diff mbox series

[v2,3/6] arm64: dts: amlogic: g12: add temperature sensor

Message ID 20190731153529.30159-4-glaroque@baylibre.com (mailing list archive)
State Superseded
Headers show
Series Add support of New Amlogic temperature sensor for G12 SoCs | expand

Commit Message

Guillaume LA ROQUE July 31, 2019, 3:35 p.m. UTC 
Add cpu and ddr temperature sensors for G12 Socs

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
---
 .../boot/dts/amlogic/meson-g12-common.dtsi    | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

Comments

Martin Blumenstingl Aug. 3, 2019, 5:52 p.m. UTC | #1 
Hi Guillaume,

On Wed, Jul 31, 2019 at 5:36 PM Guillaume La Roque
<glaroque@baylibre.com> wrote:
>
> Add cpu and ddr temperature sensors for G12 Socs
>
> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
with the nit-pick below addressed:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

> ---
>  .../boot/dts/amlogic/meson-g12-common.dtsi    | 22 +++++++++++++++++++
>  1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> index 06e186ca41e3..7f862a3490fb 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> @@ -1353,6 +1353,28 @@
>                                 };
>                         };
>
> +                       cpu_temp: temperature-sensor@34800 {
> +                               compatible = "amlogic,g12-cpu-thermal",
> +                                            "amlogic,g12-thermal";
> +                               reg = <0x0 0x34800 0x0 0x50>;
> +                               interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
> +                               clocks = <&clkc CLKID_TS>;
> +                               status = "okay";
I believe nodes are enabled automatically if they don't have a status property

> +                               #thermal-sensor-cells = <0>;
> +                               amlogic,ao-secure = <&sec_AO>;
> +                       };
> +
> +                       ddr_temp: temperature-sensor@34c00 {
> +                               compatible = "amlogic,g12-ddr-thermal",
> +                                            "amlogic,g12-thermal";
> +                               reg = <0x0 0x34c00 0x0 0x50>;
> +                               interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
> +                               clocks = <&clkc CLKID_TS>;
> +                               status = "okay";
same here


Martin
Guillaume LA ROQUE Aug. 5, 2019, 9:41 a.m. UTC | #2 
hi Martin,


thanks for comments i will fix in v3.


guillaume

On 8/3/19 7:52 PM, Martin Blumenstingl wrote:
> Hi Guillaume,
>
> On Wed, Jul 31, 2019 at 5:36 PM Guillaume La Roque
> <glaroque@baylibre.com> wrote:
>> Add cpu and ddr temperature sensors for G12 Socs
>>
>> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
> with the nit-pick below addressed:
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
>
>> ---
>>  .../boot/dts/amlogic/meson-g12-common.dtsi    | 22 +++++++++++++++++++
>>  1 file changed, 22 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> index 06e186ca41e3..7f862a3490fb 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
>> @@ -1353,6 +1353,28 @@
>>                                 };
>>                         };
>>
>> +                       cpu_temp: temperature-sensor@34800 {
>> +                               compatible = "amlogic,g12-cpu-thermal",
>> +                                            "amlogic,g12-thermal";
>> +                               reg = <0x0 0x34800 0x0 0x50>;
>> +                               interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
>> +                               clocks = <&clkc CLKID_TS>;
>> +                               status = "okay";
> I believe nodes are enabled automatically if they don't have a status property
>
>> +                               #thermal-sensor-cells = <0>;
>> +                               amlogic,ao-secure = <&sec_AO>;
>> +                       };
>> +
>> +                       ddr_temp: temperature-sensor@34c00 {
>> +                               compatible = "amlogic,g12-ddr-thermal",
>> +                                            "amlogic,g12-thermal";
>> +                               reg = <0x0 0x34c00 0x0 0x50>;
>> +                               interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
>> +                               clocks = <&clkc CLKID_TS>;
>> +                               status = "okay";
> same here
>
>
> Martin
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 06e186ca41e3..7f862a3490fb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1353,6 +1353,28 @@ 
 				};
 			};
 
+			cpu_temp: temperature-sensor@34800 {
+				compatible = "amlogic,g12-cpu-thermal",
+					     "amlogic,g12-thermal";
+				reg = <0x0 0x34800 0x0 0x50>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				status = "okay";
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
+			ddr_temp: temperature-sensor@34c00 {
+				compatible = "amlogic,g12-ddr-thermal",
+					     "amlogic,g12-thermal";
+				reg = <0x0 0x34c00 0x0 0x50>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_TS>;
+				status = "okay";
+				#thermal-sensor-cells = <0>;
+				amlogic,ao-secure = <&sec_AO>;
+			};
+
 			usb2_phy0: phy@36000 {
 				compatible = "amlogic,g12a-usb2-phy";
 				reg = <0x0 0x36000 0x0 0x2000>;