diff mbox series

[2/2] arm64: dts: allwinner: h6: Introduce Tanix TX6 board

Message ID 20190816205342.29552-3-jernej.skrabec@siol.net (mailing list archive)
State Mainlined
Commit 652a458eb92018c5126701e721255356fdab94a9
Headers show
Series Introduce Tanix TX6 box DT | expand

Commit Message

Jernej Škrabec Aug. 16, 2019, 8:53 p.m. UTC 
Tanix TX6 is an Allwinner H6 based TV box, which supports:
- Allwinner H6 Quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 4GiB DDR3 RAM (3GiB useable)
- 100Mbps EMAC via AC200 EPHY
- Cdtech 47822BS Wifi/BT
- 2x USB 2.0 Host and 1x USB 3.0 Host
- HDMI port
- IR receiver
- 64GiB eMMC
- 5V/2A DC power supply

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../dts/allwinner/sun50i-h6-tanix-tx6.dts     | 100 ++++++++++++++++++
 2 files changed, 101 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts

Comments

Jernej Škrabec Aug. 18, 2019, 6:59 p.m. UTC | #1 
Dne nedelja, 18. avgust 2019 ob 20:42:49 CEST je kbuild test robot napisal(a):
> Hi Jernej,
> 
> Thank you for the patch! Yet something to improve:
> 
> [auto build test ERROR on linus/master]
> [cannot apply to v5.3-rc4 next-20190816]
> [if your patch is applied to the wrong git tree, please drop us a note to
> help improve the system]
> 
> url:   
> https://github.com/0day-ci/linux/commits/Jernej-Skrabec/dt-bindings-arm-sun
> xi-Add-compatible-for-Tanix-TX6-board/20190819-002034 config:
> arm64-defconfig (attached as .config)
> compiler: aarch64-linux-gcc (GCC) 7.4.0
> reproduce:
>         wget
> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O
> ~/bin/make.cross chmod +x ~/bin/make.cross
>         # save the attached .config to linux build tree
>         GCC_VERSION=7.4.0 make.cross ARCH=arm64
> 
> If you fix the issue, kindly add following tag
> Reported-by: kbuild test robot <lkp@intel.com>
> 
> All errors (new ones prefixed by >>):
> >> Error: arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts:83.1-6 Label
> >> or path r_ir not found FATAL ERROR: Syntax error parsing input tree

Strange, Allwinner tree has commit, which introduces r_ir node:
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?
h=sunxi/dt-for-5.4&id=9267811aad3524c857cf2e16bbadd8c569e15ab9

Maybe kbuild test robot tree doesn't have it?

Best regards,
Jernej

> 
> ---
> 0-DAY kernel test infrastructure                Open Source Technology
> Center https://lists.01.org/pipermail/kbuild-all                   Intel
> Corporation
Clément Péron Aug. 18, 2019, 10:18 p.m. UTC | #2 
Hi,

On Sun, 18 Aug 2019 at 21:00, Jernej Škrabec <jernej.skrabec@siol.net> wrote:
>
> Dne nedelja, 18. avgust 2019 ob 20:42:49 CEST je kbuild test robot napisal(a):
> > Hi Jernej,
> >
> > Thank you for the patch! Yet something to improve:
> >
> > [auto build test ERROR on linus/master]
> > [cannot apply to v5.3-rc4 next-20190816]
> > [if your patch is applied to the wrong git tree, please drop us a note to
> > help improve the system]
> >
> > url:
> > https://github.com/0day-ci/linux/commits/Jernej-Skrabec/dt-bindings-arm-sun
> > xi-Add-compatible-for-Tanix-TX6-board/20190819-002034 config:
> > arm64-defconfig (attached as .config)
> > compiler: aarch64-linux-gcc (GCC) 7.4.0
> > reproduce:
> >         wget
> > https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O
> > ~/bin/make.cross chmod +x ~/bin/make.cross
> >         # save the attached .config to linux build tree
> >         GCC_VERSION=7.4.0 make.cross ARCH=arm64
> >
> > If you fix the issue, kindly add following tag
> > Reported-by: kbuild test robot <lkp@intel.com>
> >
> > All errors (new ones prefixed by >>):
> > >> Error: arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts:83.1-6 Label
> > >> or path r_ir not found FATAL ERROR: Syntax error parsing input tree
>
> Strange, Allwinner tree has commit, which introduces r_ir node:
> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?
> h=sunxi/dt-for-5.4&id=9267811aad3524c857cf2e16bbadd8c569e15ab9
>
> Maybe kbuild test robot tree doesn't have it?
Yes Kbuild is on v5.3-rc4 vs the IR patch is planned for 5.4.

Regards,
Clément

>
> Best regards,
> Jernej
>
> >
> > ---
> > 0-DAY kernel test infrastructure                Open Source Technology
> > Center https://lists.01.org/pipermail/kbuild-all                   Intel
> > Corporation
>
>
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Chen, Rong A Sept. 2, 2019, 7:05 a.m. UTC | #3 
Hi,

On 8/19/19 2:59 AM, Jernej Škrabec wrote:
> Dne nedelja, 18. avgust 2019 ob 20:42:49 CEST je kbuild test robot napisal(a):
>> Hi Jernej,
>>
>> Thank you for the patch! Yet something to improve:
>>
>> [auto build test ERROR on linus/master]
>> [cannot apply to v5.3-rc4 next-20190816]
>> [if your patch is applied to the wrong git tree, please drop us a note to
>> help improve the system]
>>
>> url:
>> https://github.com/0day-ci/linux/commits/Jernej-Skrabec/dt-bindings-arm-sun
>> xi-Add-compatible-for-Tanix-TX6-board/20190819-002034 config:
>> arm64-defconfig (attached as .config)
>> compiler: aarch64-linux-gcc (GCC) 7.4.0
>> reproduce:
>>          wget
>> https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O
>> ~/bin/make.cross chmod +x ~/bin/make.cross
>>          # save the attached .config to linux build tree
>>          GCC_VERSION=7.4.0 make.cross ARCH=arm64
>>
>> If you fix the issue, kindly add following tag
>> Reported-by: kbuild test robot <lkp@intel.com>
>>
>> All errors (new ones prefixed by >>):
>>>> Error: arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts:83.1-6 Label
>>>> or path r_ir not found FATAL ERROR: Syntax error parsing input tree
> Strange, Allwinner tree has commit, which introduces r_ir node:
> https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git/commit/?
> h=sunxi/dt-for-5.4&id=9267811aad3524c857cf2e16bbadd8c569e15ab9
>
> Maybe kbuild test robot tree doesn't have it?

The tree is in our list. 
https://github.com/intel/lkp-tests/blob/master/repo/linux/sunxi
Robot also tries to apply patches to a git tree to test. Maybe your 
patch was applied to a wrong git tree.

Best Regards,
Rong Chen
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index f6db0611cb85..395fe76f6819 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -25,3 +25,4 @@  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-3.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
new file mode 100644
index 000000000000..7e7cb10e3d96
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -0,0 +1,100 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Tanix TX6";
+	compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	status = "okay";
+};