diff mbox series

[v5,2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR

Message ID 2a181b502eb69f8506873e2ff93239cbb4108e98.1563533343.git.vitor.soares@synopsys.com (mailing list archive)
State New, archived
Headers show
Series Add ST lsm6dso i3c support | expand

Commit Message

Vitor Soares July 19, 2019, 11:19 a.m. UTC 
For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
spi and i2c mode.

The LSM6DSO and LSM6DSR are also i3c capable so let's give i3c support to
them.

Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
Changes in v5:
  Move regmap_config declaration inside st_lsm6dsx_i3c_probe()
  Fix warning [-Wint-to-void-pointer-cast] when compiling in 64-bit arch

Changes in v4:
  Remove hw_id variable

Changes in v3:
  Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
  Use st_lsm6dsx_probe new form

Changes in v2:
  Add support for LSM6DSR
  Set pm_ops to st_lsm6dsx_pm_ops

 drivers/iio/imu/st_lsm6dsx/Kconfig          |  8 +++-
 drivers/iio/imu/st_lsm6dsx/Makefile         |  1 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 57 +++++++++++++++++++++++++++++
 3 files changed, 65 insertions(+), 1 deletion(-)
 create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c

Comments

Boris Brezillon July 19, 2019, 12:51 p.m. UTC | #1 
On Fri, 19 Jul 2019 13:19:05 +0200
Vitor Soares <Vitor.Soares@synopsys.com> wrote:

> For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> spi and i2c mode.
> 
> The LSM6DSO and LSM6DSR are also i3c capable so let's give i3c support to
> them.
> 
> Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>

Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

> ---
> Changes in v5:
>   Move regmap_config declaration inside st_lsm6dsx_i3c_probe()
>   Fix warning [-Wint-to-void-pointer-cast] when compiling in 64-bit arch
> 
> Changes in v4:
>   Remove hw_id variable
> 
> Changes in v3:
>   Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
>   Use st_lsm6dsx_probe new form
> 
> Changes in v2:
>   Add support for LSM6DSR
>   Set pm_ops to st_lsm6dsx_pm_ops
> 
>  drivers/iio/imu/st_lsm6dsx/Kconfig          |  8 +++-
>  drivers/iio/imu/st_lsm6dsx/Makefile         |  1 +
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 57 +++++++++++++++++++++++++++++
>  3 files changed, 65 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> 
> diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
> index 9e59297..6b5a73c 100644
> --- a/drivers/iio/imu/st_lsm6dsx/Kconfig
> +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
> @@ -1,11 +1,12 @@
>  
>  config IIO_ST_LSM6DSX
>  	tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
> -	depends on (I2C || SPI)
> +	depends on (I2C || SPI || I3C)
>  	select IIO_BUFFER
>  	select IIO_KFIFO_BUF
>  	select IIO_ST_LSM6DSX_I2C if (I2C)
>  	select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
> +	select IIO_ST_LSM6DSX_I3C if (I3C)
>  	help
>  	  Say yes here to build support for STMicroelectronics LSM6DSx imu
>  	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
> @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI
>  	tristate
>  	depends on IIO_ST_LSM6DSX
>  	select REGMAP_SPI
> +
> +config IIO_ST_LSM6DSX_I3C
> +	tristate
> +	depends on IIO_ST_LSM6DSX
> +	select REGMAP_I3C
> diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
> index e5f733c..c676965 100644
> --- a/drivers/iio/imu/st_lsm6dsx/Makefile
> +++ b/drivers/iio/imu/st_lsm6dsx/Makefile
> @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
>  obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
>  obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
>  obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
> +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> new file mode 100644
> index 0000000..57e6331
> --- /dev/null
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> @@ -0,0 +1,57 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
> + *
> + * Author: Vitor Soares <vitor.soares@synopsys.com>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i3c/device.h>
> +#include <linux/i3c/master.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#include "st_lsm6dsx.h"
> +
> +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
> +	I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
> +	I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
> +
> +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
> +{
> +	struct regmap_config st_lsm6dsx_i3c_regmap_config = {
> +		.reg_bits = 8,
> +		.val_bits = 8,
> +	};
> +	const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
> +							    st_lsm6dsx_i3c_ids);
> +	struct regmap *regmap;
> +
> +	regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
> +			(int)PTR_ERR(regmap));
> +		return PTR_ERR(regmap);
> +	}
> +
> +	return st_lsm6dsx_probe(&i3cdev->dev, 0, (uintptr_t)id->data, regmap);
> +}
> +
> +static struct i3c_driver st_lsm6dsx_driver = {
> +	.driver = {
> +		.name = "st_lsm6dsx_i3c",
> +		.pm = &st_lsm6dsx_pm_ops,
> +	},
> +	.probe = st_lsm6dsx_i3c_probe,
> +	.id_table = st_lsm6dsx_i3c_ids,
> +};
> +module_i3c_driver(st_lsm6dsx_driver);
> +
> +MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
> +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
> +MODULE_LICENSE("GPL v2");
Vitor Soares July 19, 2019, 1:31 p.m. UTC | #2 
From: Boris Brezillon <boris.brezillon@collabora.com>
Date: Fri, Jul 19, 2019 at 13:51:10

> On Fri, 19 Jul 2019 13:19:05 +0200
> Vitor Soares <Vitor.Soares@synopsys.com> wrote:
> 
> > For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> > spi and i2c mode.
> > 
> > The LSM6DSO and LSM6DSR are also i3c capable so let's give i3c support to
> > them.
> > 
> > Signed-off-by: Vitor Soares <vitor.soares@synopsys.com>
> > Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
> 
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Thanks
diff mbox series

Patch

diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 9e59297..6b5a73c 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -1,11 +1,12 @@ 
 
 config IIO_ST_LSM6DSX
 	tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
-	depends on (I2C || SPI)
+	depends on (I2C || SPI || I3C)
 	select IIO_BUFFER
 	select IIO_KFIFO_BUF
 	select IIO_ST_LSM6DSX_I2C if (I2C)
 	select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
+	select IIO_ST_LSM6DSX_I3C if (I3C)
 	help
 	  Say yes here to build support for STMicroelectronics LSM6DSx imu
 	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
@@ -23,3 +24,8 @@  config IIO_ST_LSM6DSX_SPI
 	tristate
 	depends on IIO_ST_LSM6DSX
 	select REGMAP_SPI
+
+config IIO_ST_LSM6DSX_I3C
+	tristate
+	depends on IIO_ST_LSM6DSX
+	select REGMAP_I3C
diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
index e5f733c..c676965 100644
--- a/drivers/iio/imu/st_lsm6dsx/Makefile
+++ b/drivers/iio/imu/st_lsm6dsx/Makefile
@@ -4,3 +4,4 @@  st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
 obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
 obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
 obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
+obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
new file mode 100644
index 0000000..57e6331
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
@@ -0,0 +1,57 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
+ *
+ * Author: Vitor Soares <vitor.soares@synopsys.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i3c/device.h>
+#include <linux/i3c/master.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include "st_lsm6dsx.h"
+
+static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
+	I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
+	I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
+
+static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
+{
+	struct regmap_config st_lsm6dsx_i3c_regmap_config = {
+		.reg_bits = 8,
+		.val_bits = 8,
+	};
+	const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
+							    st_lsm6dsx_i3c_ids);
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
+			(int)PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return st_lsm6dsx_probe(&i3cdev->dev, 0, (uintptr_t)id->data, regmap);
+}
+
+static struct i3c_driver st_lsm6dsx_driver = {
+	.driver = {
+		.name = "st_lsm6dsx_i3c",
+		.pm = &st_lsm6dsx_pm_ops,
+	},
+	.probe = st_lsm6dsx_i3c_probe,
+	.id_table = st_lsm6dsx_i3c_ids,
+};
+module_i3c_driver(st_lsm6dsx_driver);
+
+MODULE_AUTHOR("Vitor Soares <vitor.soares@synopsys.com>");
+MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
+MODULE_LICENSE("GPL v2");