| Message ID | 20190727044113.3865-1-vt@altlinux.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2] ima-evm-utils: Add some tests for evmctl | expand |
On Sat, Jul 27, 2019 at 07:41:13AM +0300, Vitaly Chikunov wrote: > Run `make check' to execute the tests. > Currently only ima_hash, ima_sign, and ima_verify are tested. > > Signed-off-by: Vitaly Chikunov <vt@altlinux.org> > .... > +_evmctl_run() { > + local cmd=$1 out=$1-$$.out > + # Additional parameters: > + # FOR: append to text as 'for $FOR' > + # DEL: additional files to rm if test failed > + > + set -- evmctl $V ${ENGINE:+--engine $ENGINE} "$@" > + echo $YELLOW$TMODE $*$NORM > + eval "$@" >$out 2>&1 > + ret=$? > + > + if [ $ret -ge 126 -a $ret -lt 255 ]; then > + echo $RED > + echo "evmctl $cmd failed hard with ($ret) ${FOR:+for $FOR}" > + sed 's/^/ /' $out > + echo $NORM > + rm $out $DEL > + FOR= DEL= > + return $SKIP Should be `return $HARDFAIL`.
Vitaly, On Sat, 2019-07-27 at 07:41 +0300, Vitaly Chikunov wrote: > Run `make check' to execute the tests. > Currently only ima_hash, ima_sign, and ima_verify are tested. > > Signed-off-by: Vitaly Chikunov <vt@altlinux.org> > --- > Changelog since v1: > - Apply suggestions by Petr Vorel: > - Rename function names and variables to be more understandable. > - Rename tests/functions to tests/functions.sh. > - Define exit codes (77, 99, ...) as variables. > - Added more comments and remove single letter variables (for Mimi Zohar). Thanks. > - Move getfattr check into function. > - Move evmctl run and check into single function. > - Add sign/verify tests for v1 signatures. > - Minor improvements. > - Since I still edit all 5 files I did not split the patch into multiple > commits to separate the files, otherwise editing will become too > complicated, as I ought to continuously rebase and edit different > commits. This was really non-productive suggestion Ok, but the review will be broken up. For now, the comments below are limited to tests/Makefile.am, tests/functions.sh and tests/ima_hash.test. Some of the comments are intrusive, so I'm going to hold off on reviewing the other tests. > > Please test the tests. > > Makefile.am | 2 +- > configure.ac | 1 + > tests/Makefile.am | 15 ++++ > tests/functions.sh | 218 ++++++++++++++++++++++++++++++++++++++++++++++++++ > tests/gen-keys.sh | 90 +++++++++++++++++++++ > tests/ima_hash.test | 72 +++++++++++++++++ > tests/ima_sign.test | 211 ++++++++++++++++++++++++++++++++++++++++++++++++ > tests/ima_verify.test | 93 +++++++++++++++++++++ > 8 files changed, 701 insertions(+), 1 deletion(-) > create mode 100644 tests/Makefile.am > create mode 100755 tests/functions.sh > create mode 100755 tests/gen-keys.sh > create mode 100755 tests/ima_hash.test > create mode 100755 tests/ima_sign.test > create mode 100755 tests/ima_verify.test > > diff --git a/tests/Makefile.am b/tests/Makefile.am > new file mode 100644 > index 0000000..145ea30 > --- /dev/null > +++ b/tests/Makefile.am > @@ -0,0 +1,15 @@ > +check_SCRIPTS = > +TESTS = $(check_SCRIPTS) > + > +check_SCRIPTS += ima_hash.test ima_verify.test ima_sign.test > + > +# ima_verify depends on results of ima_hash > +ima_verify.log: ima_sign.log > + > +clean-local: > + -rm -f *.txt *.out *.sig *.sig2 > + > +distclean: distclean-keys > +.PHONY: distclean-keys > +distclean-keys: > + ./gen-keys.sh clean Autotools generates "test-driver". Should it be added to git-ignore? > diff --git a/tests/functions.sh b/tests/functions.sh > new file mode 100755 > index 0000000..8794120 > --- /dev/null > +++ b/tests/functions.sh > @@ -0,0 +1,218 @@ > +#!/bin/bash > +# > +# ima-evm-utils tests bash functions > +# > +# Copyright (C) 2019 Vitaly Chikunov <vt@altlinux.org> > +# > +# This program is free software; you can redistribute it and/or modify > +# it under the terms of the GNU General Public License as published by > +# the Free Software Foundation; either version 2, or (at your option) > +# any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > + Should we be using SPDX, at least for new files? > +# tests accounting > +declare -i testspass=0 testsfail=0 testsskip=0/ > + > +# exit codes (compatible with automake) > +declare -r OK=0 > +declare -r FAIL=1 > +declare -r HARDFAIL=99 # hard failure no matter testing mode > +declare -r SKIP=77 # skip test > + > +# you can set env VERBOSE=1 to see more output from evmctl > +V=vvvv > +V=${V:0:$VERBOSE} > +V=${V:+-$V} > + > +# require particular executables to be present > +_require() { > + ret= > + for i; do > + if ! type $i; then "type" is a bashism. > + echo "$i is required for test" > + ret=1 > + fi > + done > + [ $ret ] && exit $HARDFAIL > +} > + > +# only allow color output on tty > +if tty -s; then > + RED=$'\e[1;31m' > + GREEN=$'\e[1;32m' > + YELLOW=$'\e[1;33m' > + BLUE=$'\e[1;34m' > + CYAN=$'\e[1;36m' > + NORM=$'\e[m' > +fi > + > +# Define FAILEARLY to exit testing on the first error. > +exit_early() { > + if [ $FAILEARLY ]; then > + exit $1 > + fi > +} I would group all of the environment variable function checking together at the top of functions.sh. > + > +# Test mode determined by TNEG variable: > +# undefined: to positive testing > +# defined: negative testing > +TNEG= > +TMODE=+ > + > +# Eval positive test and account its result > +pos() { > + TNEG= TMODE=+ > + [ "$VERBOSE" ] && echo "Start positive test $*" > + eval "$@" > + E=$? > + [ "$VERBOSE" ] && echo "Stop ($E) positive test $*" > + case $E in > + 0) testspass+=1 ;; > + 77) testsskip+=1 ;; > + 99) testsfail+=1; exit_early 1 ;; > + *) testsfail+=1; exit_early 2 ;; > + esac > +} > + > +# Eval negative test and accoutn its result > +neg() { > + TNEG=1 TMODE=- > + [ "$VERBOSE" ] && echo "Start negative test $*" > + eval "$@" > + E=$? > + [ "$VERBOSE" ] && echo "Stop ($E) negative test $*" > + case $E in > + 0) testsfail+=1; exit_early 3 ;; > + 77) testsskip+=1 ;; > + 99) testsfail+=1; exit_early 4 ;; > + *) testspass+=1 ;; > + esac > + TNEG= # Restore default > +} > The functions "pos" and "neg" are written very concisely, but they are part of a common set of functions, which are the crux of the tests scripts. I'm really hesitant about having common functions that execute any command passed to it, without any form of verification. > +# return true if current test is positive > +_is_positive_test() { > + [ -z "$TNEG" ] > +} > + > +# return true if current test is negative > +_is_negative_test() { > + [ "$TNEG" ] > +} > + > +# Color following text to red if it's real error > +red_if_pos() { > + _is_positive_test && echo $@ $RED > +} > + > +norm_if_pos() { > + _is_positive_test && echo $@ $NORM > +} > + > +DEL= > +FOR= > +# _evmctl_run should be run as `_evmctl_run ... || return' > +_evmctl_run() { > + local cmd=$1 out=$1-$$.out > + # Additional parameters: > + # FOR: append to text as 'for $FOR' > + # DEL: additional files to rm if test failed > + > + set -- evmctl $V ${ENGINE:+--engine $ENGINE} "$@" > + echo $YELLOW$TMODE $*$NORM > + eval "$@" >$out 2>&1 Here at least the command is limited to "evmctl". Is there any benefit to using "set --", as opposed to defining a local variable and executing it? Is this simply a question of style? > + ret=$? > + > + if [ $ret -ge 126 -a $ret -lt 255 ]; then > + echo $RED > + echo "evmctl $cmd failed hard with ($ret) ${FOR:+for $FOR}" > + sed 's/^/ /' $out > + echo $NORM > + rm $out $DEL > + FOR= DEL= > + return $SKIP > + elif [ $ret -gt 0 ]; then > + red_if_pos > + echo "evmctl $cmd failed" ${TNEG:+properly} "with ($ret) ${FOR:+for $FOR}" > + sed 's/^/ /' $out > + norm_if_pos > + rm $out $DEL > + FOR= DEL= > + return $FAIL > + elif _is_negative_test; then > + echo $RED > + echo "evmctl $cmd wrongly succeeded ${FOR:+for $FOR}" > + sed 's/^/ /' $out > + echo $NORM > + else > + [ "$VERBOSE" ] && sed 's/^/ /' $out > + fi > + rm $out > + FOR= DEL= > + return $OK > +} > + > +_extract_ima_xattr() { > + local file=$1 out=$2 pref=$3 > + > + getfattr -n user.ima -e hex $file \ > + | grep ^user.ima= \ > + | sed s/^user.ima=$pref// \ > + | xxd -r -p > $out > +} > + > +_test_ima_xattr() { > + local file=$1 pref=$2 > + > + if ! getfattr -n user.ima -e hex $file | egrep -qx "user.ima=$pref"; then > + red_if_pos > + echo "Did not find expected hash${FOR:+ for $FOR}:" > + echo " user.ima=$pref" > + echo "" > + echo "Actual output below:" > + getfattr -n user.ima -e hex $file | sed 's/^/ /' > + norm_if_pos > + rm $file > + FOR= > + return $FAIL > + fi > + FOR= > +} > + > +_enable_gost_engine() { > + # Do not enable if it's already working (enabled by user) > + if ! openssl md_gost12_256 /dev/null >/dev/null 2>&1 \ > + && openssl engine gost >/dev/null 2>&1; then > + ENGINE=gost > + fi > +} With gost provided as an Openssl engine, is it possible to be able to execute the first command without the gost engine enabled? With commit 782224f33cd7 ("ima-evm-utils: Rework openssl init"), I'm now wondering if the "--engine e' option is still needed? > + > +# Show test stats and exit into automake test system > +# with proper exit code (same as ours). > +_report_exit() { > + if [ $testsfail -gt 0 ]; then > + echo "==============================" > + echo "Run with FAILEARLY=1 $0 $@" > + echo "To stop after first failure" > + echo "==============================" > + fi > + [ $testspass -gt 0 ] && echo -n $GREEN || echo -n $NORM > + echo -n "PASS: $testspass" > + [ $testsskip -gt 0 ] && echo -n $YELLOW || echo -n $NORM > + echo -n " SKIP: $testsskip" > + [ $testsfail -gt 0 ] && echo -n $RED || echo -n $NORM > + echo " FAIL: $testsfail" > + echo $NORM > + if [ $testsfail -gt 0 ]; then > + exit $FAIL > + elif [ $testspass -gt 0 ]; then > + exit $OK > + else > + exit $SKIP > + fi > +} > diff --git a/tests/ima_hash.test b/tests/ima_hash.test > new file mode 100755 > index 0000000..d4bfe19 > --- /dev/null > +++ b/tests/ima_hash.test > @@ -0,0 +1,72 @@ > +#!/bin/bash > +# > +# evmctl ima_hash tests > +# > +# Copyright (C) 2019 Vitaly Chikunov <vt@altlinux.org> > +# > +# This program is free software; you can redistribute it and/or modify > +# it under the terms of the GNU General Public License as published by > +# the Free Software Foundation; either version 2, or (at your option) > +# any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > + > +cd $(dirname $0) > +PATH=../src:$PATH > +source ./functions.sh > +_require evmctl openssl > + > +# Check with constant > +check_const() { This function comment doesn't provide any more details than the function name. Please either rename this function (eg. check_xattr) or expand the function comment. > + local alg=$1 pref=$2 hash=$3 file=$4 > + > + FOR=$alg DEL=$file Why not use ALG=$alg and FILE=$file as the global variable names? > + _evmctl_run ima_hash --hashalgo $alg --xattr-user $file || return > + FOR=$alg \ > + _test_ima_xattr $file $pref$hash || return > + rm $file > + return $OK > +} > + > +check() { > + local alg=$1 pref=$2 hash=$3 > + local file=$alg-hash.txt > + > + rm -f $file > + touch $file > + cmd="openssl dgst ${ENGINE:+-engine $ENGINE} -$alg $file" > + echo - $cmd > + hash=$(set -o pipefail; eval "$cmd" 2>/dev/null | cut -d' ' -f2) Is there a reason for not executing $cmd directly? Is it safer calling "pipefail" and "eval"? Is this a question of style? > + if [ $? -ne 0 ] && _is_positive_test; then > + echo $CYAN"$alg test is skipped"$NORM > + rm $file > + return $SKIP > + fi > + check_const $alg $pref "$hash" $file > +} > + > +# check args: algo prefix hex-hash The first keyword - test type - is missing in the comment above. It would be clearer if instead of "pos" or "neg", the key words included the words "pass" and "fail", to indicate that the test is expected to pass or fail. Mimi > +pos check md4 0x01 > +pos check md5 0x01 > +pos check sha1 0x01 > +neg check SHA1 0x01 # uppercase > +neg check sha512-224 0x01 # valid for pkcs1 > +neg check sha512-256 0x01 # valid for pkcs1 > +neg check unknown 0x01 # nonexistent > +pos check sha224 0x0407 > +pos check sha256 0x0404 > +pos check sha384 0x0405 > +pos check sha512 0x0406 > +pos check rmd160 0x0403 > +neg check sm3 0x01 > +neg check sm3-256 0x01 > +_enable_gost_engine > +pos check md_gost12_256 0x0412 > +pos check streebog256 0x0412 > +pos check md_gost12_512 0x0413 > +pos check streebog512 0x0413 > + > +_report_exit >
Mimi, On Sun, Jul 28, 2019 at 01:17:47PM -0400, Mimi Zohar wrote: > On Sat, 2019-07-27 at 07:41 +0300, Vitaly Chikunov wrote: > > - Since I still edit all 5 files I did not split the patch into multiple > > commits to separate the files, otherwise editing will become too > > complicated, as I ought to continuously rebase and edit different > > commits. This was really non-productive suggestion > > Ok, but the review will be broken up. For now, the comments below are > limited to tests/Makefile.am, tests/functions.sh and > tests/ima_hash.test. Some of the comments are intrusive, so I'm going > to hold off on reviewing the other tests. This is good, since I am reworking ima_sign/ima_verify tests into a single test that will also cover EVM sign/verify. > Autotools generates "test-driver". Should it be added to git-ignore? Didn't notice this. > Should we be using SPDX, at least for new files? OK. > > + if ! type $i; then > > "type" is a bashism. Tests are on bash. > > +# Define FAILEARLY to exit testing on the first error. > > +exit_early() { > > + if [ $FAILEARLY ]; then > > + exit $1 > > + fi > > +} > > I would group all of the environment variable function checking > together at the top of functions.sh. Some functions check VERBOSE should they be on top too? Or you meant this is just variable checking function? It isn't. > The functions "pos" and "neg" are written very concisely, but they are > part of a common set of functions, which are the crux of the tests > scripts. I'm really hesitant about having common functions that > execute any command passed to it, without any form of verification. What verification and why? > > + set -- evmctl $V ${ENGINE:+--engine $ENGINE} "$@" > > + echo $YELLOW$TMODE $*$NORM > > + eval "$@" >$out 2>&1 > > Here at least the command is limited to "evmctl". This is emvctl runner. pos/neg can and should run anything that needs their exit code be checked and accounted as test result. > Is there any benefit to using "set --", as opposed to defining a local > variable and executing it? Is this simply a question of style? I will make it using variable. > > +_enable_gost_engine() { > > + # Do not enable if it's already working (enabled by user) > > + if ! openssl md_gost12_256 /dev/null >/dev/null 2>&1 \ > > + && openssl engine gost >/dev/null 2>&1; then > > + ENGINE=gost > > + fi > > +} > > With gost provided as an Openssl engine, is it possible to be able to > execute the first command without the gost engine enabled? With > commit 782224f33cd7 ("ima-evm-utils: Rework openssl init"), I don't understand question. What is 'first command'? `openssl md_gost12_256` will not work if gost-engine is not configured somehow. > I'm now wondering if the "--engine e' option is still needed? It's needed. Why you thinking it doesn't? Commit 782224f33cd7 will not load gost (or any other) engine on its own. > > +# Check with constant > > +check_const() { > > This function comment doesn't provide any more details than the > function name. Please either rename this function (eg. check_xattr) > or expand the function comment. OK. (check* was supposed to be top-level tests. I will change this in v3.) > > + local alg=$1 pref=$2 hash=$3 file=$4 > > + > > + FOR=$alg DEL=$file > > Why not use ALG=$alg and FILE=$file as the global variable names? check was called once for every algo. Are you proposing to change call like check_const sha1 0x01 sha1-hash.txt to ALG=sha1 FILE=sha1-hash.txt check_const 0x01 ? (I tried to put every mandatory argument into a argument list.) > > + cmd="openssl dgst ${ENGINE:+-engine $ENGINE} -$alg $file" > > + echo - $cmd > > + hash=$(set -o pipefail; eval "$cmd" 2>/dev/null | cut -d' ' -f2) > > Is there a reason for not executing $cmd directly? Is it safer > calling "pipefail" and "eval"? Is this a question of style? I will remove eval (it also don't let me pass empty arguments into called functions). `pipefail' is needed, so I can see exit code of $cmd and not of `cut' in $?. > > + if [ $? -ne 0 ] && _is_positive_test; then > > + echo $CYAN"$alg test is skipped"$NORM > > + rm $file > > + return $SKIP > > + fi > > + check_const $alg $pref "$hash" $file > > +} > > + > > +# check args: algo prefix hex-hash > > The first keyword - test type - is missing in the comment above. It > would be clearer if instead of "pos" or "neg", the key words included > the words "pass" and "fail", to indicate that the test is expected to > pass or fail. pass and fail looks like imperative statements, and not like something that will check other thing to pass or fail. I will rename them to something else. Thanks for the review!
On Mon, 2019-07-29 at 02:40 +0300, Vitaly Chikunov wrote: > Mimi, > > On Sun, Jul 28, 2019 at 01:17:47PM -0400, Mimi Zohar wrote: > > On Sat, 2019-07-27 at 07:41 +0300, Vitaly Chikunov wrote: > > > - Since I still edit all 5 files I did not split the patch into multiple > > > commits to separate the files, otherwise editing will become too > > > complicated, as I ought to continuously rebase and edit different > > > commits. This was really non-productive suggestion > > > > Ok, but the review will be broken up. For now, the comments below are > > limited to tests/Makefile.am, tests/functions.sh and > > tests/ima_hash.test. Some of the comments are intrusive, so I'm going > > to hold off on reviewing the other tests. > > This is good, since I am reworking ima_sign/ima_verify tests into a single > test that will also cover EVM sign/verify. > > > Autotools generates "test-driver". Should it be added to git-ignore? > > Didn't notice this. > > > Should we be using SPDX, at least for new files? > > OK. > > > > + if ! type $i; then > > > > "type" is a bashism. > > Tests are on bash. > > > > +# Define FAILEARLY to exit testing on the first error. > > > +exit_early() { > > > + if [ $FAILEARLY ]; then > > > + exit $1 > > > + fi > > > +} > > > > I would group all of the environment variable function checking > > together at the top of functions.sh. > > Some functions check VERBOSE should they be on top too? > > Or you meant this is just variable checking function? It isn't. There isn't a "Usage" or any documentation listing the environment variables. I'm suggesting to at least group them together. > > > The functions "pos" and "neg" are written very concisely, but they are > > part of a common set of functions, which are the crux of the tests > > scripts. I'm really hesitant about having common functions that > > execute any command passed to it, without any form of verification. > > What verification and why? Even though the tests are not running as root, it's still executing "$@", whatever that might be. For ima_hash.test, the first argument is "check". > > > > + set -- evmctl $V ${ENGINE:+--engine $ENGINE} "$@" > > > + echo $YELLOW$TMODE $*$NORM > > > + eval "$@" >$out 2>&1 > > > > Here at least the command is limited to "evmctl". > > This is emvctl runner. pos/neg can and should run anything that needs > their exit code be checked and accounted as test result. > > > Is there any benefit to using "set --", as opposed to defining a local > > variable and executing it? Is this simply a question of style? > > I will make it using variable. > > > > +_enable_gost_engine() { > > > + # Do not enable if it's already working (enabled by user) > > > + if ! openssl md_gost12_256 /dev/null >/dev/null 2>&1 \ > > > + && openssl engine gost >/dev/null 2>&1; then > > > + ENGINE=gost > > > + fi > > > +} > > > > With gost provided as an Openssl engine, is it possible to be able to > > execute the first command without the gost engine enabled? With > > commit 782224f33cd7 ("ima-evm-utils: Rework openssl init"), > > I don't understand question. What is 'first command'? `openssl > md_gost12_256` will not work if gost-engine is not configured somehow. Exactly. "openssl md_gost12_256 /dev/null" (returns 0, but is negated) will succeed only if the engine is enabled. The "openssl engine gost" test will never fail. > > > I'm now wondering if the "--engine e' option is still needed? > > It's needed. Why you thinking it doesn't? Commit 782224f33cd7 will not > load gost (or any other) engine on its own. If the gost engine is enabled in openssl.cnf then we don't need to set "ENGINE=gost". I'm obviously missing something here. > > > > +# Check with constant > > > +check_const() { > > > > This function comment doesn't provide any more details than the > > function name. Please either rename this function (eg. check_xattr) > > or expand the function comment. > > OK. > > (check* was supposed to be top-level tests. I will change this in v3.) > > > > + local alg=$1 pref=$2 hash=$3 file=$4 > > > + > > > + FOR=$alg DEL=$file > > > > Why not use ALG=$alg and FILE=$file as the global variable names? > > check was called once for every algo. Are you proposing to change > call like Although "FOR" is capitalized, I was reading it as "for". It took me a while to realize that "FOR" and "DEL" are global variables being used in "_evmctl_run". Anything you can do to make it easier to read would be appreciated. Just adding comments would help. > > check_const sha1 0x01 sha1-hash.txt > to > ALG=sha1 FILE=sha1-hash.txt > check_const 0x01 > ? > > (I tried to put every mandatory argument into a argument list.) > > > > + cmd="openssl dgst ${ENGINE:+-engine $ENGINE} -$alg $file" > > > + echo - $cmd > > > + hash=$(set -o pipefail; eval "$cmd" 2>/dev/null | cut -d' ' -f2) > > > > Is there a reason for not executing $cmd directly? Is it safer > > calling "pipefail" and "eval"? Is this a question of style? > > I will remove eval (it also don't let me pass empty arguments into > called functions). `pipefail' is needed, so I can see exit code of > $cmd and not of `cut' in $?. > > > > + if [ $? -ne 0 ] && _is_positive_test; then > > > + echo $CYAN"$alg test is skipped"$NORM > > > + rm $file > > > + return $SKIP > > > + fi > > > + check_const $alg $pref "$hash" $file > > > +} > > > + > > > +# check args: algo prefix hex-hash > > > > The first keyword - test type - is missing in the comment above. It > > would be clearer if instead of "pos" or "neg", the key words included > > the words "pass" and "fail", to indicate that the test is expected to > > pass or fail. > > pass and fail looks like imperative statements, and not like something that > will check other thing to pass or fail. I will rename them to something > else. > > Thanks for the review! While further testing, "_require evmctl openssl" should also make sure that getfattr is installed. Mimi
Mimi, On Sun, Jul 28, 2019 at 09:49:04PM -0400, Mimi Zohar wrote: > On Mon, 2019-07-29 at 02:40 +0300, Vitaly Chikunov wrote: > > > The functions "pos" and "neg" are written very concisely, but they are > > > part of a common set of functions, which are the crux of the tests > > > scripts. I'm really hesitant about having common functions that > > > execute any command passed to it, without any form of verification. > > > > What verification and why? > > Even though the tests are not running as root, it's still executing > "$@", whatever that might be. For ima_hash.test, the first argument > is "check". I believe this will not add any security at all. As these are purely internal functions. If somebody can call pos/neg they are already able to call just anything they want. This is like protecting awk from running something somehow not verified. > > > > +_enable_gost_engine() { > > > > + # Do not enable if it's already working (enabled by user) > > > > + if ! openssl md_gost12_256 /dev/null >/dev/null 2>&1 \ > > > > + && openssl engine gost >/dev/null 2>&1; then > > > > + ENGINE=gost > > > > + fi > > > > +} > > > > > > With gost provided as an Openssl engine, is it possible to be able to > > > execute the first command without the gost engine enabled? With > > > commit 782224f33cd7 ("ima-evm-utils: Rework openssl init"), > > > > I don't understand question. What is 'first command'? `openssl > > md_gost12_256` will not work if gost-engine is not configured somehow. > > Exactly. "openssl md_gost12_256 /dev/null" (returns 0, but is > negated) will succeed only if the engine is enabled. The "openssl > engine gost" test will never fail. It can return non 0 and check looks correct. For example: debian:~$ openssl md_gost12_256 /dev/null Invalid command 'md_gost12_256'; type "help" for a list. debian:~$ echo $? 1 If there is gost-engine in the system but it's not enabled via config - it will be enabled for tests via `--engine gost' option. > > > I'm now wondering if the "--engine e' option is still needed? > > > > It's needed. Why you thinking it doesn't? Commit 782224f33cd7 will not > > load gost (or any other) engine on its own. > > If the gost engine is enabled in openssl.cnf then we don't need to set > "ENGINE=gost". I'm obviously missing something here. There is two ways to load engine in openssl. I think it is mentioned in the commit messages when this functionality was added to evmctl. 1. One way is via careful editing of openssl config. 2. Another is simply via --engine option. Both ways are supported by openssl tools. (For example curl supports --engine option.) But for tests I thought it would be simpler to use --engine option instead of generating openssl.cnf. If user have already configured, for example system wide, openssl.cnf to load gost-engine this test will not add any option. I think this is flexible. > > (check* was supposed to be top-level tests. I will change this in v3.) > > > > > > + local alg=$1 pref=$2 hash=$3 file=$4 > > > > + > > > > + FOR=$alg DEL=$file > > > > > > Why not use ALG=$alg and FILE=$file as the global variable names? > > > > check was called once for every algo. Are you proposing to change > > call like > > Although "FOR" is capitalized, I was reading it as "for". It took me > a while to realize that "FOR" and "DEL" are global variables being > used in "_evmctl_run". Anything you can do to make it easier to read > would be appreciated. Just adding comments would help. OK > While further testing, "_require evmctl openssl" should also make sure > that getfattr is installed. Thanks!
diff --git a/Makefile.am b/Makefile.am index dba408d..45c6f82 100644 --- a/Makefile.am +++ b/Makefile.am @@ -1,4 +1,4 @@ -SUBDIRS = src +SUBDIRS = src tests dist_man_MANS = evmctl.1 doc_DATA = examples/ima-genkey-self.sh examples/ima-genkey.sh examples/ima-gen-local-ca.sh diff --git a/configure.ac b/configure.ac index 3fc63b3..dccdd92 100644 --- a/configure.ac +++ b/configure.ac @@ -67,6 +67,7 @@ EVMCTL_MANPAGE_DOCBOOK_XSL AC_CONFIG_FILES([Makefile src/Makefile + tests/Makefile packaging/ima-evm-utils.spec ]) AC_OUTPUT diff --git a/tests/Makefile.am b/tests/Makefile.am new file mode 100644 index 0000000..145ea30 --- /dev/null +++ b/tests/Makefile.am @@ -0,0 +1,15 @@ +check_SCRIPTS = +TESTS = $(check_SCRIPTS) + +check_SCRIPTS += ima_hash.test ima_verify.test ima_sign.test + +# ima_verify depends on results of ima_hash +ima_verify.log: ima_sign.log + +clean-local: + -rm -f *.txt *.out *.sig *.sig2 + +distclean: distclean-keys +.PHONY: distclean-keys +distclean-keys: + ./gen-keys.sh clean diff --git a/tests/functions.sh b/tests/functions.sh new file mode 100755 index 0000000..8794120 --- /dev/null +++ b/tests/functions.sh @@ -0,0 +1,218 @@ +#!/bin/bash +# +# ima-evm-utils tests bash functions +# +# Copyright (C) 2019 Vitaly Chikunov <vt@altlinux.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# tests accounting +declare -i testspass=0 testsfail=0 testsskip=0 + +# exit codes (compatible with automake) +declare -r OK=0 +declare -r FAIL=1 +declare -r HARDFAIL=99 # hard failure no matter testing mode +declare -r SKIP=77 # skip test + +# you can set env VERBOSE=1 to see more output from evmctl +V=vvvv +V=${V:0:$VERBOSE} +V=${V:+-$V} + +# require particular executables to be present +_require() { + ret= + for i; do + if ! type $i; then + echo "$i is required for test" + ret=1 + fi + done + [ $ret ] && exit $HARDFAIL +} + +# only allow color output on tty +if tty -s; then + RED=$'\e[1;31m' + GREEN=$'\e[1;32m' + YELLOW=$'\e[1;33m' + BLUE=$'\e[1;34m' + CYAN=$'\e[1;36m' + NORM=$'\e[m' +fi + +# Define FAILEARLY to exit testing on the first error. +exit_early() { + if [ $FAILEARLY ]; then + exit $1 + fi +} + +# Test mode determined by TNEG variable: +# undefined: to positive testing +# defined: negative testing +TNEG= +TMODE=+ + +# Eval positive test and account its result +pos() { + TNEG= TMODE=+ + [ "$VERBOSE" ] && echo "Start positive test $*" + eval "$@" + E=$? + [ "$VERBOSE" ] && echo "Stop ($E) positive test $*" + case $E in + 0) testspass+=1 ;; + 77) testsskip+=1 ;; + 99) testsfail+=1; exit_early 1 ;; + *) testsfail+=1; exit_early 2 ;; + esac +} + +# Eval negative test and accoutn its result +neg() { + TNEG=1 TMODE=- + [ "$VERBOSE" ] && echo "Start negative test $*" + eval "$@" + E=$? + [ "$VERBOSE" ] && echo "Stop ($E) negative test $*" + case $E in + 0) testsfail+=1; exit_early 3 ;; + 77) testsskip+=1 ;; + 99) testsfail+=1; exit_early 4 ;; + *) testspass+=1 ;; + esac + TNEG= # Restore default +} + +# return true if current test is positive +_is_positive_test() { + [ -z "$TNEG" ] +} + +# return true if current test is negative +_is_negative_test() { + [ "$TNEG" ] +} + +# Color following text to red if it's real error +red_if_pos() { + _is_positive_test && echo $@ $RED +} + +norm_if_pos() { + _is_positive_test && echo $@ $NORM +} + +DEL= +FOR= +# _evmctl_run should be run as `_evmctl_run ... || return' +_evmctl_run() { + local cmd=$1 out=$1-$$.out + # Additional parameters: + # FOR: append to text as 'for $FOR' + # DEL: additional files to rm if test failed + + set -- evmctl $V ${ENGINE:+--engine $ENGINE} "$@" + echo $YELLOW$TMODE $*$NORM + eval "$@" >$out 2>&1 + ret=$? + + if [ $ret -ge 126 -a $ret -lt 255 ]; then + echo $RED + echo "evmctl $cmd failed hard with ($ret) ${FOR:+for $FOR}" + sed 's/^/ /' $out + echo $NORM + rm $out $DEL + FOR= DEL= + return $SKIP + elif [ $ret -gt 0 ]; then + red_if_pos + echo "evmctl $cmd failed" ${TNEG:+properly} "with ($ret) ${FOR:+for $FOR}" + sed 's/^/ /' $out + norm_if_pos + rm $out $DEL + FOR= DEL= + return $FAIL + elif _is_negative_test; then + echo $RED + echo "evmctl $cmd wrongly succeeded ${FOR:+for $FOR}" + sed 's/^/ /' $out + echo $NORM + else + [ "$VERBOSE" ] && sed 's/^/ /' $out + fi + rm $out + FOR= DEL= + return $OK +} + +_extract_ima_xattr() { + local file=$1 out=$2 pref=$3 + + getfattr -n user.ima -e hex $file \ + | grep ^user.ima= \ + | sed s/^user.ima=$pref// \ + | xxd -r -p > $out +} + +_test_ima_xattr() { + local file=$1 pref=$2 + + if ! getfattr -n user.ima -e hex $file | egrep -qx "user.ima=$pref"; then + red_if_pos + echo "Did not find expected hash${FOR:+ for $FOR}:" + echo " user.ima=$pref" + echo "" + echo "Actual output below:" + getfattr -n user.ima -e hex $file | sed 's/^/ /' + norm_if_pos + rm $file + FOR= + return $FAIL + fi + FOR= +} + +_enable_gost_engine() { + # Do not enable if it's already working (enabled by user) + if ! openssl md_gost12_256 /dev/null >/dev/null 2>&1 \ + && openssl engine gost >/dev/null 2>&1; then + ENGINE=gost + fi +} + +# Show test stats and exit into automake test system +# with proper exit code (same as ours). +_report_exit() { + if [ $testsfail -gt 0 ]; then + echo "==============================" + echo "Run with FAILEARLY=1 $0 $@" + echo "To stop after first failure" + echo "==============================" + fi + [ $testspass -gt 0 ] && echo -n $GREEN || echo -n $NORM + echo -n "PASS: $testspass" + [ $testsskip -gt 0 ] && echo -n $YELLOW || echo -n $NORM + echo -n " SKIP: $testsskip" + [ $testsfail -gt 0 ] && echo -n $RED || echo -n $NORM + echo " FAIL: $testsfail" + echo $NORM + if [ $testsfail -gt 0 ]; then + exit $FAIL + elif [ $testspass -gt 0 ]; then + exit $OK + else + exit $SKIP + fi +} + diff --git a/tests/gen-keys.sh b/tests/gen-keys.sh new file mode 100755 index 0000000..056cd68 --- /dev/null +++ b/tests/gen-keys.sh @@ -0,0 +1,90 @@ +#!/bin/bash +# +# Generate keys for the tests +# +# Copyright (C) 2019 Vitaly Chikunov <vt@altlinux.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +cd $(dirname $0) +PATH=../src:$PATH +type openssl + +log() { + echo - "$*" + eval "$@" +} + +if [ "$1" = clean ]; then + rm -f test-ca.conf +elif [ ! -e test-ca.conf ]; then +cat > test-ca.conf <<- EOF + [ req ] + distinguished_name = req_distinguished_name + prompt = no + string_mask = utf8only + x509_extensions = v3_ca + + [ req_distinguished_name ] + O = IMA-CA + CN = IMA/EVM certificate signing key + emailAddress = ca@ima-ca + + [ v3_ca ] + basicConstraints=CA:TRUE + subjectKeyIdentifier=hash + authorityKeyIdentifier=keyid:always,issuer +EOF +fi + +# RSA +# Second key will be used for wrong key tests. +for m in 1024 2048; do + if [ "$1" = clean ]; then + rm -f test-rsa$m.cer test-rsa$m.key test-rsa$m.pub + continue + fi + if [ ! -e test-rsa$m.key ]; then + log openssl req -verbose -new -nodes -utf8 -sha1 -days 10000 -batch -x509 \ + -config test-ca.conf \ + -newkey rsa:$m \ + -out test-rsa$m.cer -outform DER \ + -keyout test-rsa$m.key + # for v1 signatures + log openssl pkey -in test-rsa$m.key -out test-rsa$m.pub -pubout + fi +done + +# EC-RDSA +for m in \ + gost2012_256:A \ + gost2012_256:B \ + gost2012_256:C \ + gost2012_512:A \ + gost2012_512:B; do + IFS=':' read -r algo param <<< "$m" + if [ "$1" = clean ]; then + rm -f test-$algo-$param.key test-$algo-$param.cer test-$algo-$param.pub + continue + fi + [ -e test-$algo-$param.key ] && continue + log openssl req -nodes -x509 -utf8 -days 10000 -batch \ + -config test-ca.conf \ + -newkey $algo \ + -pkeyopt paramset:$param \ + -out test-$algo-$param.cer -outform DER \ + -keyout test-$algo-$param.key + log openssl pkey -in test-$algo-$param.key -out test-$algo-$param.pub -pubout +done + +# This script leaves test-ca.conf, *.cer, *.pub, *.key files for sing/verify tests. +# They are never deleted except by `make distclean'. + diff --git a/tests/ima_hash.test b/tests/ima_hash.test new file mode 100755 index 0000000..d4bfe19 --- /dev/null +++ b/tests/ima_hash.test @@ -0,0 +1,72 @@ +#!/bin/bash +# +# evmctl ima_hash tests +# +# Copyright (C) 2019 Vitaly Chikunov <vt@altlinux.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +cd $(dirname $0) +PATH=../src:$PATH +source ./functions.sh +_require evmctl openssl + +# Check with constant +check_const() { + local alg=$1 pref=$2 hash=$3 file=$4 + + FOR=$alg DEL=$file \ + _evmctl_run ima_hash --hashalgo $alg --xattr-user $file || return + FOR=$alg \ + _test_ima_xattr $file $pref$hash || return + rm $file + return $OK +} + +check() { + local alg=$1 pref=$2 hash=$3 + local file=$alg-hash.txt + + rm -f $file + touch $file + cmd="openssl dgst ${ENGINE:+-engine $ENGINE} -$alg $file" + echo - $cmd + hash=$(set -o pipefail; eval "$cmd" 2>/dev/null | cut -d' ' -f2) + if [ $? -ne 0 ] && _is_positive_test; then + echo $CYAN"$alg test is skipped"$NORM + rm $file + return $SKIP + fi + check_const $alg $pref "$hash" $file +} + +# check args: algo prefix hex-hash +pos check md4 0x01 +pos check md5 0x01 +pos check sha1 0x01 +neg check SHA1 0x01 # uppercase +neg check sha512-224 0x01 # valid for pkcs1 +neg check sha512-256 0x01 # valid for pkcs1 +neg check unknown 0x01 # nonexistent +pos check sha224 0x0407 +pos check sha256 0x0404 +pos check sha384 0x0405 +pos check sha512 0x0406 +pos check rmd160 0x0403 +neg check sm3 0x01 +neg check sm3-256 0x01 +_enable_gost_engine +pos check md_gost12_256 0x0412 +pos check streebog256 0x0412 +pos check md_gost12_512 0x0413 +pos check streebog512 0x0413 + +_report_exit diff --git a/tests/ima_sign.test b/tests/ima_sign.test new file mode 100755 index 0000000..5af2bbb --- /dev/null +++ b/tests/ima_sign.test @@ -0,0 +1,211 @@ +#!/bin/bash +# +# evmctl ima_sign tests +# +# Copyright (C) 2019 Vitaly Chikunov <vt@altlinux.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +cd $(dirname $0) +PATH=../src:$PATH +source ./functions.sh +_require evmctl openssl xxd getfattr +./gen-keys.sh >/dev/null 2>&1 + +# Determine keyid from cert +keyid() { + local cer=$1.cer + + id=$(openssl x509 ${ENGINE:+-engine $ENGINE} \ + -in $cer -inform DER -pubkey -noout 2>/dev/null \ + | openssl asn1parse \ + | grep BIT.STRING \ + | cut -d: -f1) + if [ -z "$id" ]; then + echo "Cannot asn1parse $cer" >&2 + exit 1 + fi + openssl x509 ${ENGINE:+-engine $ENGINE} \ + -in $cer -inform DER -pubkey -noout 2>/dev/null \ + | openssl asn1parse -strparse $id -out - -noout \ + | openssl dgst -c -sha1 \ + | cut -d' ' -f2 \ + | grep -o ":..:..:..:..$" \ + | tr -d : +} + +# Check that detached signature matches xattr signature +_test_sigfile() { + local file=$1 file_sig=$2 file_sig2=$3 + + if [ ! -e $file_sig ]; then + red_if_pos + echo "evmctl ima_sign: no detached signature $file_sig" + norm_if_pos + rm $file + return $FAIL + fi + + _extract_ima_xattr $file $file_sig2 + #getfattr -n user.ima --only-values $file > $file_sig2 + if ! cmp -bl $file_sig $file_sig2; then + red_if_pos + echo "evmctl ima_sign: xattr signature on $file differ from detached $file_sig" + norm_if_pos + rm $file $file_sig $file_sig2 + return $FAIL + fi + + rm $file_sig $file_sig2 +} + +_ima_sign() { + local key=$1 alg=$2 file=$3 opts=$4 + + FOR="$alg ($key.key)" DEL=$file \ + _evmctl_run ima_sign $opts \ + --hashalgo $alg --key $key.key --xattr-user --sigfile $file || return + _test_sigfile $file $file.sig $file.sig2 +} + +# Test RSA signature v1 +# This is simpler test than v2 tests as we don't try to verify +# correctness of the signature here. +check_rsa1() { + local key=test-rsa1024 alg=$1 pref=$2 + local file=${alg}-v1.txt + + # Append suffix to files for negative tests, because we need + # to leave only good files for ima_verify.test + _is_negative_test && file+='~' + + rm -f $file + touch $file + _ima_sign $key $alg $file "--rsa" || return + FOR=$alg \ + _test_ima_xattr $file $pref || return + return $OK +} + +# Test RSA signature v2 +check_rsa2() { + local key=test-rsa1024 alg=$1 pref=$2 + local file=$alg.txt + + # Append suffix to files for negative tests, because we need + # to leave only good files for ima_verify.test + _is_negative_test && file+='~' + rm -f $file + + keyid=$(keyid $key) + if [ $? -ne 0 -o -z "$keyid" ]; then + echo "Unable to determine keyid for $key" + return $HARDFAIL + fi + pref=$(echo $pref | sed "s/K/$keyid/") + + # Calculate signature with openssl to compare later + if _is_positive_test && ! openssl dgst -$alg /dev/null >/dev/null 2>&1; then + echo $CYAN"$alg ($key.key) test is skipped (openssl cannot handle $alg digest)"$NORM + return $SKIP + fi + touch $file + cmd="openssl dgst -$alg -sign $key.key -hex $file" + echo - "$cmd" + sig=$(set -o pipefail; eval "$cmd" 2>/dev/null | cut -d' ' -f2) + if [ $? -ne 0 ] && _is_positive_test; then + echo $CYAN"$alg ($key.key) test is skipped (openssl cannot sign with $alg+$key.key)"$NORM + rm $file + return $SKIP + fi + + _ima_sign $key $alg $file || return + FOR=$alg \ + _test_ima_xattr $file $pref$sig || return + return $OK +} + +# Test EC-RDSA signature v2 +check_ecrdsa() { + local key=test-$1 alg=$2 pref=$3 + + # Sign different files not only depending on alg hash algo, + # but also on alg key. Append curve letter to the hash algo. + curve=${key##*-} + file=$alg${curve,,}.txt + + # Append suffix to files for negative tests, because we need + # to leave only good files for ima_verify.test + _is_negative_test && file+='~' + rm -f $file + + # Older openssl unable to parse 512-bit EC-RDSA keys + if ! openssl pkey ${ENGINE:+-engine $ENGINE} -in $key.key >/dev/null 2>&1; then + echo $CYAN"$alg ($key.key) test is skipped"$NORM + return $SKIP + fi + + keyid=$(keyid $key) + if [ $? -ne 0 ]; then + echo "Unable to determine keyid for $key" + return $HARDFAIL + fi + pref=$(echo $pref | sed "s/K/$keyid/") + + touch $file + _ima_sign $key $alg $file || return + FOR="$alg ($key)" \ + _test_ima_xattr $file $pref.* || return + + _extract_ima_xattr $file $file.sig2 $pref + + # Verify with openssl + cmd="openssl dgst ${ENGINE:+-engine $ENGINE} -$alg -verify $key.pub \ + -signature $file.sig2 $file" + echo - "$cmd" + if ! eval "$cmd"; then + red_if_pos + echo "Signature verification with openssl is failed." + norm_if_pos + rm $file.sig2 + return $FAIL + fi + + rm $file.sig2 + return $OK +} + +set -f # disable globbing + +# check args: algo prefix hex-signature-prefix (K in place of keyid.) +neg check_rsa1 md5 0x0301.* +pos check_rsa1 sha1 0x0301.{290} +pos check_rsa1 sha256 0x0301.{290} +pos check_rsa2 md5 0x030201K0080 +pos check_rsa2 sha1 0x030202K0080 +pos check_rsa2 sha224 0x030207K0080 +pos check_rsa2 sha256 0x030204K0080 +pos check_rsa2 sha384 0x030205K0080 +pos check_rsa2 sha512 0x030206K0080 +pos check_rsa2 rmd160 0x030203K0080 +neg check_rsa2 noalgo 0x0302 +_enable_gost_engine +pos check_ecrdsa gost2012_256-A md_gost12_256 0x030212K0040 +pos check_ecrdsa gost2012_256-B md_gost12_256 0x030212K0040 +pos check_ecrdsa gost2012_256-C md_gost12_256 0x030212K0040 +pos check_ecrdsa gost2012_512-A md_gost12_512 0x030213K0080 +pos check_ecrdsa gost2012_512-B md_gost12_512 0x030213K0080 +neg check_ecrdsa gost2012_256-A md_gost12_512 0x030212K0040 +neg check_ecrdsa gost2012_512-A md_gost12_256 0x030212K0040 + +# This test leaves signed *.txt files for ima_verify.test. +# they are never deleted except by `make clean'. +_report_exit diff --git a/tests/ima_verify.test b/tests/ima_verify.test new file mode 100755 index 0000000..c85331d --- /dev/null +++ b/tests/ima_verify.test @@ -0,0 +1,93 @@ +#!/bin/bash +# +# evmctl ima_verify tests +# +# Copyright (C) 2019 Vitaly Chikunov <vt@altlinux.org> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +cd $(dirname $0) +PATH=../src:$PATH +source ./functions.sh +_require evmctl openssl + +# Note: This test uses *.txt files signed by ima_sign.test as input. + +# Check with constant +check() { + local key=$1 alg=$2 files=${@:3} + + if ! openssl dgst ${ENGINE:+-engine $ENGINE} -$alg /dev/null >/dev/null 2>&1; then + echo $CYAN"$alg ($key.key) test is skipped (openssl does not support $alg)"$NORM + return $SKIP + fi + + FOR="$files ($key)" \ + _evmctl_run ima_verify --key $key --xattr-user $files +} + +# Tests (check args: key hash-algo signed-file) +for alg in sha1 sha256; do + file=$alg-v1.txt + + pos check test-rsa1024.pub $alg $file + neg check test-rsa2048.pub $alg $file + neg check /dev/null $alg $file + neg check /dev/zero $alg $file +done + +for alg in md5 sha1 sha224 sha256 sha384 sha512 rmd160; do + file=$alg.txt + + if [ ! -e $file ]; then + echo $CYAN"Signed file $file is not found. Skipping verify $alg test."$NORM + testsskip+=1 + continue + fi + pos check test-rsa1024.cer $alg $file + neg check test-rsa1024.cer $alg /dev/null /proc/absent $file + neg check test-rsa1024.cer $alg $file /dev/null /proc/absent + pos check test-rsa1024.cer $alg $file $prev + pos check test-rsa1024.cer $alg $prev $file + pos check /dev/zero,test-rsa1024.cer $alg $file + pos check /dev/null,test-rsa1024.cer $alg $file + pos check test-rsa1024.cer,test-rsa2048.cer $alg $file + pos check test-rsa2048.cer,test-rsa1024.cer $alg $file + pos check ,,test-rsa1024.cer $alg $file + neg check test-rsa2048.cer $alg $file + neg check /dev/absent $alg $file + neg check /dev/null $alg $file + neg check /dev/zero $alg $file + prev=$file +done + +_enable_gost_engine +wk=test-gost2012_512-B.cer # wrong key (other than first) +for key in gost2012_256-A gost2012_256-B gost2012_256-C \ + gost2012_512-A gost2012_512-B; do + tmp=${key#gost2012_} + bits=${tmp%-?} # correct bit length + wbits=$(( $bits == 256 ? 512 : 256 )) # wrong bit length + curve=${key#*-} # curve letter + alg=md_gost12_$bits # proper hash algo + file=$alg${curve,,}.txt # file signed in ima_sign test + key=test-$key.cer # correct key in a cert + wwk=test-gost2012_$wbits-$curve.cer # key with wrong bit length + + pos check $key $alg $file + pos check $wk,$key $alg $file + pos check $key,$wk $alg $file + neg check $wk $alg $file + neg check $wwk $alg $file + wk=$key # previous key is always wrong +done + +_report_exit
Run `make check' to execute the tests. Currently only ima_hash, ima_sign, and ima_verify are tested. Signed-off-by: Vitaly Chikunov <vt@altlinux.org> --- Changelog since v1: - Apply suggestions by Petr Vorel: - Rename function names and variables to be more understandable. - Rename tests/functions to tests/functions.sh. - Define exit codes (77, 99, ...) as variables. - Added more comments and remove single letter variables (for Mimi Zohar). - Move getfattr check into function. - Move evmctl run and check into single function. - Add sign/verify tests for v1 signatures. - Minor improvements. - Since I still edit all 5 files I did not split the patch into multiple commits to separate the files, otherwise editing will become too complicated, as I ought to continuously rebase and edit different commits. This was really non-productive suggestion. Please test the tests. Makefile.am | 2 +- configure.ac | 1 + tests/Makefile.am | 15 ++++ tests/functions.sh | 218 ++++++++++++++++++++++++++++++++++++++++++++++++++ tests/gen-keys.sh | 90 +++++++++++++++++++++ tests/ima_hash.test | 72 +++++++++++++++++ tests/ima_sign.test | 211 ++++++++++++++++++++++++++++++++++++++++++++++++ tests/ima_verify.test | 93 +++++++++++++++++++++ 8 files changed, 701 insertions(+), 1 deletion(-) create mode 100644 tests/Makefile.am create mode 100755 tests/functions.sh create mode 100755 tests/gen-keys.sh create mode 100755 tests/ima_hash.test create mode 100755 tests/ima_sign.test create mode 100755 tests/ima_verify.test