| Message ID | 20190831030916.13172-2-peter@typeblog.net (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/2] gpio: acpi: add quirk to override GpioInt polarity | expand |
On Sat, Aug 31, 2019 at 11:09:15AM +0800, Peter Cai wrote: > The firmware of GPD P2 Max could not handle panel resets although code > is present in DSDT. The kernel needs to take on this job instead, but > the DSDT does not provide _DSD, rendering kernel helpless when trying to > find the respective GPIO pins. > > Fortunately, this time GPD has proper DMI vendor / product strings that > we could match against. We simply apply an acpi_gpio_mapping table when > GPD P2 Max is matched. > > Additionally, the DSDT definition of the irq pin specifies a wrong > polarity. The new quirk introduced in the previous patch > (ACPI_GPIO_QUIRK_OVERRIDE_POLARITY) is applied to correct this. FWIW, Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> though one comment below. > > Signed-off-by: Peter Cai <peter@typeblog.net> > --- > > v2: removed '#ifdef CONFIG_ACPI' as per suggestion. The #ifdef guards > for CONFIG_DMI is kept for consistency with the other dmi_system_id > definition in the same file. > --- > drivers/input/touchscreen/goodix.c | 31 ++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c > index 5178ea8b5f30..df476f7dcd95 100644 > --- a/drivers/input/touchscreen/goodix.c > +++ b/drivers/input/touchscreen/goodix.c > @@ -144,6 +144,31 @@ static const struct dmi_system_id rotated_screen[] = { > {} > }; > > +static const struct acpi_gpio_params irq_gpios_default = { 0, 0, false }; > +static const struct acpi_gpio_params reset_gpios_default = { 1, 0, false }; > +static const struct acpi_gpio_mapping gpio_mapping_force_irq_active_high[] = { > + { "irq-gpios", &irq_gpios_default, 1, ACPI_GPIO_QUIRK_OVERRIDE_POLARITY }, > + { "reset-gpios", &reset_gpios_default, 1 }, > + {} > +}; > + > +/* > + * Devices that need acpi_gpio_mapping to function correctly > + */ > +static const struct dmi_system_id need_gpio_mapping[] = { > +#if defined(CONFIG_DMI) && defined(CONFIG_X86) > + { > + .ident = "GPD P2 Max", > + .matches = { > + DMI_MATCH(DMI_SYS_VENDOR, "GPD"), > + DMI_MATCH(DMI_PRODUCT_NAME, "P2 MAX") > + }, > + .driver_data = &gpio_mapping_force_irq_active_high > + }, > +#endif > + {} > +}; > + > /** > * goodix_i2c_read - read data from a register of the i2c slave device. > * > @@ -795,6 +820,12 @@ static int goodix_ts_probe(struct i2c_client *client, > { > struct goodix_ts_data *ts; > int error; > + struct dmi_system_id *dmi_match; I guess it should be const as kbuild bot complained on v1. And perhaps you want to keep reverse xmas tree order in definition block: const struct dmi_system_id *dmi_match; struct goodix_ts_data *ts; int error; > + > + dmi_match = dmi_first_match(need_gpio_mapping); > + if (dmi_match) > + devm_acpi_dev_add_driver_gpios(&client->dev, > + dmi_match->driver_data); > > dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr); > > -- > 2.23.0 >
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 5178ea8b5f30..df476f7dcd95 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -144,6 +144,31 @@ static const struct dmi_system_id rotated_screen[] = { {} }; +static const struct acpi_gpio_params irq_gpios_default = { 0, 0, false }; +static const struct acpi_gpio_params reset_gpios_default = { 1, 0, false }; +static const struct acpi_gpio_mapping gpio_mapping_force_irq_active_high[] = { + { "irq-gpios", &irq_gpios_default, 1, ACPI_GPIO_QUIRK_OVERRIDE_POLARITY }, + { "reset-gpios", &reset_gpios_default, 1 }, + {} +}; + +/* + * Devices that need acpi_gpio_mapping to function correctly + */ +static const struct dmi_system_id need_gpio_mapping[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) + { + .ident = "GPD P2 Max", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "GPD"), + DMI_MATCH(DMI_PRODUCT_NAME, "P2 MAX") + }, + .driver_data = &gpio_mapping_force_irq_active_high + }, +#endif + {} +}; + /** * goodix_i2c_read - read data from a register of the i2c slave device. * @@ -795,6 +820,12 @@ static int goodix_ts_probe(struct i2c_client *client, { struct goodix_ts_data *ts; int error; + struct dmi_system_id *dmi_match; + + dmi_match = dmi_first_match(need_gpio_mapping); + if (dmi_match) + devm_acpi_dev_add_driver_gpios(&client->dev, + dmi_match->driver_data); dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr);
The firmware of GPD P2 Max could not handle panel resets although code is present in DSDT. The kernel needs to take on this job instead, but the DSDT does not provide _DSD, rendering kernel helpless when trying to find the respective GPIO pins. Fortunately, this time GPD has proper DMI vendor / product strings that we could match against. We simply apply an acpi_gpio_mapping table when GPD P2 Max is matched. Additionally, the DSDT definition of the irq pin specifies a wrong polarity. The new quirk introduced in the previous patch (ACPI_GPIO_QUIRK_OVERRIDE_POLARITY) is applied to correct this. Signed-off-by: Peter Cai <peter@typeblog.net> --- v2: removed '#ifdef CONFIG_ACPI' as per suggestion. The #ifdef guards for CONFIG_DMI is kept for consistency with the other dmi_system_id definition in the same file. --- drivers/input/touchscreen/goodix.c | 31 ++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)