@@ -530,6 +530,7 @@ enum ieee80211_tid_conf_mask {
IEEE80211_TID_CONF_RETRY = BIT(1),
IEEE80211_TID_CONF_AMPDU = BIT(2),
IEEE80211_TID_CONF_RTSCTS = BIT(3),
+ IEEE80211_TID_CONF_TX_BITRATE = BIT(4),
};
/**
@@ -542,6 +543,8 @@ enum ieee80211_tid_conf_mask {
* @retry_short: retry count value
* @ampdu: Enable/Disable aggregation
* @rtscts: Enable/Disable RTS/CTS
+ * @txrate_type: TX bitrate mask type
+ * @mask: bitrate to be applied for the TID
*/
struct ieee80211_tid_cfg {
u8 tid;
@@ -551,6 +554,8 @@ struct ieee80211_tid_cfg {
int retry_short;
u8 ampdu;
u8 rtscts;
+ enum nl80211_tx_rate_setting txrate_type;
+ struct cfg80211_bitrate_mask *mask;
};
/**
@@ -4649,6 +4649,18 @@ enum nl80211_tx_power_setting {
};
/**
+ * enum nl80211_tx_rate_setting - TX rate configuration type
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
+ */
+enum nl80211_tx_rate_setting {
+ NL80211_TX_RATE_AUTOMATIC,
+ NL80211_TX_RATE_LIMITED,
+ NL80211_TX_RATE_FIXED,
+};
+
+/**
* enum nl80211_tid_config - TID config state
* @NL80211_TID_CONFIG_DEFAULT: Default config for the TID
* @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
@@ -4742,6 +4754,25 @@ enum nl80211_tid_config {
* NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL and supporting per station
* RTS_CTS configuration should advertise
* NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL.
+ * @NL80211_TID_ATTR_CONFIG_TX_RATES: Data frame TX rate mask should be applied
+ * with the parameters passed through %NL80211_ATTR_TX_RATES. This
+ * configuration is per TID, TID is specified with
+ * %NL80211_TID_ATTR_CONFIG_TID.
+ * If the peer MAC address is passed in %NL80211_ATTR_MAC, then this
+ * configuration is applied to the data frame for the tid to that connected
+ * station. This attribute will be useful to notfiy the driver that what
+ * type of txrate should be applied(%enum enum nl80211_tx_rate_setting)
+ * for the connected station (%NL80211_ATTR_MAC),
+ * Station specific retry configuration is valid only for STA's
+ * current connection. i.e. the configuration will be reset to default when
+ * the station connects back after disconnection/roaming.
+ * when user-space does not include %NL80211_ATTR_MAC, this configuration
+ * should be treated as per-netdev configuration. This configuration will
+ * be cleared when the interface goes down and on the disconnection from a
+ * BSS. Driver supporting this feature should advertise
+ * NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per station
+ * TX bitrate configuration should advertise
+ * NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK.
*/
enum nl80211_tid_attr_config {
__NL80211_TID_ATTR_INVALID,
@@ -4752,6 +4783,8 @@ enum nl80211_tid_attr_config {
NL80211_TID_ATTR_CONFIG_RETRY_LONG,
NL80211_TID_ATTR_CONFIG_AMPDU_CTRL,
NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL,
+ NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE,
+ NL80211_TID_ATTR_CONFIG_TX_RATES,
/* keep last */
__NL80211_TID_ATTR_CONFIG_AFTER_LAST,
@@ -5585,6 +5618,10 @@ enum nl80211_feature_flags {
* RTS_CTS control(enable/disable).
* @NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL: Driver supports STA specific
* RTS_CTS control(enable/disable).
+ * @NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK: Driver supports TID specific
+ * TX bitrate configuration.
+ * @NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK: Driver supports STA specific
+ * TX bitrate configuration.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5639,6 +5676,8 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_PER_STA_AMPDU_CTRL,
NL80211_EXT_FEATURE_PER_TID_RTSCTS_CTRL,
NL80211_EXT_FEATURE_PER_STA_RTSCTS_CTRL,
+ NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK,
+ NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -281,6 +281,15 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_NESTED_ARRAY(nl80211_psmr_peer_attr_policy),
};
+static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
+ [NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
+ .len = NL80211_MAX_SUPP_RATES },
+ [NL80211_TXRATE_HT] = { .type = NLA_BINARY,
+ .len = NL80211_MAX_SUPP_HT_RATES },
+ [NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
+ [NL80211_TXRATE_GI] = { .type = NLA_U8 },
+};
+
static const struct nla_policy
nl80211_tid_attr_config_policy[NL80211_TID_ATTR_CONFIG_MAX + 1] = {
[NL80211_TID_ATTR_CONFIG_TID] = { .type = NLA_U8 },
@@ -293,6 +302,10 @@ static int validate_ie_attr(const struct nlattr *attr,
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL] =
NLA_POLICY_MAX(NLA_U8, NL80211_TID_CONFIG_DISABLE),
+ [NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE] =
+ NLA_POLICY_MAX(NLA_U8, NL80211_TX_RATE_FIXED),
+ [NL80211_TID_ATTR_CONFIG_TX_RATES] =
+ NLA_POLICY_NESTED(nl80211_txattr_policy),
};
const struct nla_policy nl80211_policy[NUM_NL80211_ATTR] = {
@@ -4147,14 +4160,14 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
}
/* if no rates are given set it back to the defaults */
- if (!info->attrs[NL80211_ATTR_TX_RATES])
+ if (!attrs[attr])
goto out;
/* The nested attribute uses enum nl80211_band as the index. This maps
* directly to the enum nl80211_band values used in cfg80211.
*/
BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
- nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) {
+ nla_for_each_nested(tx_rates, attrs[attr], rem) {
enum nl80211_band band = nla_type(tx_rates);
int err;
@@ -4602,7 +4615,9 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
return -EINVAL;
if (info->attrs[NL80211_ATTR_TX_RATES]) {
- err = nl80211_parse_tx_bitrate_mask(info, ¶ms.beacon_rate);
+ err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+ NL80211_ATTR_TX_RATES,
+ ¶ms.beacon_rate);
if (err)
return err;
@@ -10309,7 +10324,8 @@ static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
if (!rdev->ops->set_bitrate_mask)
return -EOPNOTSUPP;
- err = nl80211_parse_tx_bitrate_mask(info, &mask);
+ err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+ NL80211_ATTR_TX_RATES, &mask);
if (err)
return err;
@@ -10902,7 +10918,9 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
}
if (info->attrs[NL80211_ATTR_TX_RATES]) {
- err = nl80211_parse_tx_bitrate_mask(info, &setup.beacon_rate);
+ err = nl80211_parse_tx_bitrate_mask(info, info->attrs,
+ NL80211_ATTR_TX_RATES,
+ &setup.beacon_rate);
if (err)
return err;
@@ -13598,6 +13616,7 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
struct genl_info *info, const u8 *peer)
{
struct netlink_ext_ack *extack = info->extack;
+ int ret;
tid_conf->tid = nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_TID]);
if (attrs[NL80211_TID_ATTR_CONFIG_NOACK]) {
@@ -13713,6 +13732,52 @@ static int parse_tid_conf(struct cfg80211_registered_device *rdev,
nla_get_u8(attrs[NL80211_TID_ATTR_CONFIG_RTSCTS_CTRL]);
}
+ if (attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE]) {
+ int idx;
+ enum nl80211_attrs attr;
+
+ if (!wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE],
+ "TID specific configuration not "
+ "supported");
+ return -EOPNOTSUPP;
+ }
+
+ if (peer &&
+ !wiphy_ext_feature_isset(&rdev->wiphy,
+ NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK)) {
+ NL_SET_ERR_MSG_ATTR(extack,
+ attrs[NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE],
+ "peer specfic TID configuration not "
+ "supported");
+ return -EOPNOTSUPP;
+ }
+
+ idx = NL80211_TID_ATTR_CONFIG_TX_RATES_TYPE;
+ tid_conf->txrate_type = nla_get_u8(attrs[idx]);
+
+ tid_conf->tid_conf_mask |= IEEE80211_TID_CONF_TX_BITRATE;
+ if (tid_conf->txrate_type != NL80211_TX_RATE_AUTOMATIC) {
+ tid_conf->mask =
+ kzalloc(sizeof(struct cfg80211_bitrate_mask),
+ GFP_KERNEL);
+ if (!tid_conf->mask)
+ return -ENOMEM;
+
+ attr = NL80211_TID_ATTR_CONFIG_TX_RATES;
+ ret = nl80211_parse_tx_bitrate_mask(info, attrs, attr,
+ tid_conf->mask);
+ if (ret) {
+ kfree(tid_conf->mask);
+ return ret;
+ }
+ } else {
+ tid_conf->mask = NULL;
+ }
+ }
+
return 0;
}
@@ -13763,7 +13828,7 @@ static int nl80211_set_tid_config(struct sk_buff *skb,
ret = parse_tid_conf(rdev, attrs,
&tid_config->tid_conf[conf_idx],
- tid_config->peer);
+ info, tid_config->peer);
if (ret)
goto bad_tid_conf;
Introduce NL80211_TID_ATTR_CONFIG_TX_RATES in nl80211_tid_attr_config to accept data TID specific TX bitrate configuration through NL80211_CMD_SET_TID_CONFIG command. TID for which the this configuration is to be applied is passed in NL80211_TID_ATTR_CONFIG_TID attribute. TX bitrate mask values passed in NL80211_ATTR_TX_RATES attribute and NL80211_TID_ATTR_CONFIG_TX_RATES attribute will have types of the TX rate should be applied. When the user-space wants this configuration peer specific rather than being applied for all the connected stations, MAC address of the peer can be passed in NL80211_ATTR_MAC attribute. Driver supporting this feature should advertise NL80211_EXT_FEATURE_PER_TID_TX_BITRATE_MASK and supporting per-STA data TID TX bitrate configuration should advertise NL80211_EXT_FEATURE_PER_STA_TX_BITRATE_MASK. Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org> --- include/net/cfg80211.h | 5 +++ include/uapi/linux/nl80211.h | 39 +++++++++++++++++++++ net/wireless/nl80211.c | 77 ++++++++++++++++++++++++++++++++++++++---- 3 files changed, 115 insertions(+), 6 deletions(-)