diff mbox series

[PATCH/RFC,04/12] dt-bindings: display: Add bindings for Advantech IDK-2121WR

Message ID 1564731249-22671-5-git-send-email-fabrizio.castro@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Kieran Bingham
Headers show
Series Add dual-LVDS panel support to EK874 | expand

Commit Message

Fabrizio Castro Aug. 2, 2019, 7:34 a.m. UTC 
This panel is handled through the generic lvds-panel bindings,
so only needs its additional compatible specified.

Some panel specific documentation can be found here:
https://buy.advantech.eu/Displays/Embedded-LCD-Kits-High-Brightness/model-IDK-2121WR-K2FHA2E.htm

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
---
 .../display/panel/advantech,idk-2121wr.txt         | 62 ++++++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt

Comments

Laurent Pinchart Aug. 2, 2019, 8:03 a.m. UTC | #1 
Hi Fabrizio,

Thank you for the patch.

On Fri, Aug 02, 2019 at 08:34:01AM +0100, Fabrizio Castro wrote:
> This panel is handled through the generic lvds-panel bindings,
> so only needs its additional compatible specified.
> 
> Some panel specific documentation can be found here:

s/panel specific/panel-specific/

> https://buy.advantech.eu/Displays/Embedded-LCD-Kits-High-Brightness/model-IDK-2121WR-K2FHA2E.htm
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> ---
>  .../display/panel/advantech,idk-2121wr.txt         | 62 ++++++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> new file mode 100644
> index 0000000..70b15b6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> @@ -0,0 +1,62 @@
> +Advantech Co., Ltd. IDK-2121WR 21.5" LVDS panel
> +===============================================
> +
> +Required properties:
> +- compatible: should be "advantech,idk-2121wr" followed by "panel-lvds"
> +
> +This binding is compatible with the lvds-panel binding, which is specified
> +in panel-lvds.txt in this directory.

How about adding "The panel operates in dual-link mode and thus requires
two port nodes." ?

> +
> +Example
> +-------
> +
> +	panel {
> +		compatible = "advantech,idk-2121wr", "panel-lvds";
> +
> +		width-mm = <476>;
> +		height-mm = <268>;
> +
> +		data-mapping = "vesa-24";
> +
> +		panel-timing {
> +			clock-frequency = <148500000>;
> +			hactive = <1920>;
> +			vactive = <1080>;
> +			hsync-len = <44>;
> +			hfront-porch = <88>;
> +			hback-porch = <148>;
> +			vfront-porch = <4>;
> +			vback-porch = <36>;
> +			vsync-len = <5>;
> +		};
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				lvds0_panel_in: endpoint {
> +					remote-endpoint = <&lvds0_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				lvds1_panel_in: endpoint {
> +					remote-endpoint = <&lvds1_out>;
> +				};
> +			};
> +		};
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm5 0 50000>;
> +
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <6>;
> +
> +		power-supply = <&reg_12p0v>;
> +		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
> +	};

I think you can drop the backlight here, it's a bit out of scope.
Fabrizio Castro Aug. 5, 2019, 9:04 a.m. UTC | #2 
Hi Laurent,

Thank you for your feedback!

> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Sent: 02 August 2019 09:04
> Subject: Re: [PATCH/RFC 04/12] dt-bindings: display: Add bindings for Advantech IDK-2121WR
> 
> Hi Fabrizio,
> 
> Thank you for the patch.
> 
> On Fri, Aug 02, 2019 at 08:34:01AM +0100, Fabrizio Castro wrote:
> > This panel is handled through the generic lvds-panel bindings,
> > so only needs its additional compatible specified.
> >
> > Some panel specific documentation can be found here:
> 
> s/panel specific/panel-specific/

Will change

> 
> > https://buy.advantech.eu/Displays/Embedded-LCD-Kits-High-Brightness/model-IDK-2121WR-K2FHA2E.htm
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> > ---
> >  .../display/panel/advantech,idk-2121wr.txt         | 62 ++++++++++++++++++++++
> >  1 file changed, 62 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> >
> > diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> > new file mode 100644
> > index 0000000..70b15b6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
> > @@ -0,0 +1,62 @@
> > +Advantech Co., Ltd. IDK-2121WR 21.5" LVDS panel
> > +===============================================
> > +
> > +Required properties:
> > +- compatible: should be "advantech,idk-2121wr" followed by "panel-lvds"
> > +
> > +This binding is compatible with the lvds-panel binding, which is specified
> > +in panel-lvds.txt in this directory.
> 
> How about adding "The panel operates in dual-link mode and thus requires
> two port nodes." ?

You are right, will add.

> 
> > +
> > +Example
> > +-------
> > +
> > +	panel {
> > +		compatible = "advantech,idk-2121wr", "panel-lvds";
> > +
> > +		width-mm = <476>;
> > +		height-mm = <268>;
> > +
> > +		data-mapping = "vesa-24";
> > +
> > +		panel-timing {
> > +			clock-frequency = <148500000>;
> > +			hactive = <1920>;
> > +			vactive = <1080>;
> > +			hsync-len = <44>;
> > +			hfront-porch = <88>;
> > +			hback-porch = <148>;
> > +			vfront-porch = <4>;
> > +			vback-porch = <36>;
> > +			vsync-len = <5>;
> > +		};
> > +
> > +		ports {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +
> > +			port@0 {
> > +				reg = <0>;
> > +				lvds0_panel_in: endpoint {
> > +					remote-endpoint = <&lvds0_out>;
> > +				};
> > +			};
> > +
> > +			port@1 {
> > +				reg = <1>;
> > +				lvds1_panel_in: endpoint {
> > +					remote-endpoint = <&lvds1_out>;
> > +				};
> > +			};
> > +		};
> > +	};
> > +
> > +	backlight: backlight {
> > +		compatible = "pwm-backlight";
> > +		pwms = <&pwm5 0 50000>;
> > +
> > +		brightness-levels = <0 4 8 16 32 64 128 255>;
> > +		default-brightness-level = <6>;
> > +
> > +		power-supply = <&reg_12p0v>;
> > +		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
> > +	};
> 
> I think you can drop the backlight here, it's a bit out of scope.

Agreed.

Thanks,
Fab

> 
> --
> Regards,
> 
> Laurent Pinchart
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
new file mode 100644
index 0000000..70b15b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.txt
@@ -0,0 +1,62 @@ 
+Advantech Co., Ltd. IDK-2121WR 21.5" LVDS panel
+===============================================
+
+Required properties:
+- compatible: should be "advantech,idk-2121wr" followed by "panel-lvds"
+
+This binding is compatible with the lvds-panel binding, which is specified
+in panel-lvds.txt in this directory.
+
+Example
+-------
+
+	panel {
+		compatible = "advantech,idk-2121wr", "panel-lvds";
+
+		width-mm = <476>;
+		height-mm = <268>;
+
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hsync-len = <44>;
+			hfront-porch = <88>;
+			hback-porch = <148>;
+			vfront-porch = <4>;
+			vback-porch = <36>;
+			vsync-len = <5>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				lvds0_panel_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				lvds1_panel_in: endpoint {
+					remote-endpoint = <&lvds1_out>;
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm5 0 50000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		power-supply = <&reg_12p0v>;
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+	};