@@ -24,6 +24,7 @@ Function Reference
cec-ioc-adap-g-caps
cec-ioc-adap-g-log-addrs
cec-ioc-adap-g-phys-addr
+ cec-ioc-adap-g-conn-info
cec-ioc-dqevent
cec-ioc-g-mode
cec-ioc-receive
@@ -135,8 +135,12 @@ returns the information to the application. The ioctl never fails.
- The CEC hardware can monitor CEC pin changes from low to high voltage
and vice versa. When in pin monitoring mode the application will
receive ``CEC_EVENT_PIN_CEC_LOW`` and ``CEC_EVENT_PIN_CEC_HIGH`` events.
+ * .. _`CEC-CAP-CONNECTOR-INFO`:
-
+ - ``CEC_CAP_CONNECTOR_INFO``
+ - 0x00000100
+ - If this capability is set, then :ref:`CEC_ADAP_G_CONNECTOR_INFO` can
+ be used.
Return Value
============
new file mode 100644
@@ -0,0 +1,105 @@
+.. SPDX-License-Identifier: GPL-2.0
+..
+.. Copyright 2019 Google LLC
+..
+.. _CEC_ADAP_G_CONNECTOR_INFO:
+
+*******************************
+ioctl CEC_ADAP_G_CONNECTOR_INFO
+*******************************
+
+Name
+====
+
+CEC_ADAP_G_CONNECTOR_INFO - Query HDMI connector information
+
+Synopsis
+========
+
+.. c:function:: int ioctl( int fd, CEC_ADAP_G_CONNECTOR_INFO, struct cec_connector_info *argp )
+ :name: CEC_ADAP_G_CONNECTOR_INFO
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by :c:func:`open() <cec-open>`.
+
+``argp``
+
+
+Description
+===========
+
+Using this ioctl an application can learn which HDMI connector this CEC
+device corresponds to. While calling this ioctl the application should
+provide a pointer to a cec_connector_info struct which will be populated
+by the kernel with the info provided by the adapter's driver. This ioctl
+is only available if the ``CEC_CAP_CONNECTOR_INFO`` capability is set.
+
+.. tabularcolumns:: |p{1.0cm}|p{4.4cm}|p{2.5cm}|p{9.6cm}|
+
+.. c:type:: cec_connector_info
+
+.. flat-table:: struct cec_connector_info
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 1 1 1 8
+
+ * - __u32
+ - ``type``
+ - The type of connector this adapter is associated with.
+ * - union
+ - ``(anonymous)``
+ -
+ * -
+ - ``struct cec_drm_connector_info``
+ - drm
+ - :ref:`cec-drm-connector-info`
+
+
+.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
+
+.. _connector-type:
+
+.. flat-table:: Connector types
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 3 1 8
+
+ * .. _`CEC-CONNECTOR-TYPE-NO-CONNECTOR`:
+
+ - ``CEC_CONNECTOR_TYPE_NO_CONNECTOR``
+ - 0
+ - No connector is associated with the adapter/the information is not
+ provided by the driver.
+ * .. _`CEC-CONNECTOR-TYPE-DRM`:
+
+ - ``CEC_CONNECTOR_TYPE_DRM``
+ - 1
+ - Indicates that a DRM connector is associated with this adapter.
+ Information about the connector can be found in
+ :ref:`cec-drm-connector-info`.
+
+.. tabularcolumns:: |p{4.4cm}|p{2.5cm}|p{10.6cm}|
+
+.. c:type:: cec_drm_connector_info
+
+.. _cec-drm-connector-info:
+
+.. flat-table:: struct cec_drm_connector_info
+ :header-rows: 0
+ :stub-columns: 0
+ :widths: 3 1 8
+
+ * .. _`CEC-DRM-CONNECTOR-TYPE-CARD-NO`:
+
+ - __u32
+ - ``card_no``
+ - DRM card number: the number from a card's path, e.g. 0 in case of
+ /dev/card0.
+ * .. _`CEC-DRM-CONNECTOR-TYPE-CONNECTOR_ID`:
+
+ - __u32
+ - ``connector_id``
+ - DRM connector ID.
@@ -70,6 +70,14 @@ it is guaranteed that the state did change in between the two events.
addresses are claimed or if ``phys_addr`` is ``CEC_PHYS_ADDR_INVALID``.
If bit 15 is set (``1 << CEC_LOG_ADDR_UNREGISTERED``) then this device
has the unregistered logical address. In that case all other bits are 0.
+ * - __u16
+ - ``have_conn_info``
+ - If non-zero, then HDMI connector information is available.
+ This field is only valid if ``CEC_CAP_CONNECTOR_INFO`` is set. If that
+ capability is set and ``have_conn_info`` is zero, then that indicates
+ that the HDMI connector device is not instantiated, either because
+ the HDMI driver is still configuring the device or because the HDMI
+ device was unbound.
.. c:type:: cec_event_lost_msgs