diff mbox series

[V8,6/8] arm64: tegra: Enable xudc on Jetson TX1

Message ID 1567585440-13751-7-git-send-email-nkristam@nvidia.com (mailing list archive)
State Superseded
Headers show
Series Tegra XUSB gadget driver support | expand

Commit Message

Nagarjuna Kristam Sept. 4, 2019, 8:23 a.m. UTC 
Enable XUSB device mode driver for USB0 slot on Jetson TX1.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Reviewed-by: JC Kuo <jckuo@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 31 +++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

Comments

Chunfeng Yun Sept. 4, 2019, 9:47 a.m. UTC | #1 
On Wed, 2019-09-04 at 13:53 +0530, Nagarjuna Kristam wrote:
> Enable XUSB device mode driver for USB0 slot on Jetson TX1.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> Reviewed-by: JC Kuo <jckuo@nvidia.com>
> ---
>  arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 31 +++++++++++++++++++++++++-
>  1 file changed, 30 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> index a7dc319..6aba1ba 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
> @@ -1362,7 +1362,7 @@
>  				status = "okay";
>  
>  				lanes {
> -					usb2-0 {
> +					micro_b: usb2-0 {
>  						nvidia,function = "xusb";
>  						status = "okay";
>  					};
> @@ -1483,6 +1483,21 @@
>  		vmmc-supply = <&vdd_3v3_sd>;
>  	};
>  
> +	usb@700d0000 {
> +		status = "okay";
> +		phys = <&micro_b>;
> +		phy-names = "usb2";
> +		avddio-usb-supply = <&vdd_3v3_sys>;
> +		hvdd-usb-supply = <&vdd_1v8>;
> +		usb-role-switch;
> +
> +		port {
> +			usb_role_switch: endpoint {
> +				remote-endpoint = <&usb_b_conn_ep>;
> +			};
> +		};
> +	};
> +
>  	regulators {
>  		compatible = "simple-bus";
>  		#address-cells = <1>;
> @@ -1641,4 +1656,18 @@
>  			linux,code = <KEY_VOLUMEUP>;
>  		};
>  	};
> +
> +	usb_type_b: connector {
> +		compatible = "linux,usb-conn-gpio", "gpio-usb-b-connector";
please use "gpio-usb-b-connector" and "usb-b-connector", due to
"linux,usb-conn-gpio" is not supported now


> +		label = "micro-USB";
> +		type = "micro";
> +		vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
> +
> +		port {
> +			usb_b_conn_ep: endpoint {
> +				remote-endpoint = <&usb_role_switch>;
> +			};
> +		};
> +	};
> +
>  };
Nagarjuna Kristam Sept. 5, 2019, 4:32 a.m. UTC | #2 
On 04-09-2019 15:17, Chunfeng Yun wrote:
> On Wed, 2019-09-04 at 13:53 +0530, Nagarjuna Kristam wrote:
>> Enable XUSB device mode driver for USB0 slot on Jetson TX1.
>>
>> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
>> Reviewed-by: JC Kuo <jckuo@nvidia.com>
>> ---
>>  arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 31 +++++++++++++++++++++++++-
>>  1 file changed, 30 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> index a7dc319..6aba1ba 100644
>> --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
>> @@ -1362,7 +1362,7 @@
>>  				status = "okay";
>>  
>>  				lanes {
>> -					usb2-0 {
>> +					micro_b: usb2-0 {
>>  						nvidia,function = "xusb";
>>  						status = "okay";
>>  					};
>> @@ -1483,6 +1483,21 @@
>>  		vmmc-supply = <&vdd_3v3_sd>;
>>  	};
>>  
>> +	usb@700d0000 {
>> +		status = "okay";
>> +		phys = <&micro_b>;
>> +		phy-names = "usb2";
>> +		avddio-usb-supply = <&vdd_3v3_sys>;
>> +		hvdd-usb-supply = <&vdd_1v8>;
>> +		usb-role-switch;
>> +
>> +		port {
>> +			usb_role_switch: endpoint {
>> +				remote-endpoint = <&usb_b_conn_ep>;
>> +			};
>> +		};
>> +	};
>> +
>>  	regulators {
>>  		compatible = "simple-bus";
>>  		#address-cells = <1>;
>> @@ -1641,4 +1656,18 @@
>>  			linux,code = <KEY_VOLUMEUP>;
>>  		};
>>  	};
>> +
>> +	usb_type_b: connector {
>> +		compatible = "linux,usb-conn-gpio", "gpio-usb-b-connector";
> please use "gpio-usb-b-connector" and "usb-b-connector", due to
> "linux,usb-conn-gpio" is not supported now
> 
> 

Thanks for info, will update accordingly.

>> +		label = "micro-USB";
>> +		type = "micro";
>> +		vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
>> +
>> +		port {
>> +			usb_b_conn_ep: endpoint {
>> +				remote-endpoint = <&usb_role_switch>;
>> +			};
>> +		};
>> +	};
>> +
>>  };
> 
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index a7dc319..6aba1ba 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -1362,7 +1362,7 @@ 
 				status = "okay";
 
 				lanes {
-					usb2-0 {
+					micro_b: usb2-0 {
 						nvidia,function = "xusb";
 						status = "okay";
 					};
@@ -1483,6 +1483,21 @@ 
 		vmmc-supply = <&vdd_3v3_sd>;
 	};
 
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+		usb-role-switch;
+
+		port {
+			usb_role_switch: endpoint {
+				remote-endpoint = <&usb_b_conn_ep>;
+			};
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -1641,4 +1656,18 @@ 
 			linux,code = <KEY_VOLUMEUP>;
 		};
 	};
+
+	usb_type_b: connector {
+		compatible = "linux,usb-conn-gpio", "gpio-usb-b-connector";
+		label = "micro-USB";
+		type = "micro";
+		vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		port {
+			usb_b_conn_ep: endpoint {
+				remote-endpoint = <&usb_role_switch>;
+			};
+		};
+	};
+
 };