diff mbox series

[v3,1/5] ARM: dts: rockchip: move rk3288-veryon display settings into a separate file

Message ID 20190725162642.250709-2-mka@chromium.org (mailing list archive)
State New, archived
Headers show
Series Add veyron tiger and fievel boards | expand

Commit Message

Matthias Kaehlcke July 25, 2019, 4:26 p.m. UTC 
The chromebook .dtsi file contains common settings for veyron
Chromebooks with eDP displays. Some veyron devices with a display
aren't Chromebooks (e.g. 'tiger' aka 'AOpen Chromebase Mini'), move
display related bits from the chromebook .dtsi into a separate file
to avoid redundant DT settings.

The new file is included from the chromebook .dtsi and can be
included by non-Chromebook devices with a display.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
Changes in v3:
- allow MIT license
- move pinctrl section to the bottom

Changes in v2:
- rebased on v5.4-armsoc/dts32 (0d19541e3b45)
---
 .../boot/dts/rk3288-veyron-chromebook.dtsi    | 115 +---------------
 arch/arm/boot/dts/rk3288-veyron-edp.dtsi      | 124 ++++++++++++++++++
 2 files changed, 125 insertions(+), 114 deletions(-)
 create mode 100644 arch/arm/boot/dts/rk3288-veyron-edp.dtsi

Comments

Doug Anderson July 25, 2019, 4:48 p.m. UTC | #1 
Hi,

On Thu, Jul 25, 2019 at 9:26 AM Matthias Kaehlcke <mka@chromium.org> wrote:
>
> The chromebook .dtsi file contains common settings for veyron
> Chromebooks with eDP displays. Some veyron devices with a display
> aren't Chromebooks (e.g. 'tiger' aka 'AOpen Chromebase Mini'), move
> display related bits from the chromebook .dtsi into a separate file
> to avoid redundant DT settings.
>
> The new file is included from the chromebook .dtsi and can be
> included by non-Chromebook devices with a display.
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> ---
> Changes in v3:
> - allow MIT license
> - move pinctrl section to the bottom
>
> Changes in v2:
> - rebased on v5.4-armsoc/dts32 (0d19541e3b45)
> ---
>  .../boot/dts/rk3288-veyron-chromebook.dtsi    | 115 +---------------
>  arch/arm/boot/dts/rk3288-veyron-edp.dtsi      | 124 ++++++++++++++++++
>  2 files changed, 125 insertions(+), 114 deletions(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Heiko Stübner July 25, 2019, 8:45 p.m. UTC | #2 
Am Donnerstag, 25. Juli 2019, 18:26:38 CEST schrieb Matthias Kaehlcke:
> The chromebook .dtsi file contains common settings for veyron
> Chromebooks with eDP displays. Some veyron devices with a display
> aren't Chromebooks (e.g. 'tiger' aka 'AOpen Chromebase Mini'), move
> display related bits from the chromebook .dtsi into a separate file
> to avoid redundant DT settings.
> 
> The new file is included from the chromebook .dtsi and can be
> included by non-Chromebook devices with a display.
> 
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>

applied for 5.4

Thanks
Heiko
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index 6a28ce345ba0..ffb60f880b39 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -10,6 +10,7 @@ 
 #include <dt-bindings/input/input.h>
 #include "rk3288-veyron.dtsi"
 #include "rk3288-veyron-analog-audio.dtsi"
+#include "rk3288-veyron-edp.dtsi"
 #include "rk3288-veyron-sdmmc.dtsi"
 
 / {
@@ -18,50 +19,6 @@ 
 		i2c20 = &i2c_tunnel;
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		brightness-levels = <
-			  0   1   2   3   4   5   6   7
-			  8   9  10  11  12  13  14  15
-			 16  17  18  19  20  21  22  23
-			 24  25  26  27  28  29  30  31
-			 32  33  34  35  36  37  38  39
-			 40  41  42  43  44  45  46  47
-			 48  49  50  51  52  53  54  55
-			 56  57  58  59  60  61  62  63
-			 64  65  66  67  68  69  70  71
-			 72  73  74  75  76  77  78  79
-			 80  81  82  83  84  85  86  87
-			 88  89  90  91  92  93  94  95
-			 96  97  98  99 100 101 102 103
-			104 105 106 107 108 109 110 111
-			112 113 114 115 116 117 118 119
-			120 121 122 123 124 125 126 127
-			128 129 130 131 132 133 134 135
-			136 137 138 139 140 141 142 143
-			144 145 146 147 148 149 150 151
-			152 153 154 155 156 157 158 159
-			160 161 162 163 164 165 166 167
-			168 169 170 171 172 173 174 175
-			176 177 178 179 180 181 182 183
-			184 185 186 187 188 189 190 191
-			192 193 194 195 196 197 198 199
-			200 201 202 203 204 205 206 207
-			208 209 210 211 212 213 214 215
-			216 217 218 219 220 221 222 223
-			224 225 226 227 228 229 230 231
-			232 233 234 235 236 237 238 239
-			240 241 242 243 244 245 246 247
-			248 249 250 251 252 253 254 255>;
-		default-brightness-level = <128>;
-		enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en>;
-		pwms = <&pwm0 0 1000000 0>;
-		post-pwm-on-delay-ms = <10>;
-		pwm-off-delay-ms = <10>;
-	};
-
 	gpio-charger {
 		compatible = "gpio-charger";
 		charger-type = "mains";
@@ -85,35 +42,6 @@ 
 		};
 	};
 
-	panel: panel {
-		compatible ="innolux,n116bge", "simple-panel";
-		status = "okay";
-		power-supply = <&vcc33_lcd>;
-		backlight = <&backlight>;
-
-		panel-timing {
-			clock-frequency = <74250000>;
-			hactive = <1366>;
-			hfront-porch = <136>;
-			hback-porch = <60>;
-			hsync-len = <30>;
-			hsync-active = <0>;
-			vactive = <768>;
-			vfront-porch = <8>;
-			vback-porch = <12>;
-			vsync-len = <12>;
-			vsync-active = <0>;
-		};
-
-		ports {
-			panel_in: port {
-				panel_in_edp: endpoint {
-					remote-endpoint = <&edp_out_panel>;
-				};
-			};
-		};
-	};
-
 	/* A non-regulated voltage from power supply or battery */
 	vccsys: vccsys {
 		compatible = "regulator-fixed";
@@ -155,33 +83,6 @@ 
 	};
 };
 
-&edp {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&edp_hpd>;
-
-	ports {
-		edp_out: port@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			edp_out_panel: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&panel_in_edp>;
-			};
-		};
-	};
-};
-
-&edp_phy {
-	status = "okay";
-};
-
-&pwm0 {
-	status = "okay";
-};
-
 &rk808 {
 	vcc11-supply = <&vcc_5v>;
 
@@ -234,14 +135,6 @@ 
 	};
 };
 
-&vopl {
-	status = "okay";
-};
-
-&vopl_mmu {
-	status = "okay";
-};
-
 &pinctrl {
 	pinctrl-0 = <
 		/* Common for sleep and wake, but no owners */
@@ -264,12 +157,6 @@ 
 		&bt_dev_wake_sleep
 	>;
 
-	backlight {
-		bl_en: bl-en {
-			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-		};
-	};
-
 	buttons {
 		ap_lid_int_l: ap-lid-int-l {
 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
new file mode 100644
index 000000000000..c36fb0940478
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi
@@ -0,0 +1,124 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Veyron (and derivatives) fragment for the edp displays
+ *
+ * Copyright 2019 Google LLC
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 0>;
+		post-pwm-on-delay-ms = <10>;
+		pwm-off-delay-ms = <10>;
+	};
+
+	panel: panel {
+		compatible ="innolux,n116bge", "simple-panel";
+		status = "okay";
+		power-supply = <&vcc33_lcd>;
+		backlight = <&backlight>;
+
+		panel-timing {
+			clock-frequency = <74250000>;
+			hactive = <1366>;
+			hfront-porch = <136>;
+			hback-porch = <60>;
+			hsync-len = <30>;
+			hsync-active = <0>;
+			vactive = <768>;
+			vfront-porch = <8>;
+			vback-porch = <12>;
+			vsync-len = <12>;
+			vsync-active = <0>;
+		};
+
+		ports {
+			panel_in: port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+};
+
+&edp {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd>;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_out_panel: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&edp_phy {
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
+&pinctrl {
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};