diff mbox series

drm/drv: Use // for comments in example code

Message ID 20190808163629.14280-1-j.neuschaefer@gmx.net (mailing list archive)
State New, archived
Headers show
Series drm/drv: Use // for comments in example code | expand

Commit Message

J. Neuschäfer Aug. 8, 2019, 4:36 p.m. UTC
This improves Sphinx output in two ways:

- It avoids an unmatched single-quote ('), about which Sphinx complained:

  /.../Documentation/gpu/drm-internals.rst:298:
    WARNING: Could not lex literal_block as "c". Highlighting skipped.

  An alternative approach would be to replace "can't" with a word that
  doesn't have a single-quote.

- It lets Sphinx format the comments in italics and grey, making the
  code slightly easier to read.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
 drivers/gpu/drm/drm_drv.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

--
2.20.1

Comments

Sam Ravnborg Aug. 11, 2019, 9:32 p.m. UTC | #1
On Thu, Aug 08, 2019 at 06:36:28PM +0200, Jonathan Neuschäfer wrote:
> This improves Sphinx output in two ways:
> 
> - It avoids an unmatched single-quote ('), about which Sphinx complained:
> 
>   /.../Documentation/gpu/drm-internals.rst:298:
>     WARNING: Could not lex literal_block as "c". Highlighting skipped.
> 
>   An alternative approach would be to replace "can't" with a word that
>   doesn't have a single-quote.
> 
> - It lets Sphinx format the comments in italics and grey, making the
>   code slightly easier to read.
> 
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>

The result looks much better now - thanks.

I wonder if there is a better way to embed a code sample
than reverting to // style comments.

As the kernel do not like // comments we should try to avoid them in
examples.

Mauro/Jon?

	Sam

> ---
>  drivers/gpu/drm/drm_drv.c | 14 ++++++--------
>  1 file changed, 6 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
> index 9d00947ca447..769feefeeeef 100644
> --- a/drivers/gpu/drm/drm_drv.c
> +++ b/drivers/gpu/drm/drm_drv.c
> @@ -328,11 +328,9 @@ void drm_minor_release(struct drm_minor *minor)
>   *		struct drm_device *drm;
>   *		int ret;
>   *
> - *		[
> - *		  devm_kzalloc() can't be used here because the drm_device
> - *		  lifetime can exceed the device lifetime if driver unbind
> - *		  happens when userspace still has open file descriptors.
> - *		]
> + *		// devm_kzalloc() can't be used here because the drm_device '
> + *		// lifetime can exceed the device lifetime if driver unbind
> + *		// happens when userspace still has open file descriptors.
>   *		priv = kzalloc(sizeof(*priv), GFP_KERNEL);
>   *		if (!priv)
>   *			return -ENOMEM;
> @@ -355,7 +353,7 @@ void drm_minor_release(struct drm_minor *minor)
>   *		if (IS_ERR(priv->pclk))
>   *			return PTR_ERR(priv->pclk);
>   *
> - *		[ Further setup, display pipeline etc ]
> + *		// Further setup, display pipeline etc
>   *
>   *		platform_set_drvdata(pdev, drm);
>   *
> @@ -370,7 +368,7 @@ void drm_minor_release(struct drm_minor *minor)
>   *		return 0;
>   *	}
>   *
> - *	[ This function is called before the devm_ resources are released ]
> + *	// This function is called before the devm_ resources are released
>   *	static int driver_remove(struct platform_device *pdev)
>   *	{
>   *		struct drm_device *drm = platform_get_drvdata(pdev);
> @@ -381,7 +379,7 @@ void drm_minor_release(struct drm_minor *minor)
>   *		return 0;
>   *	}
>   *
> - *	[ This function is called on kernel restart and shutdown ]
> + *	// This function is called on kernel restart and shutdown
>   *	static void driver_shutdown(struct platform_device *pdev)
>   *	{
>   *		drm_atomic_helper_shutdown(platform_get_drvdata(pdev));
> --
> 2.20.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Jonathan Corbet Aug. 13, 2019, 10:07 p.m. UTC | #2
On Sun, 11 Aug 2019 23:32:15 +0200
Sam Ravnborg <sam@ravnborg.org> wrote:

> I wonder if there is a better way to embed a code sample
> than reverting to // style comments.
> 
> As the kernel do not like // comments we should try to avoid them in
> examples.

If you're embedding a code sample *into a code comment* then I suspect
this is about as good as it gets.  The alternative is to put it in as a
plain literal text block.  That would lose the syntax highlighting; I
think that's an entirely bearable cost, but others seem to feel
differently about it.

Thanks,

jon
Jani Nikula Aug. 14, 2019, 7:37 a.m. UTC | #3
On Tue, 13 Aug 2019, Jonathan Corbet <corbet@lwn.net> wrote:
> On Sun, 11 Aug 2019 23:32:15 +0200
> Sam Ravnborg <sam@ravnborg.org> wrote:
>
>> I wonder if there is a better way to embed a code sample
>> than reverting to // style comments.
>> 
>> As the kernel do not like // comments we should try to avoid them in
>> examples.
>
> If you're embedding a code sample *into a code comment* then I suspect
> this is about as good as it gets.  The alternative is to put it in as a
> plain literal text block.  That would lose the syntax highlighting; I
> think that's an entirely bearable cost, but others seem to feel
> differently about it.

Not really a Sphinx limitation, is it? You can't embed a /* */ block
comment within a /* */ block comment anyway, Sphinx or not.

BR,
Jani.
Sam Ravnborg Aug. 19, 2019, 5:06 p.m. UTC | #4
Hi Jonathan.

Thanks for making this more readable in the html output.

On Thu, Aug 08, 2019 at 06:36:28PM +0200, Jonathan Neuschäfer wrote:
> This improves Sphinx output in two ways:
> 
> - It avoids an unmatched single-quote ('), about which Sphinx complained:
> 
>   /.../Documentation/gpu/drm-internals.rst:298:
>     WARNING: Could not lex literal_block as "c". Highlighting skipped.
> 
>   An alternative approach would be to replace "can't" with a word that
>   doesn't have a single-quote.
> 
> - It lets Sphinx format the comments in italics and grey, making the
>   code slightly easier to read.
> 
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>

I got Acked-by from Daniel Vetter and has now applied this patch
to drm-misc-next.
It will show up in linux-next after the merge window.

	Sam
diff mbox series

Patch

diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index 9d00947ca447..769feefeeeef 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -328,11 +328,9 @@  void drm_minor_release(struct drm_minor *minor)
  *		struct drm_device *drm;
  *		int ret;
  *
- *		[
- *		  devm_kzalloc() can't be used here because the drm_device
- *		  lifetime can exceed the device lifetime if driver unbind
- *		  happens when userspace still has open file descriptors.
- *		]
+ *		// devm_kzalloc() can't be used here because the drm_device '
+ *		// lifetime can exceed the device lifetime if driver unbind
+ *		// happens when userspace still has open file descriptors.
  *		priv = kzalloc(sizeof(*priv), GFP_KERNEL);
  *		if (!priv)
  *			return -ENOMEM;
@@ -355,7 +353,7 @@  void drm_minor_release(struct drm_minor *minor)
  *		if (IS_ERR(priv->pclk))
  *			return PTR_ERR(priv->pclk);
  *
- *		[ Further setup, display pipeline etc ]
+ *		// Further setup, display pipeline etc
  *
  *		platform_set_drvdata(pdev, drm);
  *
@@ -370,7 +368,7 @@  void drm_minor_release(struct drm_minor *minor)
  *		return 0;
  *	}
  *
- *	[ This function is called before the devm_ resources are released ]
+ *	// This function is called before the devm_ resources are released
  *	static int driver_remove(struct platform_device *pdev)
  *	{
  *		struct drm_device *drm = platform_get_drvdata(pdev);
@@ -381,7 +379,7 @@  void drm_minor_release(struct drm_minor *minor)
  *		return 0;
  *	}
  *
- *	[ This function is called on kernel restart and shutdown ]
+ *	// This function is called on kernel restart and shutdown
  *	static void driver_shutdown(struct platform_device *pdev)
  *	{
  *		drm_atomic_helper_shutdown(platform_get_drvdata(pdev));