[v6,00/13] implement poweroff for mt6323 / bpi-r2

Message

Frank Wunderlich Aug. 18, 2019, 1:55 p.m. UTC

mainline-driver does not support mt6323

this series makes some cleanup to mt6397-rtc-driver, adds mt6323 and
implement power-controller on it.

tested on bananapi-r2

Original Patch from Josef Friedl

changes since v5:
	- splitted part 1 to separate changes and additions not related to pwrc
	- move mfd/mt6397/core.h from v4.8 in separate patch "add mutex include"
	- changed recipients (moved from To to Cc, removed committers)
changes since v4:
	- relative path in part 1+2
	- drop change of copyright-year in part 5
changes since v3:
	- moved SOB in 2/10 and 9/10
	- moved part 5 to 6 to be near driver-change
	- changehistory of patches below ---

changes since v2:
	- Splitted some parts and rebased on 5.3-rc2:

	v2.1 dt-bindings: add powercontroller – try to make better subject
	v2.2 separate rtc-mt6397.txt (suggested by Alexandre Belloni)
	     add missing commit-message (suggested by Matthias Brugger)
	v2.3 fix alloc after IRQ (suggested by Alexandre Belloni)
	     new compatible (splitting suggested by Alexandre Belloni)
	     needed due to different rtc-base/size see #7
	v2.4 simplifications (Define-res-macros)
	     add mt6323 rtc+pwrc
	v2.5 add poweroff-driver (no change)
	v2.6 MAINTAINERS (no change)
	v2.7 DTS-Changes (no change)


Frank Wunderlich (1):
  dt-bindings: mfd: mediatek: mt6397: change to relative paths

Josef Friedl (12):
  dt-bindings: mfd: mediatek: update rtc to include mt6323
  dt-bindings: mfd: mediatek: add mt6323 power-controller
  dt-bindings: rtc: mediatek: add missing mt6397 rtc
  rtc: mt6397: move some common definitions into rtc.h
  mfd: mt6397: add mutex include
  rtc: mt6397: improvements of rtc driver
  mfd: mt6323: some improvements of mt6397-core
  rtc: mt6397: add compatible for mt6323
  mfd: mt6323: add mt6323 rtc+pwrc
  power: reset: add driver for mt6323 poweroff
  MAINTAINERS: add Mediatek shutdown drivers
  arm: dts: mt6323: add keys, power-controller, rtc and codec

 .../devicetree/bindings/mfd/mt6397.txt        |  20 +++-
 .../bindings/power/reset/mt6323-poweroff.txt  |  20 ++++
 .../devicetree/bindings/rtc/rtc-mt6397.txt    |  29 +++++
 MAINTAINERS                                   |   7 ++
 arch/arm/boot/dts/mt6323.dtsi                 |  27 +++++
 drivers/mfd/mt6397-core.c                     |  38 +++++--
 drivers/power/reset/Kconfig                   |  10 ++
 drivers/power/reset/Makefile                  |   1 +
 drivers/power/reset/mt6323-poweroff.c         |  97 ++++++++++++++++
 drivers/rtc/rtc-mt6397.c                      | 107 ++++--------------
 include/linux/mfd/mt6397/core.h               |   2 +
 include/linux/mfd/mt6397/rtc.h                |  71 ++++++++++++
 12 files changed, 327 insertions(+), 102 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
 create mode 100644 drivers/power/reset/mt6323-poweroff.c
 create mode 100644 include/linux/mfd/mt6397/rtc.h

Comments

Frank Wunderlich Aug. 18, 2019, 2:30 p.m. UTC | #1

Arg, missed a comma between

[e-mail]
 and
Alessandro Zummo

Will send the series to linux-arm-kernel later

Sorry for that

Frank Wunderlich Sept. 6, 2019, 1:06 p.m. UTC | #2

Hi,

Just a friedly reminder.

MFD-part was applied and visible in linux-next, the other parts acknowledged by maintainers. Is anything additional needed before applying the rtc/power/dts-parts?

Regards Frank