| Message ID | 1566450236-36757-4-git-send-email-haiyangz@microsoft.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | Add software backchannel and mlx5e HV VHCA stats | expand |
On Thu, Aug 22, 2019 at 05:05:47AM +0000, Haiyang Zhang wrote: > From: Eran Ben Elisha <eranbe@mellanox.com> > > Add wrapper functions for HyperV PCIe read / write / > block_invalidate_register operations. This will be used as an > infrastructure in the downstream patch for software communication. > > This will be enabled by default if CONFIG_PCI_HYPERV_INTERFACE is set. > > Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> > Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> > Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> > --- > drivers/net/ethernet/mellanox/mlx5/core/Makefile | 1 + > drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c | 64 ++++++++++++++++++++++++ > drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h | 22 ++++++++ > 3 files changed, 87 insertions(+) > create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c > create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h > > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile > index bcf3655..fd32a5b 100644 > --- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile > +++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile > @@ -45,6 +45,7 @@ mlx5_core-$(CONFIG_MLX5_ESWITCH) += eswitch.o eswitch_offloads.o eswitch_offlo > mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o > mlx5_core-$(CONFIG_VXLAN) += lib/vxlan.o > mlx5_core-$(CONFIG_PTP_1588_CLOCK) += lib/clock.o > +mlx5_core-$(CONFIG_PCI_HYPERV_INTERFACE) += lib/hv.o > > # > # Ipoib netdev > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c > new file mode 100644 > index 0000000..cf08d02 > --- /dev/null > +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c > @@ -0,0 +1,64 @@ > +// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB > +// Copyright (c) 2018 Mellanox Technologies > + > +#include <linux/hyperv.h> > +#include "mlx5_core.h" > +#include "lib/hv.h" > + > +static int mlx5_hv_config_common(struct mlx5_core_dev *dev, void *buf, int len, > + int offset, bool read) > +{ > + int rc = -EOPNOTSUPP; > + int bytes_returned; > + int block_id; > + > + if (offset % HV_CONFIG_BLOCK_SIZE_MAX || len % HV_CONFIG_BLOCK_SIZE_MAX) > + return -EINVAL; > + > + block_id = offset / HV_CONFIG_BLOCK_SIZE_MAX; > + > + rc = read ? > + hyperv_read_cfg_blk(dev->pdev, buf, > + HV_CONFIG_BLOCK_SIZE_MAX, block_id, > + &bytes_returned) : > + hyperv_write_cfg_blk(dev->pdev, buf, > + HV_CONFIG_BLOCK_SIZE_MAX, block_id); > + > + /* Make sure len bytes were read successfully */ > + if (read) > + rc |= !(len == bytes_returned); Unclear what do you want to achieve here, for read == true, "rc" will have result of hyperv_read_cfg_blk(), which can be an error too. It means that your "rc |= .." will give interesting results. > + > + if (rc) { > + mlx5_core_err(dev, "Failed to %s hv config, err = %d, len = %d, offset = %d\n", > + read ? "read" : "write", rc, len, > + offset); > + return rc; > + } > + > + return 0; > +} > + > +int mlx5_hv_read_config(struct mlx5_core_dev *dev, void *buf, int len, > + int offset) > +{ > + return mlx5_hv_config_common(dev, buf, len, offset, true); > +} > + > +int mlx5_hv_write_config(struct mlx5_core_dev *dev, void *buf, int len, > + int offset) > +{ > + return mlx5_hv_config_common(dev, buf, len, offset, false); > +} > + > +int mlx5_hv_register_invalidate(struct mlx5_core_dev *dev, void *context, > + void (*block_invalidate)(void *context, > + u64 block_mask)) > +{ > + return hyperv_reg_block_invalidate(dev->pdev, context, > + block_invalidate); > +} > + > +void mlx5_hv_unregister_invalidate(struct mlx5_core_dev *dev) > +{ > + hyperv_reg_block_invalidate(dev->pdev, NULL, NULL); > +} > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h > new file mode 100644 > index 0000000..f9a4557 > --- /dev/null > +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h > @@ -0,0 +1,22 @@ > +/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */ > +/* Copyright (c) 2019 Mellanox Technologies. */ > + > +#ifndef __LIB_HV_H__ > +#define __LIB_HV_H__ > + > +#if IS_ENABLED(CONFIG_PCI_HYPERV_INTERFACE) The common way to write it if(IS_ENABLED(CONFIG_FOO)) inside the code and #ifdef CONFIG_FOO for header files. > + > +#include <linux/hyperv.h> > +#include <linux/mlx5/driver.h> > + > +int mlx5_hv_read_config(struct mlx5_core_dev *dev, void *buf, int len, > + int offset); > +int mlx5_hv_write_config(struct mlx5_core_dev *dev, void *buf, int len, > + int offset); > +int mlx5_hv_register_invalidate(struct mlx5_core_dev *dev, void *context, > + void (*block_invalidate)(void *context, > + u64 block_mask)); > +void mlx5_hv_unregister_invalidate(struct mlx5_core_dev *dev); > +#endif > + > +#endif /* __LIB_HV_H__ */ > -- > 1.8.3.1 >
On 8/22/2019 8:38 PM, Leon Romanovsky wrote: > On Thu, Aug 22, 2019 at 05:05:47AM +0000, Haiyang Zhang wrote: >> From: Eran Ben Elisha <eranbe@mellanox.com> >> >> Add wrapper functions for HyperV PCIe read / write / >> block_invalidate_register operations. This will be used as an >> infrastructure in the downstream patch for software communication. >> >> This will be enabled by default if CONFIG_PCI_HYPERV_INTERFACE is set. >> >> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> >> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> >> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> >> --- >> drivers/net/ethernet/mellanox/mlx5/core/Makefile | 1 + >> drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c | 64 ++++++++++++++++++++++++ >> drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h | 22 ++++++++ >> 3 files changed, 87 insertions(+) >> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c >> create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h >> >> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile >> index bcf3655..fd32a5b 100644 >> --- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile >> +++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile >> @@ -45,6 +45,7 @@ mlx5_core-$(CONFIG_MLX5_ESWITCH) += eswitch.o eswitch_offloads.o eswitch_offlo >> mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o >> mlx5_core-$(CONFIG_VXLAN) += lib/vxlan.o >> mlx5_core-$(CONFIG_PTP_1588_CLOCK) += lib/clock.o >> +mlx5_core-$(CONFIG_PCI_HYPERV_INTERFACE) += lib/hv.o >> >> # >> # Ipoib netdev >> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c >> new file mode 100644 >> index 0000000..cf08d02 >> --- /dev/null >> +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c >> @@ -0,0 +1,64 @@ >> +// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB >> +// Copyright (c) 2018 Mellanox Technologies >> + >> +#include <linux/hyperv.h> >> +#include "mlx5_core.h" >> +#include "lib/hv.h" >> + >> +static int mlx5_hv_config_common(struct mlx5_core_dev *dev, void *buf, int len, >> + int offset, bool read) >> +{ >> + int rc = -EOPNOTSUPP; >> + int bytes_returned; >> + int block_id; >> + >> + if (offset % HV_CONFIG_BLOCK_SIZE_MAX || len % HV_CONFIG_BLOCK_SIZE_MAX) >> + return -EINVAL; >> + >> + block_id = offset / HV_CONFIG_BLOCK_SIZE_MAX; >> + >> + rc = read ? >> + hyperv_read_cfg_blk(dev->pdev, buf, >> + HV_CONFIG_BLOCK_SIZE_MAX, block_id, >> + &bytes_returned) : >> + hyperv_write_cfg_blk(dev->pdev, buf, >> + HV_CONFIG_BLOCK_SIZE_MAX, block_id); >> + >> + /* Make sure len bytes were read successfully */ >> + if (read) >> + rc |= !(len == bytes_returned); > > Unclear what do you want to achieve here, for read == true, "rc" will > have result of hyperv_read_cfg_blk(), which can be an error too. > It means that your "rc |= .." will give interesting results. Will fix. > >> + >> + if (rc) { >> + mlx5_core_err(dev, "Failed to %s hv config, err = %d, len = %d, offset = %d\n", >> + read ? "read" : "write", rc, len, >> + offset); >> + return rc; >> + } >> + >> + return 0; >> +} >> + >> +int mlx5_hv_read_config(struct mlx5_core_dev *dev, void *buf, int len, >> + int offset) >> +{ >> + return mlx5_hv_config_common(dev, buf, len, offset, true); >> +} >> + >> +int mlx5_hv_write_config(struct mlx5_core_dev *dev, void *buf, int len, >> + int offset) >> +{ >> + return mlx5_hv_config_common(dev, buf, len, offset, false); >> +} >> + >> +int mlx5_hv_register_invalidate(struct mlx5_core_dev *dev, void *context, >> + void (*block_invalidate)(void *context, >> + u64 block_mask)) >> +{ >> + return hyperv_reg_block_invalidate(dev->pdev, context, >> + block_invalidate); >> +} >> + >> +void mlx5_hv_unregister_invalidate(struct mlx5_core_dev *dev) >> +{ >> + hyperv_reg_block_invalidate(dev->pdev, NULL, NULL); >> +} >> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h >> new file mode 100644 >> index 0000000..f9a4557 >> --- /dev/null >> +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h >> @@ -0,0 +1,22 @@ >> +/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */ >> +/* Copyright (c) 2019 Mellanox Technologies. */ >> + >> +#ifndef __LIB_HV_H__ >> +#define __LIB_HV_H__ >> + >> +#if IS_ENABLED(CONFIG_PCI_HYPERV_INTERFACE) > > The common way to write it if(IS_ENABLED(CONFIG_FOO)) inside the code all IS_ENABLED in mlx5 are written without parenthesis, I will stay aligned with it. > and #ifdef CONFIG_FOO for header files. This will not work for loadable modules such as PCI_HYPERV_INTERFACE. Need true here also for =m in h files as well. > >> + >> +#include <linux/hyperv.h> >> +#include <linux/mlx5/driver.h> >> + >> +int mlx5_hv_read_config(struct mlx5_core_dev *dev, void *buf, int len, >> + int offset); >> +int mlx5_hv_write_config(struct mlx5_core_dev *dev, void *buf, int len, >> + int offset); >> +int mlx5_hv_register_invalidate(struct mlx5_core_dev *dev, void *context, >> + void (*block_invalidate)(void *context, >> + u64 block_mask)); >> +void mlx5_hv_unregister_invalidate(struct mlx5_core_dev *dev); >> +#endif >> + >> +#endif /* __LIB_HV_H__ */ >> -- >> 1.8.3.1 >>
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile index bcf3655..fd32a5b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile +++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile @@ -45,6 +45,7 @@ mlx5_core-$(CONFIG_MLX5_ESWITCH) += eswitch.o eswitch_offloads.o eswitch_offlo mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o mlx5_core-$(CONFIG_VXLAN) += lib/vxlan.o mlx5_core-$(CONFIG_PTP_1588_CLOCK) += lib/clock.o +mlx5_core-$(CONFIG_PCI_HYPERV_INTERFACE) += lib/hv.o # # Ipoib netdev diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c new file mode 100644 index 0000000..cf08d02 --- /dev/null +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB +// Copyright (c) 2018 Mellanox Technologies + +#include <linux/hyperv.h> +#include "mlx5_core.h" +#include "lib/hv.h" + +static int mlx5_hv_config_common(struct mlx5_core_dev *dev, void *buf, int len, + int offset, bool read) +{ + int rc = -EOPNOTSUPP; + int bytes_returned; + int block_id; + + if (offset % HV_CONFIG_BLOCK_SIZE_MAX || len % HV_CONFIG_BLOCK_SIZE_MAX) + return -EINVAL; + + block_id = offset / HV_CONFIG_BLOCK_SIZE_MAX; + + rc = read ? + hyperv_read_cfg_blk(dev->pdev, buf, + HV_CONFIG_BLOCK_SIZE_MAX, block_id, + &bytes_returned) : + hyperv_write_cfg_blk(dev->pdev, buf, + HV_CONFIG_BLOCK_SIZE_MAX, block_id); + + /* Make sure len bytes were read successfully */ + if (read) + rc |= !(len == bytes_returned); + + if (rc) { + mlx5_core_err(dev, "Failed to %s hv config, err = %d, len = %d, offset = %d\n", + read ? "read" : "write", rc, len, + offset); + return rc; + } + + return 0; +} + +int mlx5_hv_read_config(struct mlx5_core_dev *dev, void *buf, int len, + int offset) +{ + return mlx5_hv_config_common(dev, buf, len, offset, true); +} + +int mlx5_hv_write_config(struct mlx5_core_dev *dev, void *buf, int len, + int offset) +{ + return mlx5_hv_config_common(dev, buf, len, offset, false); +} + +int mlx5_hv_register_invalidate(struct mlx5_core_dev *dev, void *context, + void (*block_invalidate)(void *context, + u64 block_mask)) +{ + return hyperv_reg_block_invalidate(dev->pdev, context, + block_invalidate); +} + +void mlx5_hv_unregister_invalidate(struct mlx5_core_dev *dev) +{ + hyperv_reg_block_invalidate(dev->pdev, NULL, NULL); +} diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h new file mode 100644 index 0000000..f9a4557 --- /dev/null +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/hv.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 OR Linux-OpenIB */ +/* Copyright (c) 2019 Mellanox Technologies. */ + +#ifndef __LIB_HV_H__ +#define __LIB_HV_H__ + +#if IS_ENABLED(CONFIG_PCI_HYPERV_INTERFACE) + +#include <linux/hyperv.h> +#include <linux/mlx5/driver.h> + +int mlx5_hv_read_config(struct mlx5_core_dev *dev, void *buf, int len, + int offset); +int mlx5_hv_write_config(struct mlx5_core_dev *dev, void *buf, int len, + int offset); +int mlx5_hv_register_invalidate(struct mlx5_core_dev *dev, void *context, + void (*block_invalidate)(void *context, + u64 block_mask)); +void mlx5_hv_unregister_invalidate(struct mlx5_core_dev *dev); +#endif + +#endif /* __LIB_HV_H__ */