diff mbox series

[v5,2/7] dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings

Message ID 20190726092332.25202-3-govinds@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series Add non PAS wcss Q6 support for QCS404 | expand

Commit Message

Govind Singh July 26, 2019, 9:23 a.m. UTC
Add devicetree binding for the Q6SSTOP clock controller found in QCS404.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
---
 .../bindings/clock/qcom,q6sstopcc.txt         | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100755 Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt

Comments

Stephen Boyd July 26, 2019, 7:43 p.m. UTC | #1
Quoting Govind Singh (2019-07-26 02:23:27)
> Add devicetree binding for the Q6SSTOP clock controller found in QCS404.
> 
> Signed-off-by: Govind Singh <govinds@codeaurora.org>

If this patch goes again, please convert to YAML.

> ---
>  .../bindings/clock/qcom,q6sstopcc.txt         | 26 +++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100755 Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt
> new file mode 100755
> index 000000000000..157bb52f9dc4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt
> @@ -0,0 +1,26 @@
> +Qualcomm Q6SSTOP Clock Controller Binding
> +-----------------------------------------------
> +
> +Required properties :
> +- compatible           : shall contain "qcom,qcs404-q6sstopcc"
> +- #clock-cells         : from common clock binding, shall contain 1
> +- reg                  : shall contain base register address and size,
> +                         in the order
> +                       Index 0 maps to Q6SSTOP clocks register region
> +                       Index 1 maps to Q6SSTOP_TCSR register region
> +
> +Optional properties :
> +- reg-names    : register names of WCSS domain
> +                "q6sstop_cc", "q6sstop_tcsr".
> +
> +Example:
> +The below node has to be defined in the cases where the WCSS peripheral loader
> +would bring the subsystem out of reset.
> +
> +       q6sstopcc: clock-controller@7500000 {
> +               compatible = "qcom,qcs404-q6sstopcc";
> +               reg = <0x7500000 0x4e000>, <0x7550000 0x10000>;
> +               reg-names = "q6sstop_cc", "q6sstop_tcsr";
> +               clocks = <&gcc GCC_WCSS_Q6_AHB_CLK>;

This isn't described in the binding. Are there clocks that go here?
Please add them to the binding.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt
new file mode 100755
index 000000000000..157bb52f9dc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.txt
@@ -0,0 +1,26 @@ 
+Qualcomm Q6SSTOP Clock Controller Binding
+-----------------------------------------------
+
+Required properties :
+- compatible		: shall contain "qcom,qcs404-q6sstopcc"
+- #clock-cells		: from common clock binding, shall contain 1
+- reg			: shall contain base register address and size,
+			  in the order
+			Index 0 maps to Q6SSTOP clocks register region
+			Index 1 maps to Q6SSTOP_TCSR register region
+
+Optional properties :
+- reg-names	: register names of WCSS domain
+		 "q6sstop_cc", "q6sstop_tcsr".
+
+Example:
+The below node has to be defined in the cases where the WCSS peripheral loader
+would bring the subsystem out of reset.
+
+	q6sstopcc: clock-controller@7500000 {
+		compatible = "qcom,qcs404-q6sstopcc";
+		reg = <0x7500000 0x4e000>, <0x7550000 0x10000>;
+		reg-names = "q6sstop_cc", "q6sstop_tcsr";
+		clocks = <&gcc GCC_WCSS_Q6_AHB_CLK>;
+		#clock-cells = <1>;
+	};