mbox series

[00/10] Add further support for PHYTEC phyBOARD-Segin

Message ID 1562656767-273566-1-git-send-email-s.riedmueller@phytec.de (mailing list archive)
Headers show
Series Add further support for PHYTEC phyBOARD-Segin | expand

Message

Stefan Riedmüller July 9, 2019, 7:19 a.m. UTC
This patchstack adjusts the already existing naming for the PHYTEC
phyBOARD-Segin to the PHYTEC naming scheme that is already used with the
phyCORE-i.MX 6 and the phyBOARD-Mira.

Furthermore it introduces some small fixes and adds support for the PHYTEC
phyCORE-i.MX 6ULL which also comes with the phyBORAD-Segin. It comes in a
full featured option with either NAND flash or eMMC and a low cost option
only with NAND flash.

Stefan Riedmueller (10):
  ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme
  ARM: dts: imx6ul: segin: Add boot media to dts filename
  ARM: dts: imx6ul: segin: Reduce eth drive strength
  ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01
  ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts
  ARM: dts: imx6ul: segin: Only enable NAND if it is populated
  ARM: dts: imx6ul: phycore: Add eMMC at usdhc2
  ARM: dts: imx6ul: segin: Move ECSPI interface to board include file
  ARM: dts: imx6ul: segin: Move machine include to dts files
  ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX
    6ULL

 arch/arm/boot/dts/Makefile                         |  5 +-
 ...-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} | 51 ++++++++----
 ...ull.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} | 42 +++++-----
 ...1.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} | 16 ++--
 ...hyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} | 31 ++++++--
 arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi  | 24 ++++++
 .../boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts  | 93 ++++++++++++++++++++++
 .../boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts  | 93 ++++++++++++++++++++++
 .../boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts  | 45 +++++++++++
 .../boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi | 19 +++++
 arch/arm/boot/dts/imx6ull-phytec-segin.dtsi        | 38 +++++++++
 11 files changed, 409 insertions(+), 48 deletions(-)
 rename arch/arm/boot/dts/{imx6ul-phytec-pcl063.dtsi => imx6ul-phytec-phycore-som.dtsi} (72%)
 rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin-full.dts => imx6ul-phytec-segin-ff-rdk-nand.dts} (51%)
 rename arch/arm/boot/dts/{imx6ul-phytec-peb-eval-01.dtsi => imx6ul-phytec-segin-peb-eval-01.dtsi} (84%)
 rename arch/arm/boot/dts/{imx6ul-phytec-phyboard-segin.dtsi => imx6ul-phytec-segin.dtsi} (91%)
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
 create mode 100644 arch/arm/boot/dts/imx6ull-phytec-segin.dtsi

Comments

Shawn Guo July 23, 2019, 5:39 a.m. UTC | #1
On Tue, Jul 09, 2019 at 09:19:17AM +0200, Stefan Riedmueller wrote:
> This patchstack adjusts the already existing naming for the PHYTEC
> phyBOARD-Segin to the PHYTEC naming scheme that is already used with the
> phyCORE-i.MX 6 and the phyBOARD-Mira.
> 
> Furthermore it introduces some small fixes and adds support for the PHYTEC
> phyCORE-i.MX 6ULL which also comes with the phyBORAD-Segin. It comes in a
> full featured option with either NAND flash or eMMC and a low cost option
> only with NAND flash.
> 
> Stefan Riedmueller (10):
>   ARM: dts: imx6ul: phyboard-segin: Rename dts to PHYTEC name scheme
>   ARM: dts: imx6ul: segin: Add boot media to dts filename
>   ARM: dts: imx6ul: segin: Reduce eth drive strength
>   ARM: dts: imx6ul: segin: Fix LED naming for phyCORE and PEB-EVAL-01
>   ARM: dts: imx6ul: segin: Make FEC and ethphy configurable in dts
>   ARM: dts: imx6ul: segin: Only enable NAND if it is populated
>   ARM: dts: imx6ul: phycore: Add eMMC at usdhc2
>   ARM: dts: imx6ul: segin: Move ECSPI interface to board include file
>   ARM: dts: imx6ul: segin: Move machine include to dts files
>   ARM: dts: imx6ull: Add support for PHYTEC phyBOARD-Segin with i.MX
>     6ULL

I applied the series, but please send a follow-up patch for those
undocumented board compatibles.

Shawn