mbox series

[0/2] Introduce Tanix TX6 box DT

Message ID 20190816205342.29552-1-jernej.skrabec@siol.net (mailing list archive)
Headers show
Series Introduce Tanix TX6 box DT | expand

Message

Jernej Škrabec Aug. 16, 2019, 8:53 p.m. UTC 
This series adds support for Tanix TX6 box:
- Allwinner H6 Quad-core 64-bit ARM Cortex-A53
- GPU Mali-T720
- 4GiB DDR3 RAM (3GiB useable)
- 100Mbps EMAC via AC200 EPHY
- Cdtech 47822BS Wifi/BT
- 2x USB 2.0 Host and 1x USB 3.0 Host
- HDMI port
- IR receiver
- 64GiB eMMC
- 5V/2A DC power supply

Patch 1 adds compatible strings to dt bindings documentation.

Patch 2 adds Tanix TX6 DT.

Best regards,
Jernej

Jernej Skrabec (2):
  dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board
  arm64: dts: allwinner: h6: Introduce Tanix TX6 board

 .../devicetree/bindings/arm/sunxi.yaml        |   5 +
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../dts/allwinner/sun50i-h6-tanix-tx6.dts     | 100 ++++++++++++++++++
 3 files changed, 106 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts

Comments

Maxime Ripard Aug. 19, 2019, 1:44 p.m. UTC | #1 
On Fri, Aug 16, 2019 at 10:53:40PM +0200, Jernej Skrabec wrote:
> This series adds support for Tanix TX6 box:
> - Allwinner H6 Quad-core 64-bit ARM Cortex-A53
> - GPU Mali-T720
> - 4GiB DDR3 RAM (3GiB useable)
> - 100Mbps EMAC via AC200 EPHY
> - Cdtech 47822BS Wifi/BT
> - 2x USB 2.0 Host and 1x USB 3.0 Host
> - HDMI port
> - IR receiver
> - 64GiB eMMC
> - 5V/2A DC power supply
>
> Patch 1 adds compatible strings to dt bindings documentation.
>
> Patch 2 adds Tanix TX6 DT.

Applied both, thanks

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com