| Message ID | 1563543645-20804-2-git-send-email-linux@roeck-us.net (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On Fri, Jul 19, 2019 at 6:41 AM Guenter Roeck <linux@roeck-us.net> wrote: > > The riscv uart needs valid clocks. This requires a refereence > to the clock node. Since the SOC clock is not emulated by qemu, > add a reference to a fixed clock instead. The clock-frequency > entry in the uart node does not seem to be necessary, so drop it. > > In addition to a reference to the clock, the driver also needs > an aliases entry for the serial node. Add it as well. > > Without this patch, the serial driver fails to instantiate with > the following error message. > > sifive-serial 10013000.uart: unable to find controller clock > sifive-serial: probe of 10013000.uart failed with error -2 > > when trying to boot Linux. > > Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Alistair > --- > hw/riscv/sifive_u.c | 19 +++++++++++++++++-- > 1 file changed, 17 insertions(+), 2 deletions(-) > > diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c > index 0657046..5a221c6 100644 > --- a/hw/riscv/sifive_u.c > +++ b/hw/riscv/sifive_u.c > @@ -76,6 +76,7 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, > char *nodename; > char ethclk_names[] = "pclk\0hclk\0tx_clk"; > uint32_t plic_phandle, ethclk_phandle, phandle = 1; > + uint32_t uartclk_phandle; > > fdt = s->fdt = create_device_tree(&s->fdt_size); > if (!fdt) { > @@ -226,6 +227,17 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, > qemu_fdt_setprop_cells(fdt, nodename, "reg", 0x0); > g_free(nodename); > > + uartclk_phandle = phandle++; > + nodename = g_strdup_printf("/soc/uartclk"); > + qemu_fdt_add_subnode(fdt, nodename); > + qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock"); > + qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0); > + qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 3686400); > + qemu_fdt_setprop_cell(fdt, nodename, "phandle", uartclk_phandle); > + qemu_fdt_setprop_cell(fdt, nodename, "linux,phandle", uartclk_phandle); > + uartclk_phandle = qemu_fdt_get_phandle(fdt, nodename); > + g_free(nodename); > + > nodename = g_strdup_printf("/soc/uart@%lx", > (long)memmap[SIFIVE_U_UART0].base); > qemu_fdt_add_subnode(fdt, nodename); > @@ -233,8 +245,7 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, > qemu_fdt_setprop_cells(fdt, nodename, "reg", > 0x0, memmap[SIFIVE_U_UART0].base, > 0x0, memmap[SIFIVE_U_UART0].size); > - qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", > - SIFIVE_U_CLOCK_FREQ / 2); > + qemu_fdt_setprop_cells(fdt, nodename, "clocks", uartclk_phandle); > qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle); > qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ); > > @@ -243,6 +254,10 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, > if (cmdline) { > qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline); > } > + > + qemu_fdt_add_subnode(fdt, "/aliases"); > + qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename); > + > g_free(nodename); > > return fdt; > -- > 2.7.4 > >
diff --git a/hw/riscv/sifive_u.c b/hw/riscv/sifive_u.c index 0657046..5a221c6 100644 --- a/hw/riscv/sifive_u.c +++ b/hw/riscv/sifive_u.c @@ -76,6 +76,7 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, char *nodename; char ethclk_names[] = "pclk\0hclk\0tx_clk"; uint32_t plic_phandle, ethclk_phandle, phandle = 1; + uint32_t uartclk_phandle; fdt = s->fdt = create_device_tree(&s->fdt_size); if (!fdt) { @@ -226,6 +227,17 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, qemu_fdt_setprop_cells(fdt, nodename, "reg", 0x0); g_free(nodename); + uartclk_phandle = phandle++; + nodename = g_strdup_printf("/soc/uartclk"); + qemu_fdt_add_subnode(fdt, nodename); + qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock"); + qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0); + qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 3686400); + qemu_fdt_setprop_cell(fdt, nodename, "phandle", uartclk_phandle); + qemu_fdt_setprop_cell(fdt, nodename, "linux,phandle", uartclk_phandle); + uartclk_phandle = qemu_fdt_get_phandle(fdt, nodename); + g_free(nodename); + nodename = g_strdup_printf("/soc/uart@%lx", (long)memmap[SIFIVE_U_UART0].base); qemu_fdt_add_subnode(fdt, nodename); @@ -233,8 +245,7 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, qemu_fdt_setprop_cells(fdt, nodename, "reg", 0x0, memmap[SIFIVE_U_UART0].base, 0x0, memmap[SIFIVE_U_UART0].size); - qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", - SIFIVE_U_CLOCK_FREQ / 2); + qemu_fdt_setprop_cells(fdt, nodename, "clocks", uartclk_phandle); qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle); qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ); @@ -243,6 +254,10 @@ static void *create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, if (cmdline) { qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline); } + + qemu_fdt_add_subnode(fdt, "/aliases"); + qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename); + g_free(nodename); return fdt;
The riscv uart needs valid clocks. This requires a refereence to the clock node. Since the SOC clock is not emulated by qemu, add a reference to a fixed clock instead. The clock-frequency entry in the uart node does not seem to be necessary, so drop it. In addition to a reference to the clock, the driver also needs an aliases entry for the serial node. Add it as well. Without this patch, the serial driver fails to instantiate with the following error message. sifive-serial 10013000.uart: unable to find controller clock sifive-serial: probe of 10013000.uart failed with error -2 when trying to boot Linux. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- hw/riscv/sifive_u.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)