| Message ID | 20190722185938.9043-5-linux.amoon@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Exynos USB 3.0 PHY tune setting | expand |
On Mon, 22 Jul 2019 at 20:59, Anand Moon <linux.amoon@gmail.com> wrote: > > Tune USB3.0 (PIPE3) PHY TX signal for high and supper > speed data transfer. > > Signed-off-by: Anand Moon <linux.amoon@gmail.com> > --- > drivers/phy/samsung/phy-exynos5-usbdrd.c | 18 +++++++++++++----- > 1 file changed, 13 insertions(+), 5 deletions(-) > > diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c > index 54a513ca15e4..4f16c4f82ae5 100644 > --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c > +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c > @@ -124,8 +124,10 @@ > > #define EXYNOS5_DRD_PHYPARAM1 0x20 > > -#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) > -#define PHYPARAM1_PCS_TXDEEMPH (0x1c) > +#define PHYPARAM1_TX0_TERM_OFFSET(x) __set(x, 30, 26) > +#define PHYPARAM1_TX_SWING_FULL(x) __set(x, 18, 12) > +#define PHYPRAAM1_PCS_TX_DEEMPH_6DB(x) __set(x, 11, 6) > +#define PHYPRAAM1_PCS_TX_DEEMPH_3P5DB(x) __set(x, 5, 0) > > #define EXYNOS5_DRD_PHYTERM 0x24 > > @@ -360,10 +362,16 @@ static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) > { > u32 reg; > > - reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); > /* Set Tx De-Emphasis level */ > - reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; > - reg |= PHYPARAM1_PCS_TXDEEMPH; > + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); > + /* Transmitter Termination Offset */ > + reg |= PHYPARAM1_TX0_TERM_OFFSET(0x5) | > + /* Tx Amplitude (Full Swing mode) */ > + PHYPARAM1_TX_SWING_FULL(0x3F) | > + /* Tx De-Emphasis at 6 dB */ > + PHYPRAAM1_PCS_TX_DEEMPH_6DB(0x20) | > + /* Tx De-Emphasis at 3.5 dB */ > + PHYPRAAM1_PCS_TX_DEEMPH_3P5DB(0x15); How did you get the value? Why you are changing existing values to default ones? Best regards, Krzysztof > writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); > > reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST); > -- > 2.22.0 >
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index 54a513ca15e4..4f16c4f82ae5 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -124,8 +124,10 @@ #define EXYNOS5_DRD_PHYPARAM1 0x20 -#define PHYPARAM1_PCS_TXDEEMPH_MASK (0x1f << 0) -#define PHYPARAM1_PCS_TXDEEMPH (0x1c) +#define PHYPARAM1_TX0_TERM_OFFSET(x) __set(x, 30, 26) +#define PHYPARAM1_TX_SWING_FULL(x) __set(x, 18, 12) +#define PHYPRAAM1_PCS_TX_DEEMPH_6DB(x) __set(x, 11, 6) +#define PHYPRAAM1_PCS_TX_DEEMPH_3P5DB(x) __set(x, 5, 0) #define EXYNOS5_DRD_PHYTERM 0x24 @@ -360,10 +362,16 @@ static void exynos5_usbdrd_pipe3_init(struct exynos5_usbdrd_phy *phy_drd) { u32 reg; - reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); /* Set Tx De-Emphasis level */ - reg &= ~PHYPARAM1_PCS_TXDEEMPH_MASK; - reg |= PHYPARAM1_PCS_TXDEEMPH; + reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); + /* Transmitter Termination Offset */ + reg |= PHYPARAM1_TX0_TERM_OFFSET(0x5) | + /* Tx Amplitude (Full Swing mode) */ + PHYPARAM1_TX_SWING_FULL(0x3F) | + /* Tx De-Emphasis at 6 dB */ + PHYPRAAM1_PCS_TX_DEEMPH_6DB(0x20) | + /* Tx De-Emphasis at 3.5 dB */ + PHYPRAAM1_PCS_TX_DEEMPH_3P5DB(0x15); writel(reg, phy_drd->reg_phy + EXYNOS5_DRD_PHYPARAM1); reg = readl(phy_drd->reg_phy + EXYNOS5_DRD_PHYTEST);
Tune USB3.0 (PIPE3) PHY TX signal for high and supper speed data transfer. Signed-off-by: Anand Moon <linux.amoon@gmail.com> --- drivers/phy/samsung/phy-exynos5-usbdrd.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)