[net-next,v3,0/3] net: dsa: mt7530: Convert to PHYLINK and add support for port 5

Message

René van Dorst Sept. 2, 2019, 1:02 p.m. UTC

1. net: dsa: mt7530: Convert to PHYLINK API
   This patch converts mt7530 to PHYLINK API.
2. dt-bindings: net: dsa: mt7530: Add support for port 5
3. net: dsa: mt7530: Add support for port 5
   These 2 patches adding support for port 5 of the switch.

v2->v3:
 * Removed 'status = "okay"' lines in patch #2
 * Change a port 5 setup message in a debug message in patch #3
 * Added ack-by and tested-by tags
v1->v2:
 * Mostly phylink improvements after review.
rfc -> v1:
 * Mostly phylink improvements after review.
 * Drop phy isolation patches. Adds no value for now.

René van Dorst (3):
  net: dsa: mt7530: Convert to PHYLINK API
  dt-bindings: net: dsa: mt7530: Add support for port 5
  net: dsa: mt7530: Add support for port 5

 .../devicetree/bindings/net/dsa/mt7530.txt    | 214 ++++++++++
 drivers/net/dsa/mt7530.c                      | 371 +++++++++++++++---
 drivers/net/dsa/mt7530.h                      |  61 ++-
 3 files changed, 573 insertions(+), 73 deletions(-)

Comments

David Miller Sept. 4, 2019, 10:28 p.m. UTC | #1

From: René van Dorst <[e-mail]>
Date: Mon,  2 Sep 2019 15:02:23 +0200

> 1. net: dsa: mt7530: Convert to PHYLINK API
>    This patch converts mt7530 to PHYLINK API.
> 2. dt-bindings: net: dsa: mt7530: Add support for port 5
> 3. net: dsa: mt7530: Add support for port 5
>    These 2 patches adding support for port 5 of the switch.
> 
> v2->v3:
>  * Removed 'status = "okay"' lines in patch #2
>  * Change a port 5 setup message in a debug message in patch #3
>  * Added ack-by and tested-by tags
> v1->v2:
>  * Mostly phylink improvements after review.
> rfc -> v1:
>  * Mostly phylink improvements after review.
>  * Drop phy isolation patches. Adds no value for now.

Series applied.