diff mbox series

[v4,6/7] ARM: defconfig: enable cpufreq driver for RPi

Message ID 20190612182500.4097-7-nsaenzjulienne@suse.de (mailing list archive)
State New, archived
Headers show
Series cpufreq support for Raspberry Pi | expand

Commit Message

Nicolas Saenz Julienne June 12, 2019, 6:24 p.m. UTC 
This enables on both multi_v7_defconfig and bcm2835_defconfig the new
firmware based clock and cpufreq drivers for the Raspberry Pi platform.

In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled,
the conservative governor was selected as default since it better
handles the high frequency transition latency.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
---

Changes since v2:
  - Change default governor to conservative in bcm2835_defconfig
  - Set all as builtin in bcm2835_defconfig

 arch/arm/configs/bcm2835_defconfig  | 9 +++++++++
 arch/arm/configs/multi_v7_defconfig | 2 ++
 2 files changed, 11 insertions(+)

Comments

Stefan Wahren July 23, 2019, 9:33 p.m. UTC | #1 
Am 12.06.19 um 20:24 schrieb Nicolas Saenz Julienne:
> This enables on both multi_v7_defconfig and bcm2835_defconfig the new
> firmware based clock and cpufreq drivers for the Raspberry Pi platform.
>
> In the case of bcm2835_defconfig, as the cpufreq subsystem was disabled,
> the conservative governor was selected as default since it better
> handles the high frequency transition latency.
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Acked-by: Stefan Wahren <stefan.wahren@i2se.com>

Applied to bcm2835-defconfig-next

Thanks
diff mbox series

Patch

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index dcf7610cfe55..519ff58e67b3 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -37,6 +37,14 @@  CONFIG_CMA=y
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 CONFIG_VFP=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_SUSPEND is not set
@@ -132,6 +140,7 @@  CONFIG_DMA_BCM2835=y
 CONFIG_STAGING=y
 CONFIG_SND_BCM2835=m
 CONFIG_VIDEO_BCM2835=m
+CONFIG_CLK_RASPBERRYPI=y
 CONFIG_MAILBOX=y
 CONFIG_BCM2835_MBOX=y
 # CONFIG_IOMMU_SUPPORT is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 6b748f214eae..0fd60a83f768 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -102,6 +102,7 @@  CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 CONFIG_QORIQ_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
@@ -899,6 +900,7 @@  CONFIG_STAGING_BOARD=y
 CONFIG_COMMON_CLK_MAX77686=y
 CONFIG_COMMON_CLK_RK808=m
 CONFIG_COMMON_CLK_S2MPS11=m
+CONFIG_CLK_RASPBERRYPI=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_QCOM_CLK_RPM=y
 CONFIG_APQ_MMCC_8084=y