Message ID | 20190729183941.18164-2-ccaione@baylibre.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Rework secure-monitor driver | expand |
On Mon 29 Jul 2019 at 19:39, Carlo Caione <ccaione@baylibre.com> wrote: > No functional changes, just a cleanup commit to tidy up a bit. Move the > nvmem_* and clk structures in a container struct. > > Signed-off-by: Carlo Caione <ccaione@baylibre.com> > --- > drivers/nvmem/meson-efuse.c | 47 ++++++++++++++++++++----------------- > 1 file changed, 26 insertions(+), 21 deletions(-) > > diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c > index 39bd76306033..9924b98db772 100644 > --- a/drivers/nvmem/meson-efuse.c > +++ b/drivers/nvmem/meson-efuse.c > @@ -14,6 +14,12 @@ > > #include <linux/firmware/meson/meson_sm.h> > > +struct meson_efuse { > + struct nvmem_device *nvmem; > + struct nvmem_config config; > + struct clk *clk; since this driver uses devm_add_action_or_reset, I don't think you need to keep the clk pointer around, unless you plan to do something with it later on ? It is kind of the same the other structure members, do we need to keep them around ? We could just let devm deal with it ? If you have a plan, could you share it ? > +}; > + > static int meson_efuse_read(void *context, unsigned int offset, > void *val, size_t bytes) > { > @@ -37,21 +43,23 @@ MODULE_DEVICE_TABLE(of, meson_efuse_match); > static int meson_efuse_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > - struct nvmem_device *nvmem; > - struct nvmem_config *econfig; > - struct clk *clk; > + struct meson_efuse *efuse; > unsigned int size; > int ret; > > - clk = devm_clk_get(dev, NULL); > - if (IS_ERR(clk)) { > - ret = PTR_ERR(clk); > + efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL); > + if (!efuse) > + return -ENOMEM; > + > + efuse->clk = devm_clk_get(dev, NULL); > + if (IS_ERR(efuse->clk)) { > + ret = PTR_ERR(efuse->clk); > if (ret != -EPROBE_DEFER) > dev_err(dev, "failed to get efuse gate"); > return ret; > } > > - ret = clk_prepare_enable(clk); > + ret = clk_prepare_enable(efuse->clk); > if (ret) { > dev_err(dev, "failed to enable gate"); > return ret; > @@ -59,7 +67,7 @@ static int meson_efuse_probe(struct platform_device *pdev) > > ret = devm_add_action_or_reset(dev, > (void(*)(void *))clk_disable_unprepare, > - clk); > + efuse->clk); > if (ret) { > dev_err(dev, "failed to add disable callback"); > return ret; > @@ -70,21 +78,18 @@ static int meson_efuse_probe(struct platform_device *pdev) > return -EINVAL; > } > > - econfig = devm_kzalloc(dev, sizeof(*econfig), GFP_KERNEL); > - if (!econfig) > - return -ENOMEM; > - > - econfig->dev = dev; > - econfig->name = dev_name(dev); > - econfig->stride = 1; > - econfig->word_size = 1; > - econfig->reg_read = meson_efuse_read; > - econfig->reg_write = meson_efuse_write; > - econfig->size = size; > + efuse->config.dev = dev; > + efuse->config.name = dev_name(dev); > + efuse->config.stride = 1; > + efuse->config.word_size = 1; > + efuse->config.reg_read = meson_efuse_read; > + efuse->config.reg_write = meson_efuse_write; > + efuse->config.size = size; > + efuse->config.priv = efuse; > > - nvmem = devm_nvmem_register(&pdev->dev, econfig); > + efuse->nvmem = devm_nvmem_register(&pdev->dev, &efuse->config); > > - return PTR_ERR_OR_ZERO(nvmem); > + return PTR_ERR_OR_ZERO(efuse->nvmem); > } > > static struct platform_driver meson_efuse_driver = { > -- > 2.20.1
On 30/07/2019 10:04, Jerome Brunet wrote: > On Mon 29 Jul 2019 at 19:39, Carlo Caione <ccaione@baylibre.com> wrote: /cut >> +struct meson_efuse { >> + struct nvmem_device *nvmem; >> + struct nvmem_config config; >> + struct clk *clk; > > since this driver uses devm_add_action_or_reset, I don't think you need > to keep the clk pointer around, unless you plan to do something with it > later on ? Good point about the clk pointer. > It is kind of the same the other structure members, do we need to keep > them around ? We could just let devm deal with it ? > > If you have a plan, could you share it ? No plan. In the PATCH 4/5 I was going to add struct meson_sm_firmware to the bundle and to me it's a bit more elegant to have all the auxiliary structs together in a single container. For the sake of keeping the diff size low I'm going to rework this in V2. -- Carlo Caione
diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c index 39bd76306033..9924b98db772 100644 --- a/drivers/nvmem/meson-efuse.c +++ b/drivers/nvmem/meson-efuse.c @@ -14,6 +14,12 @@ #include <linux/firmware/meson/meson_sm.h> +struct meson_efuse { + struct nvmem_device *nvmem; + struct nvmem_config config; + struct clk *clk; +}; + static int meson_efuse_read(void *context, unsigned int offset, void *val, size_t bytes) { @@ -37,21 +43,23 @@ MODULE_DEVICE_TABLE(of, meson_efuse_match); static int meson_efuse_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; - struct nvmem_device *nvmem; - struct nvmem_config *econfig; - struct clk *clk; + struct meson_efuse *efuse; unsigned int size; int ret; - clk = devm_clk_get(dev, NULL); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); + efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL); + if (!efuse) + return -ENOMEM; + + efuse->clk = devm_clk_get(dev, NULL); + if (IS_ERR(efuse->clk)) { + ret = PTR_ERR(efuse->clk); if (ret != -EPROBE_DEFER) dev_err(dev, "failed to get efuse gate"); return ret; } - ret = clk_prepare_enable(clk); + ret = clk_prepare_enable(efuse->clk); if (ret) { dev_err(dev, "failed to enable gate"); return ret; @@ -59,7 +67,7 @@ static int meson_efuse_probe(struct platform_device *pdev) ret = devm_add_action_or_reset(dev, (void(*)(void *))clk_disable_unprepare, - clk); + efuse->clk); if (ret) { dev_err(dev, "failed to add disable callback"); return ret; @@ -70,21 +78,18 @@ static int meson_efuse_probe(struct platform_device *pdev) return -EINVAL; } - econfig = devm_kzalloc(dev, sizeof(*econfig), GFP_KERNEL); - if (!econfig) - return -ENOMEM; - - econfig->dev = dev; - econfig->name = dev_name(dev); - econfig->stride = 1; - econfig->word_size = 1; - econfig->reg_read = meson_efuse_read; - econfig->reg_write = meson_efuse_write; - econfig->size = size; + efuse->config.dev = dev; + efuse->config.name = dev_name(dev); + efuse->config.stride = 1; + efuse->config.word_size = 1; + efuse->config.reg_read = meson_efuse_read; + efuse->config.reg_write = meson_efuse_write; + efuse->config.size = size; + efuse->config.priv = efuse; - nvmem = devm_nvmem_register(&pdev->dev, econfig); + efuse->nvmem = devm_nvmem_register(&pdev->dev, &efuse->config); - return PTR_ERR_OR_ZERO(nvmem); + return PTR_ERR_OR_ZERO(efuse->nvmem); } static struct platform_driver meson_efuse_driver = {
No functional changes, just a cleanup commit to tidy up a bit. Move the nvmem_* and clk structures in a container struct. Signed-off-by: Carlo Caione <ccaione@baylibre.com> --- drivers/nvmem/meson-efuse.c | 47 ++++++++++++++++++++----------------- 1 file changed, 26 insertions(+), 21 deletions(-)