..3187428 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -287,6 +287,7 @@
>  				#gpio-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
> +				gpio-ranges = <&iomuxc 0 10 30>;
>  			};
>  
>  			gpio2: gpio@30210000 {
> @@ -299,6 +300,7 @@
>  				#gpio-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
> +				gpio-ranges = <&iomuxc 0 40 21>;
>  			};
>  
>  			gpio3: gpio@30220000 {
> @@ -311,6 +313,7 @@
>  				#gpio-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
> +				gpio-ranges = <&iomuxc 0 61 26>;
>  			};
>  
>  			gpio4: gpio@30230000 {
> @@ -323,6 +326,7 @@
>  				#gpio-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
> +				gpio-ranges = <&iomuxc 0 87 32>;
>  			};
>  
>  			gpio5: gpio@30240000 {
> @@ -335,6 +339,7 @@
>  				#gpio-cells = <2>;
>  				interrupt-controller;
>  				#interrupt-cells = <2>;
> +				gpio-ranges = <&iomuxc 0 119 30>;
>  			};
>  
>  			tmu: tmu@30260000 {
> -- 
> 2.7.4
>
Shawn Guo July 18, 2019, 8:14 a.m. UTC | #2 
On Tue, Jul 02, 2019 at 09:43:59AM +0800, Anson.Huang@nxp.com wrote:
> From: Anson Huang <Anson.Huang@nxp.com>
> 
> Add "gpio-ranges" property to establish connections between GPIOs
> and PINs on i.MX8MQ pinctrl driver.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Applied both, thanks.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 477c523..3187428 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -287,6 +287,7 @@ 
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 10 30>;
 			};
 
 			gpio2: gpio@30210000 {
@@ -299,6 +300,7 @@ 
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 40 21>;
 			};
 
 			gpio3: gpio@30220000 {
@@ -311,6 +313,7 @@ 
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 61 26>;
 			};
 
 			gpio4: gpio@30230000 {
@@ -323,6 +326,7 @@ 
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 87 32>;
 			};
 
 			gpio5: gpio@30240000 {
@@ -335,6 +339,7 @@ 
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 119 30>;
 			};
 
 			tmu: tmu@30260000 {