| Message ID | 20190727194647.15355-2-martin.blumenstingl@googlemail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: meson8b: persistent MAC address for Odroid-C1 | expand |
Hi Martin, On 27/07/2019 21:46, Martin Blumenstingl wrote: > Amlogic's BSP kernel defines that all boards with a MAC address stored > in the eFuse have it at offset 0x1b4. It is up to the board to > decide whether to use this MAC address or not: > - Odroid-C1 uses the MAC address from the eFuse > - EC-100 seems to read the MAC address from eMMC > > Add the nvmem cell which describes the Ethernet MAC address. Don't > assign it to the Ethernet controller, because depending on the board the > actual MAC address may be read from somewhere else. > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > --- > arch/arm/boot/dts/meson8b.dtsi | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi > index 30fca9bb4bbe..c7de58b71d08 100644 > --- a/arch/arm/boot/dts/meson8b.dtsi > +++ b/arch/arm/boot/dts/meson8b.dtsi > @@ -402,6 +402,10 @@ > clocks = <&clkc CLKID_EFUSE>; > clock-names = "core"; > > + ethernet_mac_address: mac@1b4 { > + reg = <0x1b4 0x6>; > + }; Is this a fixed position for all boards ? if not, I'll suggest moving it to the odroid-c1 dt until you have more users. Neil > + > temperature_calib: calib@1f4 { > /* only the upper two bytes are relevant */ > reg = <0x1f4 0x4>; >
On Mon, Jul 29, 2019 at 9:11 AM Neil Armstrong <narmstrong@baylibre.com> wrote: > > Hi Martin, > > On 27/07/2019 21:46, Martin Blumenstingl wrote: > > Amlogic's BSP kernel defines that all boards with a MAC address stored > > in the eFuse have it at offset 0x1b4. It is up to the board to > > decide whether to use this MAC address or not: > > - Odroid-C1 uses the MAC address from the eFuse > > - EC-100 seems to read the MAC address from eMMC > > > > Add the nvmem cell which describes the Ethernet MAC address. Don't > > assign it to the Ethernet controller, because depending on the board the > > actual MAC address may be read from somewhere else. > > > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > > --- > > arch/arm/boot/dts/meson8b.dtsi | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi > > index 30fca9bb4bbe..c7de58b71d08 100644 > > --- a/arch/arm/boot/dts/meson8b.dtsi > > +++ b/arch/arm/boot/dts/meson8b.dtsi > > @@ -402,6 +402,10 @@ > > clocks = <&clkc CLKID_EFUSE>; > > clock-names = "core"; > > > > + ethernet_mac_address: mac@1b4 { > > + reg = <0x1b4 0x6>; > > + }; > > Is this a fixed position for all boards ? if not, I'll suggest moving > it to the odroid-c1 dt until you have more users. the 0x1b4 offset is hardcoded in Amlogic's kernel sources if some board uses another offset then the manufacturer had to patch the kernel to make it work (like Endless did) +Cc hexdump0815 - can you please run the following command on your Meson8b MXQ board: $ hexdump -C /sys/bus/nvmem/devices/meson8b-efuse0/nvmem | grep 000001b0 | cut -d' ' -f7,8,9,10,12,13 this should print the MAC address that is also used by the stock firmware and/or printed on the board if it is then I'm happy to provide a patch also for your MXQ board so it also uses the correct MAC address Martin
On Mon, Jul 29, 2019 at 11:45 PM Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote: > > On Mon, Jul 29, 2019 at 9:11 AM Neil Armstrong <narmstrong@baylibre.com> wrote: > > > > Hi Martin, > > > > On 27/07/2019 21:46, Martin Blumenstingl wrote: > > > Amlogic's BSP kernel defines that all boards with a MAC address stored > > > in the eFuse have it at offset 0x1b4. It is up to the board to > > > decide whether to use this MAC address or not: > > > - Odroid-C1 uses the MAC address from the eFuse > > > - EC-100 seems to read the MAC address from eMMC > > > > > > Add the nvmem cell which describes the Ethernet MAC address. Don't > > > assign it to the Ethernet controller, because depending on the board the > > > actual MAC address may be read from somewhere else. > > > > > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> > > > --- > > > arch/arm/boot/dts/meson8b.dtsi | 4 ++++ > > > 1 file changed, 4 insertions(+) > > > > > > diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi > > > index 30fca9bb4bbe..c7de58b71d08 100644 > > > --- a/arch/arm/boot/dts/meson8b.dtsi > > > +++ b/arch/arm/boot/dts/meson8b.dtsi > > > @@ -402,6 +402,10 @@ > > > clocks = <&clkc CLKID_EFUSE>; > > > clock-names = "core"; > > > > > > + ethernet_mac_address: mac@1b4 { > > > + reg = <0x1b4 0x6>; > > > + }; > > > > Is this a fixed position for all boards ? if not, I'll suggest moving > > it to the odroid-c1 dt until you have more users. > the 0x1b4 offset is hardcoded in Amlogic's kernel sources > if some board uses another offset then the manufacturer had to patch > the kernel to make it work (like Endless did) > > +Cc hexdump0815 - can you please run the following command on your > Meson8b MXQ board: > $ hexdump -C /sys/bus/nvmem/devices/meson8b-efuse0/nvmem | grep > 000001b0 | cut -d' ' -f7,8,9,10,12,13 > > this should print the MAC address that is also used by the stock > firmware and/or printed on the board > if it is then I'm happy to provide a patch also for your MXQ board so > it also uses the correct MAC address hexdump got back to me on IRC (thank you!) with unfortunate news: the MXQ board doesn't seem to have the MAC address in the eFuse at all thus I'll go with Neil's suggestion and move this to meson8b-odroidc1.dts Martin
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 30fca9bb4bbe..c7de58b71d08 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -402,6 +402,10 @@ clocks = <&clkc CLKID_EFUSE>; clock-names = "core"; + ethernet_mac_address: mac@1b4 { + reg = <0x1b4 0x6>; + }; + temperature_calib: calib@1f4 { /* only the upper two bytes are relevant */ reg = <0x1f4 0x4>;
Amlogic's BSP kernel defines that all boards with a MAC address stored in the eFuse have it at offset 0x1b4. It is up to the board to decide whether to use this MAC address or not: - Odroid-C1 uses the MAC address from the eFuse - EC-100 seems to read the MAC address from eMMC Add the nvmem cell which describes the Ethernet MAC address. Don't assign it to the Ethernet controller, because depending on the board the actual MAC address may be read from somewhere else. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- arch/arm/boot/dts/meson8b.dtsi | 4 ++++ 1 file changed, 4 insertions(+)