| Message ID | 20190612071554.13573-5-vivek.gautam@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Qcom smmu-500 wait-for-safe handling for sdm845 | expand |
On Wed 12 Jun 00:15 PDT 2019, Vivek Gautam wrote: > Indicate on MTP SDM845 that firmware implements handler to > TLB invalidate erratum SCM call where SAFE sequence is toggled > to achieve optimum performance on real-time clients, such as > display and camera. > > Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 78ec373a2b18..6a73d9744a71 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -2368,6 +2368,7 @@ > compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; > reg = <0 0x15000000 0 0x80000>; > #iommu-cells = <2>; > + qcom,smmu-500-fw-impl-safe-errata; > #global-interrupts = <1>; > interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
On 6/14/2019 9:36 AM, Bjorn Andersson wrote: > On Wed 12 Jun 00:15 PDT 2019, Vivek Gautam wrote: > >> Indicate on MTP SDM845 that firmware implements handler to >> TLB invalidate erratum SCM call where SAFE sequence is toggled >> to achieve optimum performance on real-time clients, such as >> display and camera. >> >> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> > Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Thanks Bjorn for reviewing this. Best regards Vivek [snip]
On Wed 12 Jun 00:15 PDT 2019, Vivek Gautam wrote: > Indicate on MTP SDM845 that firmware implements handler to > TLB invalidate erratum SCM call where SAFE sequence is toggled > to achieve optimum performance on real-time clients, such as > display and camera. > > Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index 78ec373a2b18..6a73d9744a71 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -2368,6 +2368,7 @@ > compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; > reg = <0 0x15000000 0 0x80000>; > #iommu-cells = <2>; > + qcom,smmu-500-fw-impl-safe-errata; Looked back at this series and started to wonder if there there is a case where this should not be set? I mean we're after all adding this to the top 845 dtsi... How about making it the default in the driver and opt out of the errata once there is a need? Regards, Bjorn > #global-interrupts = <1>; > interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, > <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
On Tue, Aug 6, 2019 at 3:56 AM Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > > On Wed 12 Jun 00:15 PDT 2019, Vivek Gautam wrote: > > > Indicate on MTP SDM845 that firmware implements handler to > > TLB invalidate erratum SCM call where SAFE sequence is toggled > > to achieve optimum performance on real-time clients, such as > > display and camera. > > > > Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> > > --- > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 + > > 1 file changed, 1 insertion(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > index 78ec373a2b18..6a73d9744a71 100644 > > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > @@ -2368,6 +2368,7 @@ > > compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; > > reg = <0 0x15000000 0 0x80000>; > > #iommu-cells = <2>; > > + qcom,smmu-500-fw-impl-safe-errata; > > Looked back at this series and started to wonder if there there is a > case where this should not be set? I mean we're after all adding this to > the top 845 dtsi... My bad. This is not valid in case of cheza. Cheza firmware doesn't implement the safe errata handling hook. On cheza we just have the liberty of accessing the secure registers through scm calls - this is what we were doing in earlier patch series handling this errata. So, a property like this should go to mtp board's dts file. Thanks Vivek > > How about making it the default in the driver and opt out of the errata > once there is a need? > > Regards, > Bjorn > > > #global-interrupts = <1>; > > interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, > > <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, > > -- > > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > > of Code Aurora Forum, hosted by The Linux Foundation > > > _______________________________________________ > iommu mailing list > iommu@lists.linux-foundation.org > https://lists.linuxfoundation.org/mailman/listinfo/iommu -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
On Sun 11 Aug 09:08 PDT 2019, Vivek Gautam wrote: > On Tue, Aug 6, 2019 at 3:56 AM Bjorn Andersson > <bjorn.andersson@linaro.org> wrote: > > > > On Wed 12 Jun 00:15 PDT 2019, Vivek Gautam wrote: > > > > > Indicate on MTP SDM845 that firmware implements handler to > > > TLB invalidate erratum SCM call where SAFE sequence is toggled > > > to achieve optimum performance on real-time clients, such as > > > display and camera. > > > > > > Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> > > > --- > > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 + > > > 1 file changed, 1 insertion(+) > > > > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > > index 78ec373a2b18..6a73d9744a71 100644 > > > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > > @@ -2368,6 +2368,7 @@ > > > compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; > > > reg = <0 0x15000000 0 0x80000>; > > > #iommu-cells = <2>; > > > + qcom,smmu-500-fw-impl-safe-errata; > > > > Looked back at this series and started to wonder if there there is a > > case where this should not be set? I mean we're after all adding this to > > the top 845 dtsi... > > My bad. > This is not valid in case of cheza. Cheza firmware doesn't implement > the safe errata handling hook. > On cheza we just have the liberty of accessing the secure registers > through scm calls - this is what > we were doing in earlier patch series handling this errata. > So, a property like this should go to mtp board's dts file. > It would have been nice if the common case was just selected by default, but afaict no safe workaround is needed on Cheza? You mention here that it should (could?) use the scm write based approach instead, would an introduction of that come with another flag? PS. In it's current form it's correct that this should be moved to the device dts files - all but one of them... Regards, Bjorn
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 78ec373a2b18..6a73d9744a71 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2368,6 +2368,7 @@ compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x80000>; #iommu-cells = <2>; + qcom,smmu-500-fw-impl-safe-errata; #global-interrupts = <1>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
Indicate on MTP SDM845 that firmware implements handler to TLB invalidate erratum SCM call where SAFE sequence is toggled to achieve optimum performance on real-time clients, such as display and camera. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 1 + 1 file changed, 1 insertion(+)